Mechanochemically Activated Ternary Mineral-Waste Modifier for High-Performance Concrete
Authors:
- Ruslan E. NurlybayevRNRuslan E. Nurlybayev
- Axaya S. YestemessovaAYAxaya S. Yestemessova
- Zaure N. AltayevaZAZaure N. Altayeva
- Yelzhan S. OrynbekovYOYelzhan S. Orynbekov
- Aktota A. MurzagulovaAMAktota A. Murzagulova
- Maxat Z. BulenbayevMBMaxat Z. Bulenbayev
- Bakytkul U. YerkebayevaBYBakytkul U. Yerkebayeva
- Indira B. TashmukhanbetovaIndira B. Tashmukhanbetova
Preprint
- 27 August 2026
- preprint
- Published by MDPI AG in Preprints.org
Abstract
This article presents the results of a research study on the development and evaluation of a mineral modifying additive for concrete produced from mineral-processing tailings, shale waste from shungite production, and silica fume. Compositions of both the modifying additive and concretes based on it were developed. The properties of the mineral modifying additive were studied; mechanochemical activation was applied to increase and modify its activity, and its pozzolanic activity was determined. Depending on the component ratio, CaO absorption ranged from 7.9% to 94%. In the technology of high-strength and functional concretes, high-carbon slag with a fraction of 10-20 mm was used as a partial replacement for natural coarse aggregate. The introduction of 3-15% mineral modifying additive into B40 concrete increased the 28-day compressive strength by 0.19-16%. The greatest increase was observed for concrete containing 8% mineral modifying additive by cement mass. Because compressive strength is not directly correlated with freeze-thaw resistance and water impermeability, capillary suction tests were performed. This non-destructive durability indicator makes it possible to assess concrete permeability, characterize the pore structure, indirectly evaluate freeze-thaw resistance through water-absorption behavior, and estimate the potential resistance of concrete to repeated freezing and thawing. After 24 h, the maximum increase in capillary suction ranged from 4.13% to 5.17%. Direct freeze-thaw testing confirmed freeze-thaw resistance grade F400. Three main criteria were used to assign the freeze-thaw resistance grade: average mass loss not exceeding 2%, compliance with the compressive-strength ratio XminII >= 0.9 XminI, and absence of cracks, spalling, and edge scaling on the specimens.Keywords
All Related Versions
- Version 1, 2026-08-27, Preprints
- Published version: Materials, 19 (19), 4164.
This publication has 27 references indexed in Scilit:
- Corrosion evaluation of steel bars in modified fully-recycled coarse aggregate concrete subjected to freeze–thaw cyclesConstruction and Building Materials, 2026
- Multiscale study on concrete preparation using Na₂CO₃ synergistically with silica fume to solidify waste incineration bottom ash fine aggregatesConstruction and Building Materials, 2026
- Enhancing pervious concrete with recycled brick–concrete aggregates through composite modification under freeze–thaw and sulfate conditionsConstruction and Building Materials, 2025
- Effect of CO2 curing on the resistance of calcium sulfoaluminate cement paste to elevated temperatureConstruction and Building Materials, 2024
- Recent advances in nano-modified concrete: Enhancing durability, strength, and sustainability through nano silica (nS) and nano titanium (nT) incorporationApplications in Engineering Science, 2024
- Evaluation of thermal and freeze-thaw resistances of the concretes with the silica fume addition at different water-cement ratioCase Studies in Construction Materials, 2023
- Influence of metakaolin on the hydration and microstructure evolution of cement paste during the early stageApplied Clay Science, 2022
- Estimating compressive strength of modern concrete mixtures using computational intelligence: A systematic reviewConstruction and Building Materials, 2021
- Co-addition of metakaolin and silica fume in mortar: effects and advantagesConstruction and Building Materials, 2019
- Performances evaluation of binary concrete designed with silica fume and metakaolinConstruction and Building Materials, 2018