An Area/Power-Efficient ΔΣ Modulator Based on Dynamic-Boost Inverter for Multichannel Sensor Applications
- 25 July 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 31 (9) , 1403-1412
Abstract
This article presents the design of an area/ power-efficient discrete-time (DT) delta-sigma ( $\Delta\Sigma $ ) modulator suitable for multichannel sensor applications. First, the area efficiency of the modulator is achieved by optimizing the size of the sampling capacitor with the compact integrators based on the dynamic-boost inverter (DBI). The DBI is designed to have a small active area of only 0.00044 mm $^{{2}}$ , due to its self-bias scheme that eliminates the need for additional hardware for biasing circuitry. Second, the power efficiency is improved through the quantitative design approach to reduce the power consumption of the integrators by optimizing the gain–bandwidth product (GBW) of the DBI-based OTA in each integrator. In addition, the static current consumption of the integrators is further reduced due to the power-saving feature of the DBI utilizing the principle of a composite transistor. Finally, the self-bias scheme ensures that the DBI maintains a dc gain of 44.3 dB despite circuit mismatch by balancing the currents of the nMOS and pMOS transistors in the DBI. The prototype modulator, fabricated using 0.18- $\mu $ m CMOS technology, occupies an active area of 0.0939 mm $^{{2}}$ . For a 25-kHz bandwidth (BW), the modulator achieves a peak signal-to-noise-and-distortion ratio (SNDR) of 84.0 dB, a peak SNR of 85.1 dB, and a DR of 87.1 dB with a power supply rejection ratio (PSRR) of 56.8 dB and a common-mode rejection ratio (CMRR) of 66.1 dB at a 1.8-V supply. The modulator also maintains an SNDR higher than 82.5 dB and a DR higher than 85.5 dB for a 5–25-kHz BW with an FoM $_{{W}}$ of 78.4–103.4 fJ/conversion at a 1.5–1.8-V supply.Keywords
Funding Information
- National Research Foundation of Korea (NRF) through the Korea Government [Ministry of Science and ICT (MSIT)] (RS-2022-00166342)
- Korea Evaluation Institute of Industrial Technology (KEIT) through the Korea Government [Ministry of Trade, Industry and Energy (MOTIE)] (RS2022-00144290)
This publication has 23 references indexed in Scilit:
- A 0.4-to-1 V Voltage Scalable $\Delta \Sigma $ ADC With Two-Step Hybrid Integrator for IoT Sensor Applications in 65-nm LP CMOSIEEE Transactions on Circuits and Systems II: Express Briefs, 2017
- A 300- $\mu\text{W}$ Audio $\Delta\Sigma$ Modulator With 100.5-dB DR Using Dynamic Bias InverterIEEE Transactions on Circuits and Systems I: Regular Papers, 2016
- Active–Passive $\Delta \Sigma $ Modulator for High-Resolution and Low-Power ApplicationsIEEE Transactions on Very Large Scale Integration (VLSI) Systems, 2016
- A Low-Power Incremental Delta–Sigma ADC for CMOS Image SensorsIEEE Transactions on Circuits and Systems II: Express Briefs, 2015
- A Reconfigurable 40-to-67 dB SNR, 50-to-6400 Hz Frame-Rate, Column-Parallel Readout IC for Capacitive Touch-Screen PanelsIEEE Journal of Solid-State Circuits, 2014
- A 0.8-V 230-$\mu$W 98-dB DR Inverter-Based $\Sigma \Delta$ Modulator for Audio ApplicationsIEEE Journal of Solid-State Circuits, 2013
- A 2.1 M Pixels, 120 Frame/s CMOS Image Sensor With Column-Parallel $\Delta \Sigma$ ADC ArchitectureIEEE Journal of Solid-State Circuits, 2010
- Switch-Matrix-Based High-Density Microelectrode Array in CMOS TechnologyIEEE Journal of Solid-State Circuits, 2010
- Low Voltage, Low Power, Inverter-Based Switched-Capacitor Delta-Sigma ModulatorIEEE Journal of Solid-State Circuits, 2009
- Active CMOS Sensor Array for Electrochemical Biomolecular DetectionIEEE Journal of Solid-State Circuits, 2008