Thermal Atomic Layer Deposition of Lithium Phosphorus Oxynitride as a Thin-Film Solid Electrolyte
Author:
- 17 September 2016
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 163 (13) , A2555-A2562
Abstract
In this study, thermal atomic-layer deposition (ALD) is utilized to deposit a film of lithium phosphorus oxynitride (LiPON) to improve the solid-electrolyte performance of thin-film lithium batteries, increasing their viability for high-energy-storage applications. This technique enabled the successful fabrication of a carbon-free LIPON film using a deposition sequence constructed on the basis of a phosphate backbone and film deposition temperatures of 400–500°C. The obtained film has an ionic activity of 3.2 × 10−7 S cm−1 and an activation energy of 0.57 eV, values that are largely equivalent to those of sputtered LiPON films. Characterization of the film revealed that the thermal ALD-based film deposition is highly conformal, as the LiPON film is deposited deep (several hundreds of nanometers) into the grain boundaries of the lithium cobalt dioxide and the pores in this film are several tens of nanometers in diameter. These findings suggest that the use of thermal ALD to deposit LiPON films has a wide range of potential applications in battery technologies.Keywords
This publication has 25 references indexed in Scilit:
- An interpretation for the increase of ionic conductivity by nitrogen incorporation in LiPON oxynitride glassesSolid State Ionics, 2013
- Lithium Phosphate Thin Films Grown by Atomic Layer DepositionJournal of the Electrochemical Society, 2012
- Atomic layer deposition for nanostructured Li-ion batteriesJournal of Vacuum Science & Technology A, 2011
- Characteristics and applications of plasma enhanced-atomic layer depositionThin Solid Films, 2011
- Investigation of the local structure of LiPON thin films to better understand the role of nitrogen on their performanceSolid State Ionics, 2011
- Fabrication of Three-Dimensional Battery Using Ceramic Electrolyte with Honeycomb Structure by Sol–Gel ProcessJournal of the Electrochemical Society, 2010
- High Energy Density All‐Solid‐State Batteries: A Challenging Concept Towards 3D IntegrationAdvanced Functional Materials, 2008
- Chemical stability enhancement of lithium conducting solid electrolyte plates using sputtered LiPON thin filmsJournal of Power Sources, 2004
- Ion-implantation modification of lithium–phosphorus oxynitride thin-filmsJournal of Power Sources, 2002
- Fabrication and characterization of amorphous lithium electrolyte thin films and rechargeable thin-film batteriesJournal of Power Sources, 1993