Tribological performance and wear prediction of spur gears lubricated with palm oil and lithium grease: A hybrid physics-informed machine learning approach
- 28 October 2026
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
Abstract
Gear wear prediction and sustainable lubrication are critical for Industry 4.0 predictive maintenance. In this study, spur gear wear under lubrication with palm oil and a lithium complex grease was evaluated using a Taguchi L32 design and ANOVA. Results showed palm oil outperformed grease, yielding lower mass losses (6–17 mg vs. 9–18 mg), with minimum loss (6–8 mg) at 192 rpm. Vibration analysis revealed lower Root Mean Square (RMS) values for palm oil at 480 rpm (0.0017–0.0081 mm) than grease (0.0033–0.0119 mm), while grease reached Peak-to-Peak amplitudes up to 0.034 mm. Taguchi S/N ratio analysis identified optimal conditions (palm oil, 192 rpm, 40 min) with palm oil achieving a higher mean S/N ratio (39.7 vs. 37.5). ANOVA indicated significant contributions from duration (20.96%, p = 0.037) and lubricant type (16.76%, p = 0.009). In contrast, 50.54% unexplained error highlighted complex interactions. To address data constraints, 32 physical samples were augmented using the Archard equation, yielding a total of 192 samples. A CatBoost model trained via 5-fold GroupKFold cross-validation achieved high accuracy in the LOW wear regime (mean R 2 logK = 0.7198, linear R 2 K = 0.6994, MSE logK = 0.0092, linear RMSE K = 6.9 × 10 −9 ). Conversely, the HIGH wear regime exhibited non-linear instability (mean R 2 logK = −2.7017, linear R 2 K = −11.7590). Feature importance confirmed regime-dependent behavior: revolutions (∼28%) and duration (∼22%) dominated in the LOW regime, whereas sliding distance (∼90%) dominated in the HIGH regime. Overall, this hybrid physics-informed ML approach robustly predicts gear wear under stable operating conditions while identifying critical wear-transition boundaries.Keywords
This publication has 32 references indexed in Scilit:
- Design and optimization of reinforced weave patterns in jute-epoxy composites for improved mechanical and wear properties using response surface methodologyJournal of Materials Research and Technology, 2026
- Machine Learning-Based Prediction of Mechanical Properties of Epoxy Composites Reinforced with Linz–Donawitz SlagJournal of Materials Engineering and Performance, 2026
- Sliding wear characterization of cenosphere nano particle filled epoxy composites using response surface method and finite element methodMaterialwissenschaft und Werkstofftechnik, 2026
- A Review of Gear Failure Analysis: Classification, Inspection Methods, and Literature-Based Case StudiesJournal of Failure Analysis and Prevention, 2026
- Bio-based additives in lubricants: addressing challenges and leveraging for improved performance toward sustainable lubricationBiomass Conversion and Biorefinery, 2025
- Comparative analysis of different machine learning algorithms in prediction of cutting force using hybrid nanofluid enriched cutting fluid in turning operationMaterials Today: Proceedings, 2023
- Wear analysis and simulation of small module gear based on Archard modelEngineering Failure Analysis, 2022
- A review on bio-based lubricants and their applicationsJournal of Cleaner Production, 2017
- Assessment of surface contact fatigue failure in a spur geared system based on the tribological and vibration parameter analysisMeasurement, 2015
- Static and dynamic simulations of mild abrasive wear in wide-faced solid spur and helical gearsMechanism and Machine Theory, 2010