The Influence Mechanism of a Scanning Strategy on the Fatigue Life of SLM 316L Stainless Steel Forming Parts
Open Access
Abstract
The quality of SLM formed parts is one of the key factors of the promotion and application of additive manufacturing technology. The scanning strategy fundamentally affects the fatigue life of SLM 316L stainless steel parts by regulating residual stress, defect distribution, and microstructure. Three different scanning strategies (meander scanning, stripe scanning, and chessboard scanning) were adopted to prepare the specimens. High cycle fatigue loading was applied to SLM 316L stainless steel specimens prepared by different scanning strategies. The thermal conductivity characteristics during the SLM part forming process were analyzed based on scanning electron microscopy observations of microstructure of SLM specimens, and the mechanism of residual stress and internal defect generation were revealed. The scanning direction determines the growth direction of the grains, thereby affecting the anisotropy and overall fatigue performance of SLM 316L stainless steel parts. The scanning path determines the overlap and lap joint of the melt pool, directly affecting the number, size, and location of pores and incomplete fusion defects. The scanning strategy affects the distribution and magnitude of residual stresses by changing the path of heat source movement. Theoretical analysis and experimental verification results indicate that the selection of a scanning strategy is an effective method for optimizing the fatigue performance of SLM parts.Keywords
Funding Information
- National Natural Science Foundation of China (62173007)
This publication has 28 references indexed in Scilit:
- A Review on Energy Consumption and Efficiency of Selective Laser Melting Considering Support: Advances and ProspectsInternational Journal of Precision Engineering and Manufacturing-Green Technology, 2023
- A hybrid-driven remaining useful life prediction method combining asymmetric dual-channel autoencoder and nonlinear Wiener processApplied Intelligence, 2023
- Ultrasonic Lamb wave mixing based fatigue crack detection using a deep learning model and higher-order spectral analysisInternational Journal of Fatigue, 2022
- In-situ investigation on fatigue behaviors of Ti-6Al-4V manufactured by selective laser meltingInternational Journal of Fatigue, 2020
- Effect of Heat Treatment Modes on the Structure and Properties of Alloy VT6 After Selective Laser MeltingMetal Science and Heat Treatment, 2019
- Evaluation of fatigue crack propagation behaviour in Ti-6Al-4V manufactured by selective laser meltingInternational Journal of Fatigue, 2017
- Erratum to: Modeling the Microstructure Evolution During Additive Manufacturing of Ti6Al4V: A Comparison Between Electron Beam Melting and Selective Laser MeltingJOM, 2016
- On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser meltingEngineering Fracture Mechanics, 2014
- Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behaviorMaterials & Design (1980-2015), 2012
- Microstructure Effect on the Lcr Elastic Wave for Welding Residual Stress MeasurementExperimental Mechanics, 2009