JGJózsef Garab

József Garab

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


József Garab has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Laminated Veneer Lumber (LVL) from Hungarian Underutilized Hardwood Species

    by Tibor L. Alpár, György Szili-Török, Péter György Horváth, László Bejó, József Garab

    This study evaluated the potential of two abundant but underutilized hardwood resources in Hungary—Turkey oak (Quercus cerris) and grey poplar (Populus canescens)—for laminated veneer lumber (LVL) production. The widely used hybrid poplar (Populus × euramericana cv. I-214) was included as a reference. LVL panels were manufactured using rotary-cut veneers bonded with melamine urea formaldehyde (MUF) and phenol formaldehyde (PF) adhesives. Mechanical performance was assessed through bending strength (MOR), apparent modulus of elasticity (MOEapp), internal bond strength (IB), and density. Turkey oak exhibited high mechanical performance, with group mean MOR values ranging from 114.70 to 149.73 MPa and MOEapp values from 12.68 to 14.63 GPa, while PF-bonded panels generally showed improved mechanical and bonding performance. Grey poplar LVLs achieved group mean MOR values of 64.29–80.68 MPa and MOEapp values of 7.14–8.17 GPa. Hybrid poplar LVLs achieved group mean MOR values of 62.56–68.91 MPa and MOEapp values of 6.66–8.25 GPa. Group mean internal bond strength ranged from 0.59 to 1.02 MPa for poplar-based LVLs and from 1.21 to 1.94 MPa for Turkey oak LVLs. The findings provide preliminary evidence of the potential of Turkey oak and grey poplar for LVL production and provide a basis for further investigation.

  • Open Access

    Mitigating Supply Chain Disruptions in Plywood Manufacturing by Deadline Reordering

    by Olivér Ősz, József Garab, Máté Hegyháti, Balázs Dávid

    Disruptions in supply networks have caused many logistical and planning challenges in the last few years. The previous predictability of the shipping times of raw materials changed drastically due to various global issues, which affected many production areas, including the wood industry. This work is motivated by a case study of a Central European plywood production facility, where supply-side disruptions caused difficulties in meeting deadlines for downstream companies of the construction and furniture industry. As a result, the objective of production planners shifted towards mitigating the financial burden caused by cancellation penalties. Three MILP (Mixed-Integer Linear Programming) models and a genetic algorithm were developed to tackle the scheduling of a plywood production plant with raw material shipments and order deadlines. The novelty of the considered problem lies in the flexibility of swapping order deadlines from the same client, which was inspired by the real-life deals of the aforementioned company. The methods were tested on 120 benchmark instances of different sizes generated from real industrial data. The genetic algorithm terminated within 60 s for all instances and found the optimal or best-known solution in 71 of 80 short-horizon instances, while also remaining efficient on larger 30-day cases. As the solution approach is not specific to plywood production, it can be applied to scheduling problems in other fields as well, where similar disruptions can develop, and the production process features are covered by the Multi-Mode Resource-Constrained Project Scheduling Problem class.

  • Open Access

    Screw Withdrawal Performance of Hybrid Cross-Laminated Timber (CLT) Manufactured from Spruce (Picea abies), Beech (Fagus sylvatica) and Hungarian Poplar (Populus spp.)

    by József Garab, Zsolt György Tóth, Ahmed Altaher Omer Ahmed, László Bejó

    Screw withdrawal force is a key mechanical property related to the load-bearing capacity and reliability of mechanically fastened timber structures. This study investigates the screw withdrawal performance of cross-laminated timber (CLT) manufactured from spruce, beech, and poplar, including both homogeneous and hybrid layups. The selected species represent materials with different densities and regional availability in Hungary. A one-component polyurethane adhesive was used for panel manufacturing. Screw withdrawal force was determined using two methods: a universal testing machine (UTM) and a manual portable device (MPD). The highest withdrawal forces were observed in beech-based configurations, while the lowest values were measured for spruce. Poplar-based configurations demonstrated intermediate but competitive performance, exceeding the reference spruce values. Statistical evaluation confirmed a significant effect of layup configuration on withdrawal resistance. The MPD measurements were on average approximately 9% higher than UTM results, indicating a consistent and quantifiable inter-method difference. The results demonstrate that hybrid CLT configurations can be optimized by combining species of different densities and that portable testing methods provide reliable estimates of withdrawal performance. These findings contribute to the understanding of connection behavior in hybrid CLT and support the practical application of semi-destructive testing methods for in-situ assessment.

  • Open Access

    Hybrid Cross-Laminated Timber under Bending: Finite Element Analysis Based on Nondestructive Testing

    by József Garab, László Bejó, Tamás Király

    The growing demand for wood as a raw material, coupled with the impacts of climate change on coniferous forests, necessitates research into underutilized wood species and potential hardwood alternatives. By integrating material characterisation with computational analysis, this research aims to bridge the gap between resource availability and structural performance. This study focuses on developing a numerical model to simulate the mechanical behavior of softwood, hardwood, and hybrid cross-laminated timbers (CLT) under bending loads within the linear elastic range. The research methodology involved finite element analysis to simulate four-point bending tests on hybrid CLT panels using the open-source FEM solver Code_Aster. Material properties were determined based on Non-Destructive Test (NDT) measurements and literature data. The developed finite element model successfully simulated CLT’s response under four-point bending conditions, demonstrating its potential for virtual prototyping of various underutilized wood species in CLT applications. The numerical model showed acceptable agreement with experimental results. The relative error varies between 1.30% to 17.37% in the results based on the NDT measurements. The results derived on literature values show higher variation. This computational approach provides a valuable tool for evaluating alternative wood species in engineered wood products.

  • Open Access

    The Bending Properties of Hybrid Cross-Laminated Timber (CLT) Using Various Species Combinations

    by Ahmed Altaher Omer Ahmed, József Garab, Erika Horváth-Szováti, János Kozelka, László Bejó

    Cross-laminated timber (CLT) has become a massive commercial success in recent years due to its high performance, technological advantages, and low environmental impact. The finite softwood raw material supply has motivated researchers to find alternatives. This study presents an investigation of the viability of some Hungarian hardwood materials, such as CLT materials. Homogeneous beech, poplar, and spruce panels, as well as their combinations, were created using a polyurethane adhesive. The experimental results show the clear potential of Hungarian poplar, which performed much better than spruce. Poplar’s modulus of elasticity (MOE) and modulus of rupture (MOR) values reached or exceeded those of high-grade commercial softwood CLT. The bending properties of beech and hybrid beech–poplar panels far exceeded the performance of commercial panels, which shows the excellent potential of high-density hardwoods for high-performance CLT production. Beech–spruce hybrid panels seriously underperformed. This was caused by gluing issues, probably due to the large density differences between the two species, as evidenced by the glueline failure exhibited by most of these specimens during testing. The average panel density proved to be the best predictor of mechanical performance, except for beech–spruce hybrid panels.