Sintering temperature optimization for enhanced magnetic performance in La–Ca–Co doped strontium ferrite
Open Access
- 1 February 2024
- journal article
- research article
- Published by AIP Publishing in AIP Advances
- Vol. 14 (2)
Abstract
The effectiveness of employing La-Ca-Co co-doping has been demonstrated as the optimal approach for enhancing the magnetic performance of strontium ferrite. However, limited studies have explored the evolution of the magnetoplumbite phase and its correlation with the sintering temperature. In our research, La-Ca-Co doped strontium ferrite permanent magnets were fabricated using a conventional ceramic process and a two-step sintering technique. After sintering at different temperatures, all the samples possess proper c-axis orientation. When the sintering temperature was raised from 1175 °C to 1205 °C, there was an upward trend observed in the remanence Br, increasing from 430 mT to 439 mT. The coercivity Hcj exhibited an increase from 380 kA/m and reached its peak at 397 kA/m at 1185 °C. Although the Br value remained favorable, the coercivity experienced substantial deterioration, reaching its lowest point at 303 kA/m at 1205 °C. Under a sintering temperature of 1195 oC, magnetic performance with optimal energy product was achieved, with Br of 439 mT, Hcj of 379 kA/m, Hcb of 318 kA/m, and (BH)max of 35.5 kJm-3.Keywords
Funding Information
- National Key Research and Development Program of China (2022YFB3504800)
This publication has 24 references indexed in Scilit:
- Magnetic properties of Ce–Mn substituted M-type Sr-hexaferritesCeramics International, 2015
- Effect of sintering temperature on microstructure and electrical properties of Sr1−x(Na0.5Bi0.5) x Bi2Nb2O9 solid solutionsJournal of Advanced Ceramics, 2014
- Microstructure and magnetic properties of M-type Sr0.61−La0.39Ca Fe11.7Co0.3O19 hexaferrite prepared by microwave calcinationMaterials Science and Engineering: B, 2014
- Magnetic Materials and Devices for the 21st Century: Stronger, Lighter, and More Energy EfficientAdvanced Materials, 2010
- The influence of heat-treatment on microstructure and magnetic properties of rare-earth substituted SrFe12O19Journal of Alloys and Compounds, 2008
- Magnetic Properties and Composition of Ca-La-Co M-type FerritesJournal of the Japan Society of Powder and Powder Metallurgy, 2008
- Recent improvement of hard ferrite permanent magnets based on La–Co substitutionJournal of Alloys and Compounds, 2004
- Development of La-Co Substituted Ferrite MagnetsJournal of the Japan Society of Powder and Powder Metallurgy, 2003
- LaCo-substituted ferrite magnets, a new class of high-grade ceramic magnets; intrinsic and microstructural aspectsJournal of Magnetism and Magnetic Materials, 2002
- Hgh-Performance Ferrite Magnets: M-Type Sr-Ferrite Containing Lanthanum and Cobalt.Journal of the Magnetics Society of Japan, 1999