COMSOL Results for the Nominal Steady-State Operation of the Proposed 95-MW LEU Silicide Core for HFIR Conversion
Authors:
- UsdoeUSUsdoe
- Molly RossMRMolly Ross
- Oak Ridge Oak Ridge National Laboratory (Ornl)O(Oak Ridge Oak Ridge National Laboratory (Ornl)
- Prashant K. JainPJPrashant K. Jain
Open Access
- 1 April 2025
- report
- Published by Office of Scientific and Technical Information (OSTI)
Abstract
Engineering design studies are being performed to determine the feasibility of converting the High Flux Isotope Reactor (HFIR) from highly enriched uranium (HEU) to low-enriched uranium (LEU) fuel at Oak Ridge National Laboratory. This activity is sponsored by the Office of Reactor Conversion and Uranium Supply (ORCUS) under the auspices of the US Department of Energy National Nuclear Security Administration’s Office of Material Management and Minimization. HFIR is a very high flux, pressurized, light water–cooled and moderated, flux trap–type research reactor with a core made of involute shaped U3O8/Al cermet fuel plates and coolant channels. HFIR currently operates at a thermal power of 85 MW and supports key national and international missions in neutron scattering, isotope production, materials/fuels irradiation, neutron activation analysis, gamma irradiation, and neutrino research. Advanced multiphysics computational fluid dynamics models have been developed in the COMSOL Multiphysics software to simulate the steady-state operating conditions for the proposed lowand high-density LEU U3Si2-Al (uranium silicide dispersion) fuel designs. The COMSOL models for HFIR inner and outer fuel element models incorporate various essential inputs and physics such as spatially dependent nuclear heat deposition, multilayer heat conduction, conjugate heat transfer, turbulent flows (using Reynolds-averaged Navier Stokes turbulence models), structural mechanics (thermal–structural interactions and fuel swelling), and oxide layer build-up. This report presents the best-estimate thermal hydraulics results for the low- and high-density optimized silicide LEU core designs at 95 MW steady-state nominal operation.Keywords
Funding Information
- USDOE (AC05-00OR22725)
This publication has 9 references indexed in Scilit:
- Automated reactor physics analysis framework of High Flux Isotope Reactor low-enriched uranium silicide dispersion fuel designsNuclear Engineering and Design, 2023
- High Flux Isotope Reactor Low-Enriched Uranium Low Density Silicide Fuel Design Parameters2021
- The Scientific Justification for a U.S. Domestic High-Performance Reactor-Based Research Facility2020
- Key metrics for HFIR HEU and LEU models2016
- Cold-Cracking Assessment in AA7050 Billets during Direct-Chill Casting by Thermomechanical Simulation of Residual Thermal Stresses and Application of Fracture MechanicsMetallurgical and Materials Transactions A, 2009
- Mechanical Properties of DU-xMo Alloys with x = 7 to 12 Weight PercentMetallurgical and Materials Transactions A, 2009
- Thermal-Hydraulic Bases for the Safety Limits and Limiting Safety System Settings for HFIR Operation at 100 MW and 468 psig Primary Pressure, Using Specially Selected Fuel Elements1998
- Analysis of Loss-of-Coolant Accidents in the High-Flux Isotope ReactorNuclear Technology, 1996
- EFFECT OF HEAT FLUX ON THE CORROSION OF ALUMINUM BY WATER. PART III. FINAL REPORT ON TESTS RELATIVE TO THE HIGH-FLUX ISOTOPE REACTOR1961