Numerical Simulation of Ultrasonic Field During Five-Source Ultrasound-Assisted Casting of 2219 Al Alloy
Open Access
Abstract
In this study, the distribution of the acoustic pressure field and cavitation threshold region in Al alloy casting under two five-source ultrasound arrangements (A and B) is investigated, aiming to optimize the five-source ultrasound configuration to improve casting quality. Numerical simulations were conducted using COMSOL software (COMSOL Multiphysics 6.0) to analyze the propagation characteristics of ultrasound in the Al melt and its influence on the cavitation effect under the two arrangements. The simulation results indicate that the cavitation threshold region for arrangement A is slightly larger than that for arrangement B. Furthermore, arrangement A demonstrates superior performance in terms of the uniformity of sound pressure distribution and the reduction in the cavitation threshold. Based on the simulation results, arrangement A was selected for experimental validation. The experimental results reveal that arrangement A, with a radial rod distance (L) of 200 mm from the center point and an insertion depth (H) of 270 mm, significantly refines the grains and improves the distribution of the second phase, thereby confirming the reliability of the simulation results. This study provides a theoretical foundation and practical guidance for the application of five-source ultrasound in Al alloy casting.Keywords
Funding Information
- Natural Science Foundation of Hunan Province (2024JJ5439)
- Key Research and Development Plan of Hunan Province (2024JK2087)
- Project of State Key Laboratory of Precision Manufacturing for Extreme Service Performance, Central South University (ZZYJKT2025-05)
This publication has 44 references indexed in Scilit:
- Fundamentals of Ultrasonic Treatment of Aluminum AlloysInternational Journal of Metalcasting, 2024
- Microstructural refinement in ultrasonically modified A356 aluminum castingsJournal of Materials Science, 2023
- Numerical Simulation and Casting Experiments on Particle Dispersion in 2219 Al Alloy by Introducing Al–5Ti–1B and Ultrasonic TreatmentInternational Journal of Metalcasting, 2023
- Distribution pattern of acoustic and streaming field during multi-source ultrasonic melt treatment processChina Foundry, 2023
- Numerical simulation of DC casting of large-size rare earth magnesium alloy ingot under low-frequency electromagnetic fieldThe International Journal of Advanced Manufacturing Technology, 2022
- Grain-Refinement and Mechanical Properties Optimisation of A356 Casting Al by Ultrasonic-Assisted Friction Stir ProcessingMetals and Materials International, 2021
- A Comparative Study on the Effect of Four-Source Ultrasonic Power on the Microstructure and Mechanical Properties of Large-Scale 2219 Aluminum IngotsJOM, 2019
- Analysis of the critical pressure of cavitation bubblesMeccanica, 2017
- Effect of Input Power and Temperature on the Cavitation Intensity During the Ultrasonic Treatment of Molten AluminiumTransactions of the Indian Institute of Metals, 2015
- A Simple Model of the Mold Boundary Condition in Direct-Chill (DC) Casting of Aluminum AlloysMetallurgical and Materials Transactions B, 2012