Renjun Hu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Renjun Hu has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Ripeng Jiang
Light Alloy Research Institute, Central South University, Changsha, China
4 shared publications - Ruiqing Li
Light Alloys Research Institute, Central South University, Changsha 410012, China
3 shared publications - Xiaoqian Li
Research Institute of Light Alloy, Central South University, Changsha 410083, China
2 shared publications Aolei Fu
1 shared publication- Chengqun Zhou
School of Power Electrical Engineering, Luoyang Institute of Science and Technology, Luoyang 471003, China
1 shared publication Chenyuan Zhang
1 shared publication
Latest Publications
- Open Access
Numerical Simulation of Ultrasonic Field During Five-Source Ultrasound-Assisted Casting of 2219 Al Alloy
In this study, the distribution of the acoustic pressure field and cavitation threshold region in Al alloy casting under two five-source ultrasound arrangements (A and B) is investigated, aiming to optimize the five-source ultrasound configuration to improve casting quality. Numerical simulations were conducted using COMSOL software (COMSOL Multiphysics 6.0) to analyze the propagation characteristics of ultrasound in the Al melt and its influence on the cavitation effect under the two arrangements. The simulation results indicate that the cavitation threshold region for arrangement A is slightly larger than that for arrangement B. Furthermore, arrangement A demonstrates superior performance in terms of the uniformity of sound pressure distribution and the reduction in the cavitation threshold. Based on the simulation results, arrangement A was selected for experimental validation. The experimental results reveal that arrangement A, with a radial rod distance (L) of 200 mm from the center point and an insertion depth (H) of 270 mm, significantly refines the grains and improves the distribution of the second phase, thereby confirming the reliability of the simulation results. This study provides a theoretical foundation and practical guidance for the application of five-source ultrasound in Al alloy casting.
Open AccessNumerical Simulation of Ultrasonic Field During Five-Source Ultrasound-Assisted Casting of 2219 Al Alloy
In this study, the distribution of the acoustic pressure field and cavitation threshold region in Al alloy casting under two five-source ultrasound arrangements (A and B) is investigated, aiming to optimize the five-source ultrasound configuration to improve casting quality. Numerical simulations were conducted using COMSOL software (COMSOL Multiphysics 6.0) to analyze the propagation characteristics of ultrasound in the Al melt and its influence on the cavitation effect under the two arrangements. The simulation results indicate that the cavitation threshold region for arrangement A is slightly larger than that for arrangement B. Furthermore, arrangement A demonstrates superior performance in terms of the uniformity of sound pressure distribution and the reduction in the cavitation threshold. Based on the simulation results, arrangement A was selected for experimental validation. The experimental results reveal that arrangement A, with a radial rod distance (L) of 200 mm from the center point and an insertion depth (H) of 270 mm, significantly refines the grains and improves the distribution of the second phase, thereby confirming the reliability of the simulation results. This study provides a theoretical foundation and practical guidance for the application of five-source ultrasound in Al alloy casting.
- 13 August 2025
- Published by Springer Nature in International Journal of Metalcasting
- Vol. 20 (3) , 1980-1994
Effect of TiB2 Content on Microstructure and Properties of TiB2/High-Fe-Content A380 Composites
- 13 August 2025
- Published by Springer Nature in International Journal of Metalcasting
- Vol. 20 (3) , 1980-1994
Effect of TiB2 Content on Microstructure and Properties of TiB2/High-Fe-Content A380 Composites
- 10 September 2023
- Published by Springer Nature in International Journal of Metalcasting
- Vol. 18 (2) , 1710-1722
Numerical Simulation and Casting Experiments on Particle Dispersion in 2219 Al Alloy by Introducing Al–5Ti–1B and Ultrasonic Treatment
- 10 September 2023
- Published by Springer Nature in International Journal of Metalcasting
- Vol. 18 (2) , 1710-1722
Numerical Simulation and Casting Experiments on Particle Dispersion in 2219 Al Alloy by Introducing Al–5Ti–1B and Ultrasonic Treatment
- Open Access
Effect of Ultrasonic-Assisted Casting on the Hydrogen and Lithium Content of Al-Li Alloy
Dehydrogenation of the 2195 Al–Li alloy was accomplished using argon degassing, ultrasonic degassing, and vacuum degassing. The concentration of hydrogen, its microstructure, and its mechanical characteristics were all investigated. The hydrogen content in the 2195 Al–Li alloy is high. The degassing process significantly improved the mechanical properties of the cast alloy, owing the removal of hydrogen. Among the three degassing techniques, ultrasonic argon treatment was an efficient dehydrogenation approach and an effective procedure for enhancing the microstructure while minimizing lithium loss in the Al–Li alloy. On the one hand, ultrasonic waves can dissolve purged argon bubbles, allowing them to degas more efficiently. On the other hand, ultrasonic waves may cause a large number of cavitation bubbles to form in the melt, which should be the cause of the microstructure refinement. The dynamics of rising argon bubbles and ultrasonic effects are involved in ultrasonic argon treatments such as cavitation and flow.
Open AccessEffect of Ultrasonic-Assisted Casting on the Hydrogen and Lithium Content of Al-Li Alloy
Dehydrogenation of the 2195 Al–Li alloy was accomplished using argon degassing, ultrasonic degassing, and vacuum degassing. The concentration of hydrogen, its microstructure, and its mechanical characteristics were all investigated. The hydrogen content in the 2195 Al–Li alloy is high. The degassing process significantly improved the mechanical properties of the cast alloy, owing the removal of hydrogen. Among the three degassing techniques, ultrasonic argon treatment was an efficient dehydrogenation approach and an effective procedure for enhancing the microstructure while minimizing lithium loss in the Al–Li alloy. On the one hand, ultrasonic waves can dissolve purged argon bubbles, allowing them to degas more efficiently. On the other hand, ultrasonic waves may cause a large number of cavitation bubbles to form in the melt, which should be the cause of the microstructure refinement. The dynamics of rising argon bubbles and ultrasonic effects are involved in ultrasonic argon treatments such as cavitation and flow.