TMTiehua Ma

Tiehua Ma

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Tiehua Ma has a total of 39 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    High-Sensitivity Dynamic Detection of Dissolved Acetylene in Transformer Oil Based on High-Power Quartz-Enhanced Photoacoustic Spectroscopy Sensing System

    by Yuxiang Wu, Tiehua Ma, Chenhua Liu, Yashan Fan, Shuai Shi, Songjie Guo, Yu Wang, Xiangjun Xu, Guqing Guo, Xuanbing Qiu, et al.

    To enable the highly sensitive detection of acetylene (C2H2) dissolved in transformer oil, a high-power quartz-enhanced photoacoustic spectroscopy (QEPAS) sensing system is proposed. A standard 32.7 kHz quartz tuning fork (QTF) was employed as an acoustic transducer, coupled with an optimized acoustic resonator to enhance the acoustic signal. The laser power was boosted to 150 mW using a C-band erbium-doped fiber amplifier (EDFA), achieving a detection limit of 469 ppb for C2H2 with an integration time of 1 s. The headspace degassing method was utilized to extract dissolved gases from the transformer oil, and the equilibrium process for the release of dissolved C2H2 was successfully monitored using the developed high-power QEPAS system. This approach provides reliable technical support for the real-time monitoring of the operational safety of power transformers.


  • Open Access

    Loading method for tractor rotary tillage load spectrum based on extreme load retention resampling

    by Wang Yu, Wang Ling, Wang Shumao, Zhao Junsheng, Zhang Yajun, Wen Changkai, Ma Tiehua

    Loading method for tractor rotary tillage load spectrum based on extreme load retention resampling


  • Open Access

    Detection of Flying Metal Bodies Based on Photoelectric Composite Sensing

    by Weitao Gao, Tiehua Ma, Changxin Chen, Chenbin Wang, Na Feng

    In order to reduce the impact of the environment on the accuracy and sensitivity of detection, and to meet the requirements of concealment from detection and being lightweight, a technology for detecting flying metal objects based on photoelectric composite sensors is proposed. The method first analyzes the target’s characteristics and detection environment, and then compares and analyzes the methods for detecting typical flying metal objects. On the basis of the traditional eddy current model, the photoelectric composite detection model that meets the requirements of detecting flying metal objects was studied and designed. For the problems of the short detection distance and the long response time of the traditional eddy current model, the performance of the eddy current sensor was improved to meet the requirements of detection through optimizing the detection circuit and coil parameter model. Meanwhile, to meet the goal of being lightweight, an infrared detection array model applicable to flying metal bodies was designed, and simulation experiments of composite detection based on the model were conducted. The results show that the flying metal body detection model based on photoelectric composite sensors met the requirements of distance and response time for detecting flying metal bodies and may provide an avenue for exploring the composite detection of flying metal bodies.


  • Open Access

    Design and Simulation of Multichannel Dynamic Measurement Control System

    by Dawei Shen, Dongxing Pei, Tiehua Ma

    The circuit system designed in this paper uses FPGA and single-chip microcomputer as the main chips. It uses VHDL language programming and performs functional simulation and verification of the core control program through ModelSim software, and finally, a storage-type dynamic measurement and control system with one-to-multiple channels, adjustable trigger modes, and optional sampling frequency is realized. At the same time, the system is further optimized in terms of power consumption and volume. The storage measurement and control system can successfully record eight-channel dynamic voltage signals, and the relative error of the experimental results is less than 2 through the simulation trigger experiment and Hopkinson bar experiment loading.

  • Open Access

    Mathematical Control of Space-Based Kinetic Energy Weapons Based on Partial Differential Equations and Evaluation of Their Destructive Effects

    by Zhixin Lian, Tiehua Ma

    This paper presents an in-depth study and analysis of the mathematical control of space-based kinetic energy weapons and the evaluation of the damaging effect by partial differential equations. The spectral element discrete format of the optimal control problem is constructed, the a priori error estimate of the control problem solution is proved theoretically, the posteriori error estimator is constructed, and the adaptive solution algorithm is designed. The posteriori error estimator is used as the encryption criterion to guide the local encryption of the grid so that the distribution of the dissection nodes is denser where the function regularity is poor. In the case of a compartment subjected to a shell attack, the effect of different factors on the structural damage of a single compartment under two explosions is investigated by varying the explosive mass, the location of the blast point, and the interval between the two explosions. In this paper, the problem of implosion in the cabin is studied, and the main factors affecting the response of the implosion structure are analyzed using dimensionality. The data of various simulation conditions are counted, and the dimensionless damage number is fitted with the deformation results of the bulkhead under each damage mode. It is still difficult to obtain the acceleration information of the target. Experimental studies were conducted on the composite honeycomb sandwich structure penetrated by fragmentation at different velocities and angles, and the accuracy of the theoretical model and the fragmentation residual formula was verified based on the test results. The analysis found that the antidamage performance of the composite honeycomb sandwich structure is better than the existing honeycomb sandwich body structure, and the energy absorption per unit volume of the structure is 27.2%–84.2% higher than that of the existing structure in the range of different penetration velocities. The average error between the theoretical calculation results and experimental results of the remaining velocity of the broken piece is within 6%, the error with the numerical simulation is about 8%, and the composite honeycomb sandwich structure with the best energy absorption characteristics and structural parameters is obtained.


  • Open Access

    Simulation and Study of DC Corona Discharge Characteristics of Bar-Plate Gap

    by Na Feng, Tiehua Ma, Changxin Chen, Boren Yao, Weitao Gao

    In this paper, the corona discharge process of the bar-plate gap at −1 kV DC voltage is simulated using a two-dimensional axisymmetric plasma module. We analyze the variation of air negative corona discharge current, and the distribution morphology of microparticles in different discharge stages in detail. The significance of plasma chemical reactions at some typical time and the distribution characteristics of heavy particles are investigated according to reaction rates. Results show that, in the current rising stage, the collision ionization reactions (e.g., R1 and R2) and electron adsorption reaction (e.g., R3) play a major role, which lead to the increase in charged particles and the formation of an electron avalanche. In the current drop stage, all reaction rates decreased, except for collision ionization and electron attachment, partial charge transfer reactions (e.g., R8, R10, R11, and R14), and composite reactions (e.g., R16, R17, and R18), which come into play and gradually reduce the number of charged ions in the gap. In the current stabilizing stage, the main chemical reactions are composite reactions (e.g., R16 and R17), then the corona discharge ends. For the heavy particle distribution, O2+ and O4+ are the main positive ions, O2− is the most abundant negative ions, and the neutral particles are mainly O.


  • Open Access

    Structure Strength Dynamic Strain Measurement Acquisition System Based on Data Fusion

    by Dawei Shen, Dongxing Pei, Tiehua Ma

    Strain measurement technology plays an irreplaceable role in measuring the force change characteristics of mechanical components and monitoring important engineering structures. In structural health monitoring, dynamic stress and strain testing is the main way to determine its overall fatigue, and excessive stress will seriously affect the strength of the structure, causing the structure to deform or even break, which will affect the reliability of the experiment and the use of workpieces, so it is of great significance to carry out dynamic stress and strain tests on the structure. Resistance strain measurement technology is widely used in the civil engineering industry, but the principles of modern physics technology are unknown to many practitioners. Data fusion technology or information fusion technology is also called multisensor fusion technology. Using computer technology to automatically analyze and integrate the data processing process of the detection data from multiple sensors according to time sequence and certain criteria, it can complete the required decision-making and judgment.

  • Research on the Chamber Pressure Test Method of Small Caliber Weapons Based on a Double-Layer and Double-Grid Structure Strain Tester

    by Yu Wang, Tiehua Ma, Dongxing Pei, Changxin Chen

    Chamber pressure test remains to be a difficult problem in the field of internal ballistics. Therefore, a new chamber pressure test method based on a double-layer and double-grid structure strain tester was proposed to test the chamber pressure for the small caliber weapons. The method has a simple design structure compared with the traditional chamber pressure test method. This method can also obtain the entire pressure test curve without destroying the barrel structure. Furthermore, the novel method has a high test accuracy with low cost, high reliability with long life, and good electromagnetic compatibility (EMC). The core idea was to test the strain on the outer wall of the barrel through the double-layer and double-grid strain tester, thereby calculating the chamber pressure according to thick-walled cylinder theory. First, the mechanism of this new test method was analyzed, and the fourth-order Runge–Kutta algorithm was used to establish a simulation model of the chamber pressure. Second, the sensitivity of the strain tester was obtained by calibrating the strain test system. The test method was compared with the lead wire electronic manometer test and the simulation modeling methods. The test curve was consistent with the lead wire electronic manometer test and the simulation curves, verifying the test accuracy and feasibility of the method. Finally, the simulations and experiments validated that the new test method had good EMC.


  • Open Access

    Experimental Study Comparing the Effectiveness of Physical Isolation and ANN Digital Compensation Methodologies at Eliminating the Stress Wave Effect Error on Piezoelectric Pressure Sensor

    by Lei Feng, Tiehua Ma

    Stress wave, accompanied by explosion shock wave overpressure measurement and dynamic pressure calibration on shock tube, could cause error signals in the piezoelectric pressure sensor (PPS) used for measuring and calibrating. We may call this error the stress wave effect (SWE). In this paper, the SWE and its isolation from PPS were studied by using a split Hopkinson pressure bar (SHPB). In the experimental study of SWE, when increasing the input stress, the corresponding output signal of the PPS was analyzed, and the existence of SWE was verified using the result of the spectrum analysis of the output signal. The stress wave isolation pedestal used in the stress wave isolation experiment was made of nylon and plexiglass polymer materials. The effects of the isolation pedestal’s materials and length on the stress wave isolation were analyzed using the study results. Finally, an artificial neural network (ANN) was trained with the data of the SWE study and was further applied to compensate the SWE error of the PPS output signal. The compensating results were compared with the isolating results, and the advantages and disadvantages of the digital compensation and physical isolation methods were analyzed.