Study of the Standard k-ε Model for Tip Leakage Flow in an Axial Compressor Rotor
Authors:
- Yanfei GaoYGYanfei Gao
- Yangwei LiuYLYangwei Liu
- Luyang ZhongLZLuyang Zhong
- Jiexuan HouJHJiexuan Hou
- Lipeng LuLLLipeng Lu
- 1 January 2016
- journal article
- Published by Walter de Gruyter GmbH in International Journal of Turbo & Jet-Engines
- Vol. 33 (4)
Abstract
The standard k-ε model (SKE) and the Reynolds stress model (RSM) are employed to predict the tip leakage flow (TLF) in a low-speed large-scale axial compressor rotor. Then, a new research method is adopted to “freeze” the turbulent kinetic energy and dissipation rate of the flow field derived from the RSM, and obtain the turbulent viscosity using the Boussinesq hypothesis. The Reynolds stresses and mean flow field computed on the basis of the frozen viscosity are compared with the results of the SKE and the RSM. The flow field in the tip region based on the frozen viscosity is more similar to the results of the RSM than those of the SKE, although certain differences can be observed. This finding indicates that the non-equilibrium turbulence transport nature plays an important role in predicting the TLF, as well as the turbulence anisotropy.Keywords
This publication has 23 references indexed in Scilit:
- Investigation of model development for deterministic correlations associated with impeller-diffuser interactions in centrifugal compressorsScience China Technological Sciences, 2015
- On the nature of tip clearance flow in subsonic centrifugal impellersScience China Technological Sciences, 2013
- Modification of Spalart–Allmaras model with consideration of turbulence energy backscatter using velocity helicityPhysics Letters A, 2011
- Experimental Investigation of Unsteady Flow Field in the Tip Region of an Axial Compressor Rotor Passage at Near Stall Condition With Stereoscopic Particle Image VelocimetryJournal of Turbomachinery, 2004
- The 1993 IGTI Scholar Lecture: Loss Mechanisms in TurbomachinesJournal of Turbomachinery, 1993
- Measurement of the Three-Dimensional Tip Region Flow Field in an Axial CompressorJournal of Turbomachinery, 1993
- Experimental Study on the Three-Dimensional Flow Within a Compressor Cascade With Tip Clearance: Part II—The Tip Leakage VortexJournal of Turbomachinery, 1993
- Similarity Analysis of Compressor Tip Clearance Flow StructureJournal of Turbomachinery, 1991
- Structure of Tip Clearance Flow in an Isolated Axial Compressor RotorJournal of Turbomachinery, 1989
- Progress in the development of a Reynolds-stress turbulence closureJournal of Fluid Mechanics, 1975