A unified method to generate representative volume elements with tailored random fibre arrangements to estimate the shear and transverse behaviours of unidirectional continuous fibres composite plies
Authors:
- 12 November 2024
- journal article
- research article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 59 (6) , 793-805
Abstract
Axial compressible strength is a key design parameter of CFRP laminate structures, especially for Aerospace where maximum flexure on wings is driven by the global margin of safety on compressive loads. One of its main limiting contributors is the non-linear shear behaviour of the unidirectional ply. This shear response can be predicted by using generated (quasi-)random microstructures set within representative volume elements (RVE). Different microstructures with or without clusters of fibres (resulting from manufacturing processes) are necessary to quantify the mechanical variability. The variability of the microstructures is characterised by the variation of the arrangement, the volume fraction and the misalignment of the fibres. This leads to significant variations in the mechanical performance, in particular for the shear behaviour. In this study, we propose a unified algorithm that makes it possible to generate all the different positions of fibres in microstructures with very high fibre volume fractions. The microstructural parameters responsible for variations in mechanical behaviour are identified to establish a correlation between fibre distribution and the mechanical response. Finally, a composite cross-section is analysed to estimate the local non-linear shear behaviour as well as the compressive strength as an example to illustrate the benefit of complex microstructures modelling.Keywords
This publication has 36 references indexed in Scilit:
- Influence of Microstructure Randomness on the Shear Behaviour and Compressive Strength of Continuous Carbon Fibre CompositesApplied Composite Materials, 2024
- Generation of artificial 2-D fiber reinforced composite microstructures with statistically equivalent featuresComposites Part A: Applied Science and Manufacturing, 2022
- On the determination of the elastic constants of carbon fibres by nanoindentation testsCarbon, 2021
- Micromechanical analysis of composites with fibers distributed randomly over the transverse cross-sectionActa Astronautica, 2018
- Compressive failure analysis of unidirectional carbon/epoxy composite based on micro-mechanical modelsChinese Journal of Aeronautics, 2017
- Effects of inter-fiber spacing and thermal residual stress on transverse failure of fiber-reinforced polymer–matrix compositesComputational Materials Science, 2013
- On the Size of RVE in Finite Elasticity of Random CompositesJournal of Elasticity, 2006
- Compressive failure of fibre compositesJournal of the Mechanics and Physics of Solids, 1993
- On the high compressive strains achieved in bending tests on unidirectional carbon-fibre/epoxyComposites Science and Technology, 1992
- The effect of fibre misalignment on the compressive strength of unidirectional carbon fibre/epoxyComposites, 1990