Research on the Chamber Pressure Test Method of Small Caliber Weapons Based on a Double-Layer and Double-Grid Structure Strain Tester
- 8 June 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 21 (17) , 18554-18561
Abstract
Chamber pressure test remains to be a difficult problem in the field of internal ballistics. Therefore, a new chamber pressure test method based on a double-layer and double-grid structure strain tester was proposed to test the chamber pressure for the small caliber weapons. The method has a simple design structure compared with the traditional chamber pressure test method. This method can also obtain the entire pressure test curve without destroying the barrel structure. Furthermore, the novel method has a high test accuracy with low cost, high reliability with long life, and good electromagnetic compatibility (EMC). The core idea was to test the strain on the outer wall of the barrel through the double-layer and double-grid strain tester, thereby calculating the chamber pressure according to thick-walled cylinder theory. First, the mechanism of this new test method was analyzed, and the fourth-order Runge–Kutta algorithm was used to establish a simulation model of the chamber pressure. Second, the sensitivity of the strain tester was obtained by calibrating the strain test system. The test method was compared with the lead wire electronic manometer test and the simulation modeling methods. The test curve was consistent with the lead wire electronic manometer test and the simulation curves, verifying the test accuracy and feasibility of the method. Finally, the simulations and experiments validated that the new test method had good EMC.Keywords
Funding Information
- National Natural Science Foundation of China (61471385)
- Study Abroad Fund of China (2017-092)
- Fund for Shanxi “1331 Project” Key Innovative Research Team
This publication has 30 references indexed in Scilit:
- Determination of Pressure Profile During Closed-Vessel Test Through Computational Fluid Dynamics SimulationJournal of Thermal Science and Engineering Applications, 2015
- Operator splitting technique with FORCE scheme employed to simulate pressure wave motion inside gun chamberApplied Mathematical Modelling, 2015
- Transient Thermoelastic Analysis of a Solid Cylinder Containing a Circumferential Crack Using the C–V Heat Conduction ModelJournal of Thermal Stresses, 2014
- Determination of Pressure Profiles Behind Projectiles During Interior Ballistic CycleJournal of Applied Mechanics, 2013
- Direct particle motion and interaction modeling method applied to simulate propellant burnApplied Mathematical Modelling, 2013
- Thermal stresses in infinite circular cylinder subjected to rotationApplied Mathematics and Mechanics, 2012
- Experiments on the Combustion Characteristics of Deterrent-Coated Propellants and Their Application in Traveling Charge PropulsionCombustion Science and Technology, 2012
- Thermal Stress-Focusing Effect in a Transversely Isotropic Cylinder with Phase TransformationJournal of Thermal Stresses, 2012
- Three‐Dimensional Simulation of Pressure Fluctuation in a Granular Solid Propellant Chamber within an Ignition StagePropellants, Explosives, Pyrotechnics, 2011
- Active piston technique to optimize the chamber pressure in two-stage light-gas gunsInternational Journal of Impact Engineering, 2006