Experiments and Finite Element Simulation of Ultrasonic Assisted Drilling
Authors:
- 9 July 2018
- journal article
- research article
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 140 (10) , 101002
Abstract
In this study, ultrasonic assisted drilling (UAD) is performed to investigate the effect of ultrasonic vibrations on common difficulties existed in conventional drilling (CD). UAD is a promising and advanced technique by which a harmonic movement with high frequency and low amplitude is superimposed on the movement of work material or cutting tool. The study is conducted both experimentally and numerically; at first, a UAD system is designed, manufactured, and carried out on a milling machine and then experimental tests are accomplished. In the following, experimental results are supported by the help of three-dimensional (3D) finite element simulation. Finally, the dependent parameters such as the burr height and cylindricity of the ultrasonically and conventionally drilled workpiece are measured and compared. Briefly, it was proved that the intermittent movement of drill bit in the direction of feed rate results in broken and discontinuous chips by which built-up-edge (BUE) is reduced and hole quality is improved. In addition, the burr height, which is known as unwanted projection of material at the exit surface of pieces, can notably decrease, if UAD is considered.Keywords
This publication has 25 references indexed in Scilit:
- Built-up edge investigation in vibration drilling of Al2024-T6Ultrasonics, 2014
- Experimental investigations and finite element simulation of cutting heat in vibrational and conventional drilling of cortical boneMedical Engineering & Physics, 2014
- Investigating the effects of vibration method on ultrasonic-assisted drilling of Al/SiCp metal matrix compositesRobotics and Computer-Integrated Manufacturing, 2014
- An Experimental Investigation on the Machinability of Al2O3in Vibration-Assisted Turning Using PCD ToolMaterials and Manufacturing Processes, 2014
- Vibration Drilling of Al2024-T6Materials and Manufacturing Processes, 2013
- Experimental Investigations on Microcracks in Vibrational and Conventional Drilling of Cortical BoneJournal of Nanomaterials, 2013
- Ultrasonic-assisted drilling of Inconel 738-LCInternational Journal of Machine Tools and Manufacture, 2007
- Material behaviour in conditions similar to metal cutting: flow stress in the primary shear zoneJournal of Materials Processing Technology, 2002
- Burrless Drilling by Means of Ultrasonic VibrationCIRP Annals, 1991
- The cold upsetting and free surface ductility of some commercial steelsJournal of Applied Metalworking, 1984