Method for Analytical Calculation of the Formability from Metallic Bipolar Plates
Open Access
- 19 December 2019
- journal article
- research article
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 4 (1) , 1
Abstract
The constructive design of a flow field layout and the channel cross section parameters from a metallic half- or bipolar plate can have a significant influence on the performance characteristics of a fuel cell. One important aspect in the dimensioning of the channel geometry of half plates is the technical forming feasibility. In this article, first an equation is presented, which enables an analytical calculation of the channel parameters. Hereby, continuing calculations with parameter variations will be possible. Furthermore, the formability of the channel geometry of metallic half plates is evaluated through numerical and experimental investigations. Based on the results, an analytical model approach will be derived that enables an appraisal of the formability from channel cross section contours in an early development state. As a final step, the results of the numerical investigations and the analytical calculation method are compared and evaluated with the results of experimental investigations and other publications. It will be shown, that the derived analytical model approach has a good approximation compared to the effects and results from the numerical and experimental analysis. In particular, the assessment of whether a channel cross section can be manufactured safely is a result with high probability of the analytical model approach. Imprecisions happen, especially in variants with extreme geometries, for example, with very small radii or a huge channel depth. For this kind of variations, the analytical model behaves too sensitively, which makes it more difficult to estimate the damage effects. However, at an early development state, the analytical model offers a good method to get a pre-evaluation of the formability of channel cross sections with a simultaneous parameter variation possibility.Keywords
Funding Information
- Federal Ministry of Transport and Digital Infrastructure (BMVi) (03B11007A)
This publication has 24 references indexed in Scilit:
- Formability and flow channel design for thin metallic bipolar plates in PEM fuel cells: ModelingInternational Journal of Energy Research, 2018
- Flow channel design for metallic bipolar plates in proton exchange membrane fuel cells: ExperimentsEnergy Conversion and Management, 2018
- Two-stage forming approach for manufacturing ferritic stainless steel bipolar plates in PEM fuel cell: Experiments and numerical simulationsInternational Journal of Hydrogen Energy, 2017
- Evaluation of Effective Parameters on Stamping of Metallic Bipolar PlatesProcedia Engineering, 2017
- Numerical investigation of formed residual stresses and the thickness of stainless steel bipolar plate in PEMFCInternational Journal of Hydrogen Energy, 2016
- Effect of Channel Geometry on Formability of 304 Stainless Steel Bipolar Plates for Fuel Cells—Simulation and ExperimentsJournal of Fuel Cell Science and Technology, 2015
- Effect of flow-field dimensions on the formability of Fe–Ni–Cr alloy as bipolar plate for PEM (proton exchange membrane) fuel cellEnergy, 2015
- Design and manufacturing of stainless steel bipolar plates for proton exchange membrane fuel cellsInternational Journal of Hydrogen Energy, 2014
- Forming Metallic Micro-Feature Bipolar Plates for Fuel Cell Using Combined Hydroforming and Stamping ProcessesIranica Journal of Energy and Environment, 2013
- Fabrication of Metallic Bipolar Plates for Proton Exchange Membrane Fuel Cell by Flexible Forming Process-Numerical Simulations and ExperimentsJournal of Fuel Cell Science and Technology, 2010