Analysis of Novel Porosity–Water-to-Binder Index for Prediction of Strength, Stiffness and Durability for Cemented Soils
Open Access
- 22 September 2023
- Vol. 16 (19) , 6354
Abstract
The initial weight and volume relationships are crucial factors in determining the strength, stiffness, and durability of cement-stabilized soils. The porosity/binder ratio has been widely used as a control parameter for stabilized soil mixtures. However, this approach does not take into consideration the water content used during the stabilization process, which can impact the strength and durability of the final product. To address this issue, this paper introduces the porosity–water/binder relationship as a new parameter to predict the strength, stiffness (Go), and durability against wetting–drying cycles of artificially cemented soils. The strengths, Go, and accumulated losses of mass (ALM) of different stabilized soils were compared based on this new parameter, and the comprehensive results were analyzed to demonstrate its effectiveness. The findings indicate that the new parameter is a suitable design parameter for soil–lime, soil–cement, and geopolymerized soil mixtures. Furthermore, it was determined that the water content has no effect on the splitting tensile strength to compressive strength ratio. The results of this study offer valuable insights into the optimization of stabilized soils and the development of improved soil stabilization processes.Keywords
Funding Information
- Fundación Universitaria Los Libertadores—Colombia (FULL) (ING-08-23)
This publication has 44 references indexed in Scilit:
- Why is the future ready for environmental geotechnics?Environmental Geotechnics, 2016
- Key parameters for strength control of rammed sand–cement mixtures: Influence of types of portland cementConstruction and Building Materials, 2013
- Effect of the Porosity/Cement Ratio on the Compression of Cemented SoilJournal of Geotechnical and Geoenvironmental Engineering, 2012
- Key parameters for tensile and compressive strength of silt–lime mixturesGéotechnique Letters, 2012
- Parameters controlling stiffness and strength of artificially cemented soilsGéotechnique, 2012
- Voids/Cement Ratio Controlling Tensile Strength of Cement-Treated SoilsJournal of Geotechnical and Geoenvironmental Engineering, 2011
- Parameters Controlling Tensile and Compressive Strength of Artificially Cemented SandJournal of Geotechnical and Geoenvironmental Engineering, 2010
- Key parameters dictating strength of lime/cement-treated soilsProceedings of the Institution of Civil Engineers - Geotechnical Engineering, 2009
- Key Parameters for Strength Control of Artificially Cemented SoilsJournal of Geotechnical and Geoenvironmental Engineering, 2007
- Assessment of strength development in cement-admixed high water content clays with Abrams' law as a basisGéotechnique, 2003