Fatigue, fracture toughness and DMA of biosilica toughened epoxy with stacked okra fiber and Al 2024‐T3 fiber metal laminate composite
- 27 July 2022
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 43 (9) , 6300-6309
Abstract
In this present study, a natural fiber‐based fiber metal laminate (FML) was fabricated for various engineering applications. The primary aim of this present investigation was to study the effect of adding natural fiber along with metal and the effect of the surface‐treatment process on the reinforcements on load‐bearing and thermo‐mechanical properties. Okra fiber woven mat, aluminum 2024‐T3 foil and rice husk‐derived biosilica were used as reinforcements. For surface treatment, the metal foil was sandblasted whereas the okra fiber and biosilica were silane‐treated. The FML was fabricated using the vacuum bag method utilizing as‐received and silane‐treated reinforcements as two separate models. According to the results, the addition of Al foil and okra fiber improved the storage modulus and loss factor of about 4.2 GPa and 0.39 for surface‐treated reinforcements. Similarly, maximum fracture toughness and energy release of 39.42 MPa √m and 0.76 MJ/m2 for surface‐treated EOA2 composite designation. Moreover, the addition of okra fiber and Al foil increased the fatigue life counts up to 54,266, 48,116, and 26,263 for surface‐treated EOA2 composite at 30%, 60%, and 90% of ultimate tensile stress (UTS). Such thermo‐mechanical and load‐bearing properties improved FMLs could be used in automotive, aircraft, drone and other industrial applications requiring high structural rigidity and load absorbing capability.Keywords
This publication has 26 references indexed in Scilit:
- Mechanical, thermal and fatigue behaviour of surface-treated novel Caryota urens fibre–reinforced epoxy compositeBiomass Conversion and Biorefinery, 2020
- Visco-Elastic, Thermal, Antimicrobial and Dielectric Behaviour of Areca Fibre-Reinforced Nano-silica and Neem Oil-Toughened Epoxy Resin Bio CompositeSilicon, 2020
- Thermo-Mechanical and Wear Behaviour of Surface-Treated Pineapple Woven Fibre and Nano-Silica Dispersed Mahua Oil Toughened Epoxy CompositeSilicon, 2020
- Study of the influence of the type of matrix used in carbon-epoxy composites on fatigue delamination under mode III fractureMaterials & Design, 2020
- Effect of Silicon Coupling Grafted Ferric Oxide and E-Glass Fibre in Thermal Stability, Wear and Tensile Fatigue Behaviour of Epoxy Hybrid CompositeSilicon, 2019
- Enhanced Thermal and Dynamic Mechanical Properties of Synthetic/Natural Hybrid Composites with Graphene NanoplateletesPolymers, 2019
- Fabrication and characterization of echinoidea spike particles and kenaf natural fibre-reinforced Azadirachta-Indica blended epoxy multi-hybrid bio compositeComposites Part A: Applied Science and Manufacturing, 2019
- Flexural, thermal and dynamic mechanical properties of date palm fibres reinforced epoxy compositesJournal of Materials Research and Technology, 2019
- Inter laminar shear strength behavior of acid, base and silane treated E-glass fibre epoxy resin composites on drilling processDefence Technology, 2017
- Thermo-mechanical characterization of siliconized E-glass fiber/hematite particles reinforced epoxy resin hybrid compositeApplied Surface Science, 2016