Friction losses of cemented unclassified iron tailings slurry based on full-scale pipe-loop test
Open Access
- 1 January 2019
- conference paper
- Published by Australian Centre for Geomechanics
- p. 571-578
Abstract
Friction losses is a key parameter in the design of pipeline transportation in paste backfill. A full-scale pipeloop test was conducted in the JCHX Paste Backfilling laboratory to investigate the friction losses of cemented unclassified iron tailings slurry. Friction losses in upward sloping pipe, vertical downward pipe, vertical upward pipe, 90° long radius elbow, horizontal straight pipe and downward sloping pipe were tested simultaneously under different solid fractions. The results indicated that friction losses always increase with flow rate and solid fraction. Friction losses in the elbows are about 1.55–2.16 times that in the horizontal straight pipe, which is about 2.7–10.0 kPa·m-1. The pipe-loop test data can be used to analyse the rheological priorities of cemented unclassified tailings slurry. Based on the Buckingham rheological equation, an empirical formula for friction losses was established and applied to a pipe with the optimal diameter of DN 150 mm. It can be concluded that the full-scale pipe-loop test is an effective way to investigate friction losses and the economics of design pipeline transportation.Keywords
This publication has 6 references indexed in Scilit:
- Experimental investigations and CFD modeling for flow of highly concentrated iron ore slurry through horizontal pipelineParticulate Science and Technology, 2017
- Paste-like cemented backfilling technology and rheological characteristics analysis based on jigging sandsJournal of Central South University, 2017
- Pressure drop in loop pipe flow of fresh cemented coal gangue–fly ash slurry: Experiment and simulationAdvanced Powder Technology, 2015
- CFD modeling for pipeline flow of fine particles at high concentrationInternational Journal of Multiphase Flow, 2012
- Pipeline transport of high density slurries: a historical review of past mistakes, lessons learned and current technologiesMining Technology: Transactions of the Institutions of Mining and Metallurgy, 2012
- Pipe flow of homogeneous slurry