Structural Designing of Supersonic Swirling Devices Based on Computational Fluid Dynamics Theory
Open Access
- 27 December 2024
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 15 (1) , 151
Abstract
The supersonic swirling device is a new apparatus that can be used for natural-gas liquefaction. The structure of the supersonic swirling device has an important impact on the liquefaction efficiency. Therefore, this study presents a structural design method for supersonic cyclones based on CFD theory. Using the production parameters of a liquefied natural gas (LNG) peak-shaving station as the study case, a detailed design and design comparison of each part of the supersonic swirling separator are carried out. An optimum LNG supersonic swirling separator design was obtained. To ensure that the designed supersonic swirling separator achieved better liquefaction effectiveness, it was ascertained that no large shockwaves were generated in the de Laval nozzle, the pressure loss on the swirler was small, and the swirler was able to produce a large centripetal acceleration. The opening angle of the diffuser and the length of the straight tube were designed considering the location at which normal shockwaves were generated. The location at which shockwaves are generated and the friction effect are important parameters that determine the gap size. With this design guidance, the optimal structural dimensions of the supersonic swirling device for a given processing capacity were determined as follows: a swirler with six vanes and an 8 mm wide channel; a 10D-long straight tube, an opening angle of 20° between the straight tube and the divergent section, and a gap size of 2 mm. Compared with “Twister II”, the new device has better liquefaction efficiency.Keywords
Funding Information
- National Natural Science Foundation of China (51904051, 52302402, CSTB2024NSCQ-MSX1103, cstc2021jcyj-msxmX0918, cstc2021jcyj-msxmX0978, KJQN202101545)
- Natural Science Foundation of Chongqing, China (51904051, 52302402, CSTB2024NSCQ-MSX1103, cstc2021jcyj-msxmX0918, cstc2021jcyj-msxmX0978, KJQN202101545)
- Science and Technology Research Program of the Chongqing Municipal Education Commission (51904051, 52302402, CSTB2024NSCQ-MSX1103, cstc2021jcyj-msxmX0918, cstc2021jcyj-msxmX0978, KJQN202101545)
This publication has 28 references indexed in Scilit:
- Machinability evolution of gas–liquid-solid three-phase rotary abrasive flow finishingThe International Journal of Advanced Manufacturing Technology, 2023
- Numerical simulation of supersonic condensation flows using Eulerian-Lagrangian and Eulerian wall film modelsEnergy, 2022
- Analysis for spiral vortex and effect of profile of nozzle and swirler on performance of supersonic separatorChemical Engineering and Processing - Process Intensification, 2020
- Prediction of supersonic condensation process of methane gas considering real gas effectsApplied Thermal Engineering, 2020
- Supersonic separation technology for natural gas processing: A reviewChemical Engineering and Processing - Process Intensification, 2019
- Condensation characteristics of natural gas in the supersonic liquefaction processEnergy, 2019
- Structure improvements and numerical simulation of supersonic separatorsChemical Engineering and Processing - Process Intensification, 2016
- Rheology‐Based Computational Fluid Dynamics Modeling for De‐oiling Hydrocyclone EfficiencyChemical Engineering & Technology, 2016
- Numerical simulation of natural gas flows in diffusers for supersonic separatorsEnergy, 2012
- Supersonic swirling characteristics of natural gas in convergent-divergent nozzlesPetroleum Science, 2011