3-D-Printed Shaped and Material-Optimized Lenses for Next-Generation Spaceborne Wind Scatterometer Weather Radars
- 29 December 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 70 (5) , 3163-3172
Abstract
Current spaceborne wind scatterometers have shown failure due to mechanical wear from moving parts used to conically scan a directive beam. In order to eliminate the risk of mechanical rotation failure, an antenna design with no moving parts that achieve the conical beam sweep is desirable. In this article, a lightweight, 3-D-printed, inhomogeneous lens antenna is presented as an all-electronic alternative. Compared to the previous on-axis fed lenses, the real-life application requiring conical scanning necessitates significant developments regarding the synthesis, optimization, and prototyping of the off-axis fed lens. The lens antenna is designed using curved-ray geometrical optics coupled to particle swarm optimization to determine the optimum lens surface shapes and material inhomogeneity while obtaining a design with minimum volume and therefore mass. An 18 cm lens is designed using this approach. Instructions on how to 3-D-print the inhomogeneous lens are given using a unit cell design, which permits additive manufacturing using fused deposition modeling (FDM) techniques. The lens is measured for far-field pattern performance at various locations along with the ring-shaped focus of the azimuthally symmetric lens. The measurements agree well with predictions obtained by full-wave simulations. These all-electronic alternatives are expected to prolong the lifetime of future spaceborne wind scatterometers.Keywords
Funding Information
- Alexander S. Onassis Public Benefit Foundation (F ZP 042-1/2019- 2020)
- NASA FINESST (80NSSC19K1347)
This publication has 34 references indexed in Scilit:
- Melting trends over the Greenland ice sheet (1958–2009) from spaceborne microwave data and regional climate modelsThe Cryosphere, 2011
- Wind energy resources in the Ionian SeaRenewable Energy, 2010
- Ten Years of SeaWinds on QuikSCAT for Snow ApplicationsRemote Sensing, 2010
- Operational Use and Impact of Satellite Remotely Sensed Ocean Surface Vector Winds in the Marine Warning and Forecasting EnvironmentOceanography, 2009
- The Impact of Variational Assimilation of SSM/I and QuikSCAT Satellite Observations on the Numerical Simulation of Indian Ocean Tropical CyclonesWeather and Forecasting, 2008
- On the Use of QuikSCAT Scatterometer Measurements of Surface Winds for Marine Weather PredictionMonthly Weather Review, 2006
- Particle swarm optimization in electromagneticsIEEE Transactions on Antennas and Propagation, 2004
- Nonuniform Luneburg and two-shell lens antennas: radiation characteristics and design optimizationIEEE Transactions on Antennas and Propagation, 2001
- Spaceborne radar measurement of wind velocity over the ocean-an overview of the NSCAT scatterometer systemProceedings of the IEEE, 1991
- Identifiability in wind estimation from scatterometer measurementsIEEE Transactions on Geoscience and Remote Sensing, 1991