Donald Ruffatto
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Donald Ruffatto has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Michael Thomas Tolley
Department of Mechanical and Aerospace Engineering, University of California San Diego, La Jolla, CA 92093, USA
3 shared publications - Paul E. Glick
Department of Mechanical and Aerospace Engineering, University of California, San Diego, San Diego, CA, United States
3 shared publications - Dylan Drotman
Mechanical Engineering, University of California, San Diego, San Diego, California United States of America 92122
2 shared publications - Jordan Budhu
Virginia Tech
2 shared publications - Richard E. Hodges
Jet Propulsion Laboratory (JPL), California Institute of Technology, Pasadena, CA, USA
2 shared publications - Yahya Rahmat-Samii
University of California, Los Angeles, Los Angeles, CA, USA
2 shared publications
Latest Publications
- Open Access
- 24 March 2022
- Published by Frontiers Media SA in Frontiers in Robotics and AI
- Vol. 9, 838913
Branching Vine Robots for Unmapped Environments
While exploring complex unmapped spaces is a persistent challenge for robots, plants are able to reliably accomplish this task. In this work we develop branching robots that deploy through an eversion process that mimics key features of plant growth (i.e., apical extension, branching). We show that by optimizing the design of these robots, we can successfully traverse complex terrain even in unseen instances of an environment. By simulating robot growth through a set of known training maps and evaluating performance with a reward heuristic specific to the intended application (i.e., exploration, anchoring), we optimized robot designs with a particle swarm algorithm. We show these optimization efforts transfer from training on known maps to performance on unseen maps in the same type of environment, and that the resulting designs are specialized to the environment used in training. Furthermore, we fabricated several optimized branching everting robot designs and demonstrated key aspects of their performance in hardware. Our branching designs replicated three properties found in nature: anchoring, coverage, and reachability. The branching designs were able to reach 25% more of a given space than non-branching robots, improved anchoring forces by 12.55×, and were able to hold greater than 100× their own mass (i.e., a device weighing 5 g held 575 g). We also demonstrated anchoring with a robot that held a load of over 66.7 N at an internal pressure of 50 kPa. These results show the promise of using branching vine robots for traversing complex and unmapped terrain.
- 24 March 2022
- Published by Frontiers Media SA in Frontiers in Robotics and AI
- Vol. 9, 838913
Open AccessBranching Vine Robots for Unmapped Environments
While exploring complex unmapped spaces is a persistent challenge for robots, plants are able to reliably accomplish this task. In this work we develop branching robots that deploy through an eversion process that mimics key features of plant growth (i.e., apical extension, branching). We show that by optimizing the design of these robots, we can successfully traverse complex terrain even in unseen instances of an environment. By simulating robot growth through a set of known training maps and evaluating performance with a reward heuristic specific to the intended application (i.e., exploration, anchoring), we optimized robot designs with a particle swarm algorithm. We show these optimization efforts transfer from training on known maps to performance on unseen maps in the same type of environment, and that the resulting designs are specialized to the environment used in training. Furthermore, we fabricated several optimized branching everting robot designs and demonstrated key aspects of their performance in hardware. Our branching designs replicated three properties found in nature: anchoring, coverage, and reachability. The branching designs were able to reach 25% more of a given space than non-branching robots, improved anchoring forces by 12.55×, and were able to hold greater than 100× their own mass (i.e., a device weighing 5 g held 575 g). We also demonstrated anchoring with a robot that held a load of over 66.7 N at an internal pressure of 50 kPa. These results show the promise of using branching vine robots for traversing complex and unmapped terrain.
- 29 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 70 (5) , 3163-3172
3-D-Printed Shaped and Material-Optimized Lenses for Next-Generation Spaceborne Wind Scatterometer Weather Radars
Current spaceborne wind scatterometers have shown failure due to mechanical wear from moving parts used to conically scan a directive beam. In order to eliminate the risk of mechanical rotation failure, an antenna design with no moving parts that achieve the conical beam sweep is desirable. In this article, a lightweight, 3-D-printed, inhomogeneous lens antenna is presented as an all-electronic alternative. Compared to the previous on-axis fed lenses, the real-life application requiring conical scanning necessitates significant developments regarding the synthesis, optimization, and prototyping of the off-axis fed lens. The lens antenna is designed using curved-ray geometrical optics coupled to particle swarm optimization to determine the optimum lens surface shapes and material inhomogeneity while obtaining a design with minimum volume and therefore mass. An 18 cm lens is designed using this approach. Instructions on how to 3-D-print the inhomogeneous lens are given using a unit cell design, which permits additive manufacturing using fused deposition modeling (FDM) techniques. The lens is measured for far-field pattern performance at various locations along with the ring-shaped focus of the azimuthally symmetric lens. The measurements agree well with predictions obtained by full-wave simulations. These all-electronic alternatives are expected to prolong the lifetime of future spaceborne wind scatterometers.
- 29 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 70 (5) , 3163-3172
3-D-Printed Shaped and Material-Optimized Lenses for Next-Generation Spaceborne Wind Scatterometer Weather Radars
Current spaceborne wind scatterometers have shown failure due to mechanical wear from moving parts used to conically scan a directive beam. In order to eliminate the risk of mechanical rotation failure, an antenna design with no moving parts that achieve the conical beam sweep is desirable. In this article, a lightweight, 3-D-printed, inhomogeneous lens antenna is presented as an all-electronic alternative. Compared to the previous on-axis fed lenses, the real-life application requiring conical scanning necessitates significant developments regarding the synthesis, optimization, and prototyping of the off-axis fed lens. The lens antenna is designed using curved-ray geometrical optics coupled to particle swarm optimization to determine the optimum lens surface shapes and material inhomogeneity while obtaining a design with minimum volume and therefore mass. An 18 cm lens is designed using this approach. Instructions on how to 3-D-print the inhomogeneous lens are given using a unit cell design, which permits additive manufacturing using fused deposition modeling (FDM) techniques. The lens is measured for far-field pattern performance at various locations along with the ring-shaped focus of the azimuthally symmetric lens. The measurements agree well with predictions obtained by full-wave simulations. These all-electronic alternatives are expected to prolong the lifetime of future spaceborne wind scatterometers.
- 19 March 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 5 (3) , 3761-3767
High Strength Inflatable Pouch Anchors
Anchoring is an important capability for mobile robots, either to conserve power, survey an area, or deploy a payload. However, the careful placement of an anchor in unstructured environments requires a great deal of dexterity, perception, and planning. Furthermore, many of the reversible adhesives that may be used for anchoring are surface-dependent. We introduce inflatable pouch anchors as a versatile, low-power, and easy-to-position technology for anchoring in natural surfaces. By using negative space such as gaps and cracks with a flexible pouch, the challenge of placing an anchor is greatly simplified. We used a compressed ${\rm{CO_{2}}$ canister to supply pressure, and a three-way normally-closed valve to allow for multiple uses. We tested the anchor with high friction interfaces such as microspines and gecko-inspired adhesives. We validated the performance with tests on smooth surfaces, sandpaper, manufactured rock, and natural rock surfaces. The 425 g anchor actuated at an internal pressure of 105 kPa held over 700 N when anchored in natural rock with a microspine interface.- 19 March 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 5 (3) , 3761-3767
High Strength Inflatable Pouch Anchors
Anchoring is an important capability for mobile robots, either to conserve power, survey an area, or deploy a payload. However, the careful placement of an anchor in unstructured environments requires a great deal of dexterity, perception, and planning. Furthermore, many of the reversible adhesives that may be used for anchoring are surface-dependent. We introduce inflatable pouch anchors as a versatile, low-power, and easy-to-position technology for anchoring in natural surfaces. By using negative space such as gaps and cracks with a flexible pouch, the challenge of placing an anchor is greatly simplified. We used a compressed ${\rm{CO_{2}}$ canister to supply pressure, and a three-way normally-closed valve to allow for multiple uses. We tested the anchor with high friction interfaces such as microspines and gecko-inspired adhesives. We validated the performance with tests on smooth surfaces, sandpaper, manufactured rock, and natural rock surfaces. The 425 g anchor actuated at an internal pressure of 105 kPa held over 700 N when anchored in natural rock with a microspine interface.- 16 July 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 3 (4) , 4201-4208
Long-Duration Surface Anchoring With a Hybrid Electrostatic and Gecko-Inspired Adhesive
Many scenarios require access to locations that are difficult to reach; however, mobile and untethered robots for these applications operate on a limited reserve of energy. Researchers often design robots specifically to be able to wait for periods of time in low-power states, conserving energy and protecting hardware during periods of inactivity. In this work, we introduce a temporary anchor using a low-power hybrid electrostatic/gecko-inspired adhesive for robots such as quadrotors and wall-climbing systems to allow access to remote areas while providing the ability to safely hold a position for an extended duration. This work presents a self-contained electrostatic and gecko-inspired adhesive anchor mechanism which is particularly well suited for long duration payload placement. With structural layers comprised of a rigid plate and a soft foam, this anchor distributes normal stress across the pad while maintaining the compliance required for effective use of the adhesives. This new approach to loading the hybrid adhesive increases the distance off-the-wall that a payload can be supported, even on rough surfaces. We model the capacity of the device and demonstrate carrying an 11.9 N load applied 12 mm off of a rough drywall surface with an adhesive area of 3.2 cm2. We also offer two innovations that extend the mission-duration of an electrostatic adhesive anchor. We show that polyimide, a common dielectric layer in flex circuits, is prone to failing over a period of hours of ON time. Both polyethylene-terephthalate (PET) and polyethylene-napthalate (PEN) demonstrate long-term stability under the applied electrical field. Furthermore, to reduce the power consumption of the adhesive we introduce the concept of power-cycling. It is shown to reduce power consum
- 16 July 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 3 (4) , 4201-4208
Long-Duration Surface Anchoring With a Hybrid Electrostatic and Gecko-Inspired Adhesive
Many scenarios require access to locations that are difficult to reach; however, mobile and untethered robots for these applications operate on a limited reserve of energy. Researchers often design robots specifically to be able to wait for periods of time in low-power states, conserving energy and protecting hardware during periods of inactivity. In this work, we introduce a temporary anchor using a low-power hybrid electrostatic/gecko-inspired adhesive for robots such as quadrotors and wall-climbing systems to allow access to remote areas while providing the ability to safely hold a position for an extended duration. This work presents a self-contained electrostatic and gecko-inspired adhesive anchor mechanism which is particularly well suited for long duration payload placement. With structural layers comprised of a rigid plate and a soft foam, this anchor distributes normal stress across the pad while maintaining the compliance required for effective use of the adhesives. This new approach to loading the hybrid adhesive increases the distance off-the-wall that a payload can be supported, even on rough surfaces. We model the capacity of the device and demonstrate carrying an 11.9 N load applied 12 mm off of a rough drywall surface with an adhesive area of 3.2 cm2. We also offer two innovations that extend the mission-duration of an electrostatic adhesive anchor. We show that polyimide, a common dielectric layer in flex circuits, is prone to failing over a period of hours of ON time. Both polyethylene-terephthalate (PET) and polyethylene-napthalate (PEN) demonstrate long-term stability under the applied electrical field. Furthermore, to reduce the power consumption of the adhesive we introduce the concept of power-cycling. It is shown to reduce power consum
- 18 June 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 17 (11) , 2080-2084
Three-Dimensionally Printed, Shaped, Engineered Material Inhomogeneous Lens Antennas for Next-Generation Spaceborne Weather Radar Systems
In this paper, 3D-printed shaped inhomogeneous dielectric lens antennas are synthesized using a novel approach based on Geometrical Optics (GO) and the Particle Swarm Optimization (PSO) method. The GO method is used to trace rays to the aperture following the amplitude, phase, and polarization along curved space trajectories through inhomogeneous media to evaluate potential designs. These designs are specified by power series polynomials describing the surface topology and permittivity functions filling the volume of the shaped lens. The optimum design is obtained by integrating the GO analysis engine with the PSO into an optimization loop. The complex designed materials that results can be printed using new 3D printers. New techniques are developed to print structures using Fused Deposition Modeling (FDM) which contain complex overhanging features. Measured and simulated results are provided for all 3D printed synthesized inhomogeneous lenses
- 18 June 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 17 (11) , 2080-2084
Three-Dimensionally Printed, Shaped, Engineered Material Inhomogeneous Lens Antennas for Next-Generation Spaceborne Weather Radar Systems
In this paper, 3D-printed shaped inhomogeneous dielectric lens antennas are synthesized using a novel approach based on Geometrical Optics (GO) and the Particle Swarm Optimization (PSO) method. The GO method is used to trace rays to the aperture following the amplitude, phase, and polarization along curved space trajectories through inhomogeneous media to evaluate potential designs. These designs are specified by power series polynomials describing the surface topology and permittivity functions filling the volume of the shaped lens. The optimum design is obtained by integrating the GO analysis engine with the PSO into an optimization loop. The complex designed materials that results can be printed using new 3D printers. New techniques are developed to print structures using Fused Deposition Modeling (FDM) which contain complex overhanging features. Measured and simulated results are provided for all 3D printed synthesized inhomogeneous lenses
- 21 August 2001
- Published by SPIE-Intl Soc Optical Eng
- p. 10-18
Stabilized high-accuracy optical tracking system (SHOTS)
This paper describes an 0.75 meter aperture, Stabilized High-accuracy Optical Tracking System (SHOTS), two of which are being developed by Textron Systems Corporation, under contract to the Navy's Space and Naval Warfare Systems Center, San Diego (SPAWAR-SD). The SHOTS design is optimized to meet the requirements of the Navy's Theater Ballistic Missile Defense (TBMD) testing program being conducted at the Kauai Pacific Missile Range Facility (PMRF). The SHOTS utilizes a high-precision, GPS aided inertial navigation unit (INU) coupled with a 3-axis, rate gyro stabilized mount which allows precision pointing to be achieved on either land or sea-based platforms. The SHOTS mount control system architecture, acquisition, tracking and pointing (ATP) functionality and methodology which allows the system to meet the TBMD mission data collection requirements are discussed. High frame rate visible and MWIR sensors are incorporated into the system design to provide the capability of capturing short duration events, e.g., missile-target intercepts. These sensors along with the supporting high speed data acquisition, recording and control subsystems are described. Simulations of the SHOTS imaging performance in TBMD measurement scenarios are presented along with an example of the image improvement being achieved with post-processing image reconstruction algorithms.
- 21 August 2001
- Published by SPIE-Intl Soc Optical Eng
- p. 10-18
Stabilized high-accuracy optical tracking system (SHOTS)
This paper describes an 0.75 meter aperture, Stabilized High-accuracy Optical Tracking System (SHOTS), two of which are being developed by Textron Systems Corporation, under contract to the Navy's Space and Naval Warfare Systems Center, San Diego (SPAWAR-SD). The SHOTS design is optimized to meet the requirements of the Navy's Theater Ballistic Missile Defense (TBMD) testing program being conducted at the Kauai Pacific Missile Range Facility (PMRF). The SHOTS utilizes a high-precision, GPS aided inertial navigation unit (INU) coupled with a 3-axis, rate gyro stabilized mount which allows precision pointing to be achieved on either land or sea-based platforms. The SHOTS mount control system architecture, acquisition, tracking and pointing (ATP) functionality and methodology which allows the system to meet the TBMD mission data collection requirements are discussed. High frame rate visible and MWIR sensors are incorporated into the system design to provide the capability of capturing short duration events, e.g., missile-target intercepts. These sensors along with the supporting high speed data acquisition, recording and control subsystems are described. Simulations of the SHOTS imaging performance in TBMD measurement scenarios are presented along with an example of the image improvement being achieved with post-processing image reconstruction algorithms.