Hybrid Cross-Laminated Timber under Bending: Finite Element Analysis Based on Nondestructive Testing
Open Access
- 15 January 2026
- journal article
- Published by Lukasiewicz Research Network - Poznan Technology Institute in Drewno. Prace Naukowe, Doniesienia, Komunikaty = Wood. Research Papers, Reports, Announcements
- Vol. 69 (217)
Abstract
The growing demand for wood as a raw material, coupled with the impacts of climate change on coniferous forests, necessitates research into underutilized wood species and potential hardwood alternatives. By integrating material characterisation with computational analysis, this research aims to bridge the gap between resource availability and structural performance. This study focuses on developing a numerical model to simulate the mechanical behavior of softwood, hardwood, and hybrid cross-laminated timbers (CLT) under bending loads within the linear elastic range. The research methodology involved finite element analysis to simulate four-point bending tests on hybrid CLT panels using the open-source FEM solver Code_Aster. Material properties were determined based on Non-Destructive Test (NDT) measurements and literature data. The developed finite element model successfully simulated CLT’s response under four-point bending conditions, demonstrating its potential for virtual prototyping of various underutilized wood species in CLT applications. The numerical model showed acceptable agreement with experimental results. The relative error varies between 1.30% to 17.37% in the results based on the NDT measurements. The results derived on literature values show higher variation. This computational approach provides a valuable tool for evaluating alternative wood species in engineered wood products.Keywords
This publication has 31 references indexed in Scilit:
- Coupling numerical and experimental methods to characterise the mechanical behaviour of the Mona Lisa: a method to enhance the conservation of panel paintingsJournal of Cultural Heritage, 2023
- Bending and shear performance of a cross-laminated composite consisting of flattened bamboo board and Chinese fir lumberConstruction and Building Materials, 2023
- Bending and shear properties of cross-laminated timber panels made of poplar (Populus alba)Construction and Building Materials, 2020
- Bending and shear performance of Australian Radiata pine cross-laminated timberConstruction and Building Materials, 2020
- Effects of combinations of lamina grade and thickness, and span-to-depth ratios on bending properties of cross-laminated timber (CLT) floorConstruction and Building Materials, 2019
- Seismic behavior of cross-laminated timber panel buildings equipped with traditional and innovative connectorsArchives of Civil and Mechanical Engineering, 2017
- Cross laminated timber (CLT): overview and developmentEuropean Journal of Wood and Wood Products, 2016
- Zur Orthotropie der physikalisch‐mechanischen Eigenschaften von RotbuchenholzBautechnik, 2015
- Moisture-induced stresses in spruce cross-laminatesEngineering Structures, 2010
- Three-dimensional elastic behaviour of common yew and Norway spruceWood Science and Technology, 2008