Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xiaoling Yan has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The Influence Mechanism of a Scanning Strategy on the Fatigue Life of SLM 316L Stainless Steel Forming Parts

    by Huijun Ma, Xiaoling Yan, Huiwen Fu

    The quality of SLM formed parts is one of the key factors of the promotion and application of additive manufacturing technology. The scanning strategy fundamentally affects the fatigue life of SLM 316L stainless steel parts by regulating residual stress, defect distribution, and microstructure. Three different scanning strategies (meander scanning, stripe scanning, and chessboard scanning) were adopted to prepare the specimens. High cycle fatigue loading was applied to SLM 316L stainless steel specimens prepared by different scanning strategies. The thermal conductivity characteristics during the SLM part forming process were analyzed based on scanning electron microscopy observations of microstructure of SLM specimens, and the mechanism of residual stress and internal defect generation were revealed. The scanning direction determines the growth direction of the grains, thereby affecting the anisotropy and overall fatigue performance of SLM 316L stainless steel parts. The scanning path determines the overlap and lap joint of the melt pool, directly affecting the number, size, and location of pores and incomplete fusion defects. The scanning strategy affects the distribution and magnitude of residual stresses by changing the path of heat source movement. Theoretical analysis and experimental verification results indicate that the selection of a scanning strategy is an effective method for optimizing the fatigue performance of SLM parts.


  • Open Access

    Opportunities and Challenges for Predicting the Service Status of SLM Metal Parts Under Big Data and Artificial Intelligence

    by Xiaoling Yan, Huiwen Fu

    Selective laser melting (SLM) technology is a high-end dual-use technology that is implemented in aerospace and medical equipment, as well as the automotive industry and other military and civilian industries, and is urgently needed for major equipment manufacturing and national defense industries. This paper examines the challenges of uncontrollable service states and the inability to ensure service safety of SLM metal parts under nonlinear and complex operating conditions. An overview of the prediction of the service status of SLM metal parts was introduced, and an effective approach solving the problem was provided in this paper. In this approach, the cross-scale coupling mechanism between mesoscopic damage evolution and macroscopic service state evolution is clarified by tracking the mesoscopic damage evolution process of SLM metal parts based on ultrasonic nonlinear responses. The failure mechanism is organically integrated with hidden information from monitoring big data, and a “chimeric” model to accurately evaluate the service status of SLM metal parts is constructed. Combining nonlinear ultrasound technology with big data and artificial intelligence to construct a “chimeric” model and consummate the corresponding methods and theories for evaluating the service status of SLM metal parts is an effective way to reveal the mesoscopic damage evolution and service status evolution mechanisms of SLM metal parts under complex factor coupling, and to accurately describe and characterize the service status of parts under complex operating conditions. The proposed approach will provide a theoretical basis and technical guarantee for the precise management of SLM parts’ service safety in key equipment fields such as aerospace, medical equipment, and the automotive industry.

  • Open Access

    A Novel Method for Early Fatigue Damage Diagnosis in 316L Stainless Steel Formed by Selective Laser Melting Technology

    by Xiaoling Yan, Xiujian Tang

    Early fatigue damage is an important factor affecting the service safety of 316L stainless steel parts formed by selective laser melting (SLM) technology. Nonlinear ultrasonic testing for early fatigue damage in SLM 316L stainless steel specimens was carried out. A new method for evaluation of early fatigue damage based on nonlinear ultrasonic testing was proposed. Empirical mode decomposition (EMD) was applied to the unsteady ultrasonic testing signal, and the signal was decomposed into multiple intrinsic mode functions (IMFs) that meet certain conditions; then, the specific IMF (ESI) containing the effective fatigue damage information was extracted. Lastly, fast Fourier transform (FFT) was applied to the specific IMF signal to obtain the required information to evaluate the damage in the measured part caused by fatigue. The results of nonlinear ultrasonic testing agreed well with transmission electron microscope experimental analysis and theoretical model of acoustic nonlinearity caused by dislocations. The change in nonlinear ultrasonic testing results reflected the generation and evolution of dislocation structure during the low-cycle fatigue regime of the SLM 316L stainless steel specimen and revealed the early fatigue damage mechanism of this metal part. Compared with the classical FFT method, the EMD-ESI-FFT method is more sensitive in identifying the early damage in SLM 316L stainless parts induced by fatigue loading, which is equivalent to improving the early fatigue damage identification and diagnosis ability and can better ensure the service safety of important metal parts.


  • Open Access

    Research Progress in Nonlinear Ultrasonic Testing for Early Damage in Metal Materials

    by Xiaoling Yan, Houpu Wang, Xiaozhi Fan

    There are some limitations when conventional ultrasonic testing methods are used for testing early damage in metal parts. With the continuous development of acoustics and materials science, nonlinear ultrasonic nondestructive testing technology has been used for testing of early damage in metal materials. In order to better understand the basic theory and research progress of the nonlinear ultrasonic testing technology, the classical nonlinear ultrasonic theoretical models, including the dislocation monopole model, dislocation dipole model, precipitate-dislocation pinning model, and contact nonlinear ultrasonic theory-microcrack model, are analyzed in depth. This paper introduces the application and research progress of nonlinear ultrasonic detection technology, which is derived from different acoustic nonlinear effects, such as higher harmonic, wave mixing and modulation, sub-harmonic, resonance frequency spectrum analysis, and non-linear ultrasonic phased array imaging. The key technologies and problems are summarized to provide a reference for the further development and promotion of nonlinear ultrasonic non-destructive testing technology.


  • Open Access

    The Characterization of Fatigue Damage of 316L Stainless Steel Parts Formed by Selective Laser Melting with Harmonic Generation Technique

    by Rui Qiao, Xiaoling Yan

    Fatigue damage is the main reason for the failure of parts formed by selective laser melting (SLM) technology. This paper presents a high-order, harmonic, and nonlinear ultrasonic testing system for monitoring the generation and evolution of fatigue damage in SLM 316L stainless steel parts. The results demonstrate that the normalized ultrasonic, nonlinear coefficients show a significant dependence on the degree of fatigue damage of the tested specimen and that the normalized, ultrasonic, and nonlinear coefficients are effective in characterizing the degree of fatigue damage in SLM 316L stainless steel parts. Transmission electron microscope (TEM) and scanning electron microscope (SEM) analyses show that the variation in the normalized, ultrasonic, nonlinear coefficients reflect the generation and evolution process of dislocation and crack in the fatigue process of SLM 316L stainless steel specimens, and reveal the fatigue damage mechanism of SLM 316L stainless steel parts.


  • Open Access

    Effect of Process Parameters and Layer Thickness on the Quality and Performance of Ti-6Al-4V Fabricated by Selective Laser Melting

    by Yanlong Jing, Peng Wang, Xiaoling Yan

    To improve the quality of thick powder bed and realize the matching of thick powder bed and thin powder bed in the later stage, the influence of process parameters for the single-track, multi-layer fabrication, relative density, surface quality, defect, remelting, and boundary optimization performance of different layer thicknesses of Ti-6Al-4V fabricated by selective laser melting were investigated. It is more conducive to the stable forming of single-track when the point distance is half the diameter of the laser beam, and the exposure time is appropriately extended. The thin powder bed needs the corresponding point distance and exposure time under the laser power of 280–380 W to obtain high-density specimens. The thick powder bed needs to be able to ensure the formation of high-quality specimens under the smaller point distance and longer exposure time under higher laser power of 380 W. Both thick powder bed and thin powder bed will cause un-melted defects between molten pools, spheroidization defects caused by splashing, and microporous defects. The remelting process can significantly improve the surface quality of the formed specimen, but the surface quality of the thick powder bed is worse than that of the thin powder bed. The boundary quality of thick powder bed is worse than that of thin powder bed, and the boundary shape has a greater influence on the quality of the SLM forming boundary. Different strategies should be adopted to form the boundary of different shapes. Increasing the boundary count and increasing the laser power are more conducive to the improvement of boundary quality.


  • Open Access

    Study on the Measurement of Stress in the Surface of Selective Laser Melting Forming Parts Based on the Critical Refraction Longitudinal Wave

    by Xiaoling Yan, Xiansheng Xu, Qinxue Pan

    Measurement and control of stress in the metal forming layer is the basic problem of selective laser melting (SLM) forming parts. The critical refraction longitudinal (LCR) wave method to test stress in metallic materials has been extensively studied. However, when testing of stress in selective laser melting (SLM) forming parts using this method, some deep-seated regularities of this technology are still not clear. In order to reveal the mechanism of the LCR wave method to measure stress in SLM forming parts, specimens made of 316 L stainless steel were manufactured using meander, stripe, and chessboard scanning strategies. Static load tensile test were applied to SLM forming specimens, with the purpose to demonstrate the scanning strategy has important effect on the LCR wave method to test stress in SLM forming parts. The regularity of the LCR wave velocity on stress is obtained in this study. The anisotropic microstructure of SLM forming parts has an unneglectable effect on the LCR wave stress test. The essential principle of anisotropic microstructure effecting the LCR wave velocity in SLM forming parts were revealed in the experiments. The results of the experiment provide a basis for non-destructive and reliable test of stress in SLM forming parts and other inhomogeneous materials.


  • Open Access

    Ultrasonic Measurement of Stress in SLM 316L Stainless Steel Forming Parts Manufactured Using Different Scanning Strategies

    by Xiaoling Yan, Jincheng Pang, Yanlong Jing

    Selective Laser Melting (SLM) technology is a new kind of additive manufacturing technology developed in in the last decade. Measurement and control of stress in metal forming layer is the basic problem of SLM forming parts. Critical Refraction Longitudinal (LCR) wave method was used to measure stress. The acoustic-elastic formulas for measuring stresses in SLM 316L stainless steel forming parts manufactured using meander, stripe, and chess board scanning strategies, respectively, were established based on static load tensile test. The experimental results show that the acoustic time difference of LCR wave in SLM specimen manufactured with 316L stainless steel increases linearly with the increase of stress when the tensile stress is less than critical stress (372 MPa, 465 MPa, and 494 MPa). Due to the inhomogeneous deformation of the anisotropic SLM forming layer and the dimple-micropore aggregation fracture mechanism, the acousto-elastic curve fluctuates up and down along the irregular curve when the tensile stress is larger than critical stress. The results of corroboration experiments show that nondestructive measurement of stress in SLM forming specimen can be realized by using LCR wave method. The scanning strategy can significantly affect the tensile strength and yield strength of SLM forming specimen. The stresses were all in tension stress state at the edge of the specimens, whatever scanning strategy was used. Sub-area scanning and scanning sequence of alternate and intersect were adopted, which can effectively reduce the stress in the SLM forming specimen. The overall stress values of SLM forming specimen manufactured using chess board scanning strategy were smaller than that using meander and stripe strategies. The distribution of stress were more uniform.


  • Open Access

    Progress and Challenges of Ultrasonic Testing for Stress in Remanufacturing Laser Cladding Coating

    by Xiao-Ling Yan, Shi-Yun Dong, Bin-Shi Xu, Yong Cao

    Stress in laser cladding coating is an important factor affecting the safe operation of remanufacturing components. Ultrasonic testing has become a popular approach in the nondestructive evaluation of stress, because it has the advantages of safety, nondestructiveness, and online detection. This paper provides a review of ultrasonic testing for stress in remanufacturing laser cladding coating. It summarizes the recent research outcomes on ultrasonic testing for stress, and analyzes the mechanism of ultrasonic testing for stress. Remanufacturing laser cladding coating shows typical anisotropic behaviors. The ultrasonic testing signal in laser cladding coating is influenced by many complex factors, such as microstructure, defect, temperature, and surface roughness, among others. At present, ultrasonic testing for stress in laser cladding coating can only be done roughly. This paper discusses the active mechanism of micro/macro factors in the reliability of stress measurement, as well as the impact of stress measurement on the quality and safety of remanufacturing components. Based on the discussion, this paper proposes strategies to nondestructively, rapidly, and accurately measure stress in remanufacturing laser cladding coating.