Thermo-Mechanics of the Hierarchical Structure of ITER Superconducting Cables
- 23 July 2007
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 17 (2) , 1362-1365
Abstract
Recent experimental tests on the model coils have shown that the behavior of Nb3Sn based cables is not as good as expected on the basis of the characteristics evaluated for the uncabled strands. This degradation of the cable performance seems to be due to various factors, among which the strain state of the filaments due to bending and contact phenomena inside the cable. After these results it was decided that high performance strands will be used for ITER magnets, even if they have never been tested on a full size cable. Therefore the capability of evaluating the coil performance from the strands characteristics becomes a crucial point in the Research and Development (R&D) activity. Recently some extrapolations were attempted, but the mechanical model used is rather simplified and needs some fitting parameters which are not known a priori. In this work we present a thermo-mechanical model suitably developed to evaluate the strain state of a Nb3Sn strand inside a superconducting (SC) cable. It is based on the idea of multiscale modeling, starting from a enriched formulation of the beam kinematics to take into account the fibrous nature of a multifilamentary strand. The method consists in performing a successive substitution of discrete models involving many beams with a single equivalent beam model, which behavior is identified from the preceding cabling stage. This recursive substitution allows to perform the analysis within a reasonable computational time. Once the stress and strain fields are obtained at the higher level, a suitable unsmearing technique gives the strain till the first level, on the scale of the SC filament. The method is applied to the real case of the 3 times 3 and 3 times 3 times 5 CICC sub-size samples tested at FZK in Germany.Keywords
This publication has 19 references indexed in Scilit:
- THELMA Code Analysis of Bronze Route$rm Nb_3rm Sn$Strand Bending Effect on$rm I_rm c$IEEE Transactions on Applied Superconductivity, 2006
- Thermal and Bending Strain on$rm Nb_3rm Sn$StrandsIEEE Transactions on Applied Superconductivity, 2006
- Status of the ITER magnetsSuperconductor Science and Technology, 2006
- Coupled mechanical–electromagnetic–thermal–hydraulic effects in Nb3Sn cable-in-conduit conductors for ITERSuperconductor Science and Technology, 2005
- The ITER toroidal field model coil projectFusion Engineering and Design, 2005
- Multiscale analysis of the influence of the triplet helicoidal geometry on the strain state of a Nb3Sn based strand for ITER coilsCryogenics, 2005
- A multilevel homogenised model for superconducting strand thermomechanicsCryogenics, 2005
- Experimental Investigation on the Effect of Transverse Electromagnetic Force on the V-T Curve of the CIC ConductorIEEE Transactions on Applied Superconductivity, 2004
- CORRECTORS IN A BEAM MODEL FOR UNIDIRECTIONAL COMPOSITESMechanics of Advanced Materials and Structures, 1997
- Use of homogenization theory to build a beam element with thermo-mechanical microscale propertiesSTRUCTURAL ENGINEERING AND MECHANICS, 1996