Fuel Spray Behavior in a Small DI Diesel Engine: Effect of Combustion Chamber Geometry
Authors:
- 6 March 2000
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
Reductions in fuel consumption and pollutant emissions from direct injection diesel engines are important issues in engine research. To achieve these reductions, rapid and better fuel air mixing is the most important requirement. The mixing quality of diesel spray with air is generally improved by selecting the best injection parameters and improving the characteristics of air movement in the combustion chamber. The shape of the combustion chamber can also help to form better mixtures. In this study, improvement in mixture formation was attempted by changing the combustion chamber geometry. The fuel spray development was visualized from two directions in an actual engine with a transparent cylinder and piston arrangement. The place where spray impinges, the distance from impinging wall to nozzle tip, and the shape of the chamber entrance and bottom were varied to determine their effects on the fuel spray development in the combustion chamber. It was found that a re-entrant type combustion chamber with round lip and round bottom corners provides better air and fuel distribution than a simple cylindrical combustion chamber. From the results modifications of the available empirical equations for calculating the spray path length and the area where spray spreads were attempted.Keywords
This publication has 13 references indexed in Scilit:
- Quantitative Analysis of Fuel Vapor Concentration in Diesel Spray by Exciplex Fluorescence MethodSAE International Journal of Advances and Current Practices in Mobility, 1997
- Effect of Ambient Gas Properties for Characteristics of Non-Reacting Diesel Fuel SpraySAE International Journal of Advances and Current Practices in Mobility, 1997
- Movement and Structure of Diesel Spray Impinging on an Inclined WallSAE International Journal of Advances and Current Practices in Mobility, 1997
- In Cylinder High Speed and Stroboscopic Video Observation of Spray Development in a DI Diesel EngineSAE International Journal of Advances and Current Practices in Mobility, 1996
- Visualization and Modeling of Pilot Injection and Combustion in Diesel EnginesSAE International Journal of Advances and Current Practices in Mobility, 1996
- Effects of Injection Pressure and Nozzle Geometry on Spray SMD and D.I. EmissionsSAE International Journal of Advances and Current Practices in Mobility, 1995
- Analysis of Fuel Spray Characteristics and Combustion Phenomena under High Pressure Fuel InjectionSAE International Journal of Advances and Current Practices in Mobility, 1990
- Optimizing Spray Behavior to Improve Engine Performance and to Reduce Exhaust Emissions in a Small D.I. Diesel EngineSAE International Journal of Advances and Current Practices in Mobility, 1989
- Behavior of diesel spray impinging on a wall.TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B, 1988
- Behavior of Adhering Fuel on Cold Combustion Chamber Wall in Direct Injection Diesel EnginesSAE International Journal of Advances and Current Practices in Mobility, 1986