The Electrolytic Reduction of MoO 3 in CaCl 2 -NaCl Molten Salt
- 1 August 2022
- journal article
- research article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 169 (8) , 082516
Abstract
Electro-deoxidation reduction technology is a very attractive method used to treat oxides in metallurgical industry. In this paper, cyclic voltammetry, square wave voltammetry and open circuit chronopotentiometry were applied to study the electrochemical behavior of MoO 3 cathode in the CaCl 2 -NaCl melt at 873 K. Through the electrolytic reduction of MoO 3 at different potentials (−1.15 V, −1.45 V and −1.75 V, vs Ag/AgCl) and XRD analysis, MoO 3 was found to be transformed into several intermediate compounds (CaMoO 4 , MoO 2 and Na 1.4 Mo 2 O 4 ) and finally reduced to metallic Mo. When the electrolysis time was increased from 3 to 18.5 h and the employed potential was reduced from −1.75 V to −2.30 V (vs Ag/AgCl), the intermediate compounds could be completely reduced to metallic Mo, and the reduction ratio of MoO 3 was calculated to be 93.7%.Keywords
Funding Information
- Natural Science Foundation of Shanghai Municipality (22ZR1474700)
- Shanghai Sailing Program (19YF1458200)
- Chinese Academy of Sciences, Shanghai Branch (JCYJ-SHFY-2021-003)
- National Natural Science Foundation of China (22006150)
This publication has 36 references indexed in Scilit:
- Electro-deoxidation of hafnium dioxide and niobia-doped hafnium dioxide in molten calcium chlorideElectrochimica Acta, 2012
- Calciothermic reduction of NiO by molten salt electrolysis of CaO in CaCl2 meltElectrochimica Acta, 2011
- Mechanistic insight of electrochemical reduction of Ta2O5 to tantalum in a eutectic CaCl2–NaCl molten saltJournal of Alloys and Compounds, 2010
- The electro-deoxidation of porous titanium dioxide precursors in molten calcium chloride under cathodic potential controlElectrochimica Acta, 2009
- Electrochemically Driven Three‐Phase Interlines into Insulator Compounds: Electroreduction of Solid SiO2 in Molten CaCl2Chemphyschem, 2006
- Direct electrochemical production of Ti–10W alloys from mixed oxide preform precursorsJournal of Alloys and Compounds, 2006
- Electrolytic synthesis of TbFe2 from Tb4O7 and Fe2O3 powders in molten CaCl2Journal of Electroanalytical Chemistry, 2006
- Electrochemical Reduction of UO[sub 2] in Molten CaCl[sub 2] or LiClJournal of the Electrochemical Society, 2006
- A study of cathode improvement for electro-deoxidation of Nb2O5 in a eutectic CaCl2–NaCl melt at 1073KJournal of Alloys and Compounds, 2005
- Electrochemical Studies on Reduction of Solid Nb[sub 2]O[sub 5] in Molten CaCl[sub 2]-NaCl EutecticJournal of the Electrochemical Society, 2005