Nan Ji
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Nan Ji has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
Hao Peng
Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800, People’s Republic of China
5 shared publicationsWei Huang
Key Laboratory of Thorium Energy, Shanghai Institute of Applied Physics, Chinese Academy of Science, Shanghai, 201800, People’s Republic of China
5 shared publications- Yu Gong
Shanghai Institute of Applied Physics, Chinese Academy of Sciences
5 shared publications - Feng Jiang
Key Laboratory of Thorium Energy, Shanghai Institute of Applied Physics, Chinese Academy of Science, Shanghai, 201800, People’s Republic of China
3 shared publications Hao Chen
Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800, People’s Republic of China
3 shared publications- Wei Huang
Shanghai Institute of Applied Physics, Chinese Academy of Sciences
3 shared publications
Latest Publications
- 1 July 2025
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 172 (7) , 072506
Electrochemical and Kinetic Analysis of Lu(III) Extraction by Liquid Ga Electrode in NaCl-CaCl2 Melt
This study systematically investigates the electrochemical behavior of Lu(III) on inert molybdenum (Mo) and liquid gallium (Ga) electrodes in NaCl-CaCl2 molten salt at 923 K. A combination of cyclic voltammetry (CV), square wave voltammetry (SWV), and reverse chronopotentiometry (RCP) was employed to elucidate the underlying electrochemical mechanisms. The diffusion coefficients of Lu(III) ions were determined from chronopotentiometry (CP) measurements. Lu-Ga intermetallic compounds were formed via the co-deposition of Lu(III) and Ga(III) on an inert electrode. Thermodynamic properties, including equilibrium potential and Gibbs free energy change of formation, were evaluated using open-circuit potential (OCP) measurements. Additionally, linear polarization (LP) analysis was performed to investigate the kinetics of the Lu(III)/Lu reduction on Mo and liquid Ga electrodes, yielding exchange current densities and charge transfer resistance at various temperatures. Furthermore, constant potential electrolysis (CPE) at different potentials (−1.4 V, −1.6 V, −1.7 V on liquid Ga and −1.9 V on Mo) for 15 h enabled the recovery of Lu(III) from the molten salt. Metallic Lu and Ga3Lu formed on Mo and liquid Ga electrodes respectively. The formed metallic Lu and Ga3Lu were characterized by XRD. Lu extraction rates reached 95.59% on Mo and 98.99% on liquid Ga, showing the latter’s higher efficiency.
- 1 July 2025
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 172 (7) , 072506
Electrochemical and Kinetic Analysis of Lu(III) Extraction by Liquid Ga Electrode in NaCl-CaCl2 Melt
This study systematically investigates the electrochemical behavior of Lu(III) on inert molybdenum (Mo) and liquid gallium (Ga) electrodes in NaCl-CaCl2 molten salt at 923 K. A combination of cyclic voltammetry (CV), square wave voltammetry (SWV), and reverse chronopotentiometry (RCP) was employed to elucidate the underlying electrochemical mechanisms. The diffusion coefficients of Lu(III) ions were determined from chronopotentiometry (CP) measurements. Lu-Ga intermetallic compounds were formed via the co-deposition of Lu(III) and Ga(III) on an inert electrode. Thermodynamic properties, including equilibrium potential and Gibbs free energy change of formation, were evaluated using open-circuit potential (OCP) measurements. Additionally, linear polarization (LP) analysis was performed to investigate the kinetics of the Lu(III)/Lu reduction on Mo and liquid Ga electrodes, yielding exchange current densities and charge transfer resistance at various temperatures. Furthermore, constant potential electrolysis (CPE) at different potentials (−1.4 V, −1.6 V, −1.7 V on liquid Ga and −1.9 V on Mo) for 15 h enabled the recovery of Lu(III) from the molten salt. Metallic Lu and Ga3Lu formed on Mo and liquid Ga electrodes respectively. The formed metallic Lu and Ga3Lu were characterized by XRD. Lu extraction rates reached 95.59% on Mo and 98.99% on liquid Ga, showing the latter’s higher efficiency.
- 1 February 2025
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 172 (2) , 022501
Kinetic Analysis of the YbCl3 Reduction Processes on Zn Cathode in Molten Salt Electrolysis
Molten salt electrolysis represents an economical technique for the extraction and purification of metals while also enabling the reprocessing of spent fuel. The kinetic parameters of the electrolytic refining process are intricate and significant influence the separation of lanthanides and actinides. Here we report an investigation of the kinetics of the reduction process of Yb(III) on a cathodic Zn electrode and the influencing factors that impact the efficiency of electrolytic extraction in LiCl-KCl molten salt. The exchange current densities of Yb(II)/Ybin Zn couple on the liquid Zn electrode was measured by polarization curves, and the activation energy was calculated 18.02 kJ mol−1. Moreover, Yb was extracted on the Zn electrode from molten salt by potentiostatic electrolysis and galvanostatic electrolysis. The concentration of Yb(III) in the molten salt was measured using ICP-OES every 2 h, and the extraction efficiency and average extraction rate were calculated. The electrolysis condition with the highest extraction efficiency (98.39%) was by GE at 47.24 mA cm−2 when the electrolysis time was 10 h. The products of extraction were characterized by X-ray diffraction and scanning electron microscopy energy-dispersive spectroscopy to analyze the phase composition and microstructure of the alloy.
- 1 February 2025
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 172 (2) , 022501
Kinetic Analysis of the YbCl3 Reduction Processes on Zn Cathode in Molten Salt Electrolysis
Molten salt electrolysis represents an economical technique for the extraction and purification of metals while also enabling the reprocessing of spent fuel. The kinetic parameters of the electrolytic refining process are intricate and significant influence the separation of lanthanides and actinides. Here we report an investigation of the kinetics of the reduction process of Yb(III) on a cathodic Zn electrode and the influencing factors that impact the efficiency of electrolytic extraction in LiCl-KCl molten salt. The exchange current densities of Yb(II)/Ybin Zn couple on the liquid Zn electrode was measured by polarization curves, and the activation energy was calculated 18.02 kJ mol−1. Moreover, Yb was extracted on the Zn electrode from molten salt by potentiostatic electrolysis and galvanostatic electrolysis. The concentration of Yb(III) in the molten salt was measured using ICP-OES every 2 h, and the extraction efficiency and average extraction rate were calculated. The electrolysis condition with the highest extraction efficiency (98.39%) was by GE at 47.24 mA cm−2 when the electrolysis time was 10 h. The products of extraction were characterized by X-ray diffraction and scanning electron microscopy energy-dispersive spectroscopy to analyze the phase composition and microstructure of the alloy.
- 1 June 2023
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 170 (6) , 062501
Electrolytic Reduction of ZnO in the CaCl2-NaCl Molten Salt
Electrolytic reduction technology plays a significant role in industrial metal production. In present work, cyclic voltammetry (CV) and square wave voltammetry (SWV) were applied to study the electrochemical behaviors of ZnO cathode in the CaCl2-NaCl melt at 873 K. During the experiment, we found that the dissolution-electrodeposition mechanism (ZnO = Zn2+ + O2−, Zn2+ + 2e− = Zn) dominates the electrolytic reduction of ZnO, and the contribution of the direct-reduction from solid phase (ZnO + 2e− = Zn + O2−) is small. Furthermore, the electro-reduction of ZnO was conducted by potentiostatic electrolysis. The peak potential of ZnO to Zn was −0.48 V vs Ag/Ag+. Therefore, the metallic Zn can be obtained at an applied potential of −0.80 V (vs Ag/Ag+). When the applied potential increased to −2.00 V (vs Ag/Ag+), the Zn and CaZn3 alloy were formed simultaneously. The electrolytic products were confirmed by X-ray diffraction (XRD) analysis. This study proved the feasibility of electro-reduction technology to prepare Zn metal through the reduction of ZnO material.
- 1 June 2023
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 170 (6) , 062501
Electrolytic Reduction of ZnO in the CaCl2-NaCl Molten Salt
Electrolytic reduction technology plays a significant role in industrial metal production. In present work, cyclic voltammetry (CV) and square wave voltammetry (SWV) were applied to study the electrochemical behaviors of ZnO cathode in the CaCl2-NaCl melt at 873 K. During the experiment, we found that the dissolution-electrodeposition mechanism (ZnO = Zn2+ + O2−, Zn2+ + 2e− = Zn) dominates the electrolytic reduction of ZnO, and the contribution of the direct-reduction from solid phase (ZnO + 2e− = Zn + O2−) is small. Furthermore, the electro-reduction of ZnO was conducted by potentiostatic electrolysis. The peak potential of ZnO to Zn was −0.48 V vs Ag/Ag+. Therefore, the metallic Zn can be obtained at an applied potential of −0.80 V (vs Ag/Ag+). When the applied potential increased to −2.00 V (vs Ag/Ag+), the Zn and CaZn3 alloy were formed simultaneously. The electrolytic products were confirmed by X-ray diffraction (XRD) analysis. This study proved the feasibility of electro-reduction technology to prepare Zn metal through the reduction of ZnO material.
- 1 April 2023
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 170 (4) , 042504
Electrolytic reduction of Gd2O3-ZnO in NaCl-CaCl2 Molten Salt
The electrochemical behaviors of Gd2O3, ZnO and Gd2O3-ZnO in NaCl-CaCl2 molten salt was studied by cyclic voltammetry and square wave voltammetry, and the corresponding constant potential electrolysis and XRD analysis indicated that the reduction processes were in agreement with the process that 3PI (metal∣oxide∣electrolyte three-phase interline) expanded with time from surface to interior of the cathode. Moreover, the addition of ZnO could promote the electrochemical reduction of Gd2O3. According to the electrochemical behavior (CV) and the characterization (XRD and SEM-EDS) of electrolytic product, the intermetallic compounds, GdZn12, Gd2Zn17 and Gd13Zn58, were generated during the electrolysis of Gd2O3-ZnO cathode without dendritic deposits.
- 1 April 2023
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 170 (4) , 042504
Electrolytic reduction of Gd2O3-ZnO in NaCl-CaCl2 Molten Salt
The electrochemical behaviors of Gd2O3, ZnO and Gd2O3-ZnO in NaCl-CaCl2 molten salt was studied by cyclic voltammetry and square wave voltammetry, and the corresponding constant potential electrolysis and XRD analysis indicated that the reduction processes were in agreement with the process that 3PI (metal∣oxide∣electrolyte three-phase interline) expanded with time from surface to interior of the cathode. Moreover, the addition of ZnO could promote the electrochemical reduction of Gd2O3. According to the electrochemical behavior (CV) and the characterization (XRD and SEM-EDS) of electrolytic product, the intermetallic compounds, GdZn12, Gd2Zn17 and Gd13Zn58, were generated during the electrolysis of Gd2O3-ZnO cathode without dendritic deposits.
- 1 January 2023
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 170 (1) , 013502
Electrochemical Study of Eu(III)/Eu(II) in LiF-BeF2 Molten Salt
The electrochemical behavior of Eu(III)/Eu(II) (C Eu total = 2.34 × 10−5 mol g−1) in LiF-BeF2 (FLiBe) molten salt is studied by cyclic voltammetry (CV), square wave voltammetry (SWV), chrono potentiometry (CP) and linear polarization (LP) in the temperature range of 773 to 973 K. The coexistence of Eu(III) and Eu(II) and the ratio of Eu(III)/Eu(II) are determined by SWV test. The redox reaction of Eu(III)/Eu(II) couple on an inert tungsten electrode is demonstrated to be a quasi-reversible process with diffusion controlled mass transfer. The diffusion coefficient and diffusion activation energy of Eu(III) and Eu(II) are obtained by CP method at different temperature. The thermodynamic and kinetic characteristics of the redox reaction of Eu(III)/Eu(II) couple are investigated by various electrochemical methods. With the obtained data, the thermodynamic data ΔG 0 (−1046.1 KJ mol−1), ΔH 0 (−1218.2 KJ mol−1), ΔS 0 (−0.197 KJ mol−1), and E 0 EuF2/Eu (−0.799 V vs E 0 BeF2/Be ) for EuF2 are calculated at 873 K and the possibility of the application of the Eu(III)/Eu(II) couple as redox buffering species or salt potential indicator is evaluated.
- 1 January 2023
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 170 (1) , 013502
Electrochemical Study of Eu(III)/Eu(II) in LiF-BeF2 Molten Salt
The electrochemical behavior of Eu(III)/Eu(II) (C Eu total = 2.34 × 10−5 mol g−1) in LiF-BeF2 (FLiBe) molten salt is studied by cyclic voltammetry (CV), square wave voltammetry (SWV), chrono potentiometry (CP) and linear polarization (LP) in the temperature range of 773 to 973 K. The coexistence of Eu(III) and Eu(II) and the ratio of Eu(III)/Eu(II) are determined by SWV test. The redox reaction of Eu(III)/Eu(II) couple on an inert tungsten electrode is demonstrated to be a quasi-reversible process with diffusion controlled mass transfer. The diffusion coefficient and diffusion activation energy of Eu(III) and Eu(II) are obtained by CP method at different temperature. The thermodynamic and kinetic characteristics of the redox reaction of Eu(III)/Eu(II) couple are investigated by various electrochemical methods. With the obtained data, the thermodynamic data ΔG 0 (−1046.1 KJ mol−1), ΔH 0 (−1218.2 KJ mol−1), ΔS 0 (−0.197 KJ mol−1), and E 0 EuF2/Eu (−0.799 V vs E 0 BeF2/Be ) for EuF2 are calculated at 873 K and the possibility of the application of the Eu(III)/Eu(II) couple as redox buffering species or salt potential indicator is evaluated.
- 1 October 2022
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 169 (10) , 102512
Electrolytic Reduction of U 3 O 8 and U 3 O 8 -MoO 3 in CaCl 2 -NaCl Molten Salt
Electro-deoxidation technology plays an important role in both industrial production and spent fuel reprocessing. In this work, the cyclic voltammetry (CV), square wave voltammetry (SWV) and open circuit chronopotentiometry (OCP) were applied to study the electrochemical behavior of U 3 O 8 and MoO 3 cathode in the CaCl 2 -NaCl melt at 873 K. The electrolytic reduction of U 3 O 8 -MoO 3 was conducted at −2.38 V (vs Ag/AgCl) for 3.8 h, and the reduced production of metallic U and Mo was successfully confirmed by XRD analysis.
- 1 October 2022
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 169 (10) , 102512
Electrolytic Reduction of U 3 O 8 and U 3 O 8 -MoO 3 in CaCl 2 -NaCl Molten Salt
Electro-deoxidation technology plays an important role in both industrial production and spent fuel reprocessing. In this work, the cyclic voltammetry (CV), square wave voltammetry (SWV) and open circuit chronopotentiometry (OCP) were applied to study the electrochemical behavior of U 3 O 8 and MoO 3 cathode in the CaCl 2 -NaCl melt at 873 K. The electrolytic reduction of U 3 O 8 -MoO 3 was conducted at −2.38 V (vs Ag/AgCl) for 3.8 h, and the reduced production of metallic U and Mo was successfully confirmed by XRD analysis.
- 1 October 2022
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 169 (10) , 102505
The Electrochemical Behavior of Neodymium(III) in FLiNaK Molten Salt on Pt Cathode
The extraction of rare earth element neodymium (Nd) from LiF-NaF-KF (FLiNaK) molten salt by electrochemical reduction was introduced in this paper. Cyclic voltammetry (CV) and square wave voltammetry (SWV) results showed that Nd(III) can be reduced to Nd(0) by a one-step three electrons process: Nd(III) + 3e − → Nd(0), and the diffusion coefficient ( D ), the transfer coefficient ( α ) and the rate constant of standard reaction ( k 0 ) of Nd (III) in FLiNaK melt at 823 K were calculated by CV and sem-integral analysis of the CV curves. The deposits of Nd on Pt cathode were confirmed by the potentiostatic electrolysis and characterized by SEM, EDS and XRD. The electrolytic products were composed mainly of Nd metal and two intermetallic compounds NdPt 2 and NdPt. All of these results demonstrated the feasibility of electrolytic separation of Nd(III) on Pt cathode in FLiNaK molten salt.
- 1 October 2022
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 169 (10) , 102505
The Electrochemical Behavior of Neodymium(III) in FLiNaK Molten Salt on Pt Cathode
The extraction of rare earth element neodymium (Nd) from LiF-NaF-KF (FLiNaK) molten salt by electrochemical reduction was introduced in this paper. Cyclic voltammetry (CV) and square wave voltammetry (SWV) results showed that Nd(III) can be reduced to Nd(0) by a one-step three electrons process: Nd(III) + 3e − → Nd(0), and the diffusion coefficient ( D ), the transfer coefficient ( α ) and the rate constant of standard reaction ( k 0 ) of Nd (III) in FLiNaK melt at 823 K were calculated by CV and sem-integral analysis of the CV curves. The deposits of Nd on Pt cathode were confirmed by the potentiostatic electrolysis and characterized by SEM, EDS and XRD. The electrolytic products were composed mainly of Nd metal and two intermetallic compounds NdPt 2 and NdPt. All of these results demonstrated the feasibility of electrolytic separation of Nd(III) on Pt cathode in FLiNaK molten salt.
- 1 August 2022
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 169 (8) , 082516
The Electrolytic Reduction of MoO 3 in CaCl 2 -NaCl Molten Salt
Electro-deoxidation reduction technology is a very attractive method used to treat oxides in metallurgical industry. In this paper, cyclic voltammetry, square wave voltammetry and open circuit chronopotentiometry were applied to study the electrochemical behavior of MoO 3 cathode in the CaCl 2 -NaCl melt at 873 K. Through the electrolytic reduction of MoO 3 at different potentials (−1.15 V, −1.45 V and −1.75 V, vs Ag/AgCl) and XRD analysis, MoO 3 was found to be transformed into several intermediate compounds (CaMoO 4 , MoO 2 and Na 1.4 Mo 2 O 4 ) and finally reduced to metallic Mo. When the electrolysis time was increased from 3 to 18.5 h and the employed potential was reduced from −1.75 V to −2.30 V (vs Ag/AgCl), the intermediate compounds could be completely reduced to metallic Mo, and the reduction ratio of MoO 3 was calculated to be 93.7%.
- 1 August 2022
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 169 (8) , 082516
The Electrolytic Reduction of MoO 3 in CaCl 2 -NaCl Molten Salt
Electro-deoxidation reduction technology is a very attractive method used to treat oxides in metallurgical industry. In this paper, cyclic voltammetry, square wave voltammetry and open circuit chronopotentiometry were applied to study the electrochemical behavior of MoO 3 cathode in the CaCl 2 -NaCl melt at 873 K. Through the electrolytic reduction of MoO 3 at different potentials (−1.15 V, −1.45 V and −1.75 V, vs Ag/AgCl) and XRD analysis, MoO 3 was found to be transformed into several intermediate compounds (CaMoO 4 , MoO 2 and Na 1.4 Mo 2 O 4 ) and finally reduced to metallic Mo. When the electrolysis time was increased from 3 to 18.5 h and the employed potential was reduced from −1.75 V to −2.30 V (vs Ag/AgCl), the intermediate compounds could be completely reduced to metallic Mo, and the reduction ratio of MoO 3 was calculated to be 93.7%.
- 1 September 2021
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 168 (9) , 092503
Electrochemical Behavior of Tb (III) in LiCl–KCl Molten Salt on Liquid Zn Electrode
The electrochemical behavior of Tb ions on the inert W electrode and the liquid Zn electrode in LiCl–KCl molten salt was investigated at 773 K by two kinds of electrochemical techniques (cyclic voltammetry and square wave voltammetry). The transfer electron of Tb ion was calculated to be 3 on the inert W electrode by square wave voltammetry (SWV) curve. The electrode reaction of Tb (III) and the reversibility of the reaction were analyzed on liquid Zn electrode by cyclic voltammetry (CV). The values of diffusion coefficient of Tb (III) were calculated to be 1.06 × 10 −5 cm 2 ·s −1 and 0.74 × 10 −5 cm 2 ·s −1 at 0.1 V s −1 on liquid Zn electrode by sem-integral of the CV curves and CV methods, respectively. The transfer coefficient ( α ) and the rate constant of standard reaction ( k 0 ) of Tb (III) were calculated at various scan rates on liquid Zn electrode by sem-integral analysis of the CV curves.
- 1 September 2021
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 168 (9) , 092503
Electrochemical Behavior of Tb (III) in LiCl–KCl Molten Salt on Liquid Zn Electrode
The electrochemical behavior of Tb ions on the inert W electrode and the liquid Zn electrode in LiCl–KCl molten salt was investigated at 773 K by two kinds of electrochemical techniques (cyclic voltammetry and square wave voltammetry). The transfer electron of Tb ion was calculated to be 3 on the inert W electrode by square wave voltammetry (SWV) curve. The electrode reaction of Tb (III) and the reversibility of the reaction were analyzed on liquid Zn electrode by cyclic voltammetry (CV). The values of diffusion coefficient of Tb (III) were calculated to be 1.06 × 10 −5 cm 2 ·s −1 and 0.74 × 10 −5 cm 2 ·s −1 at 0.1 V s −1 on liquid Zn electrode by sem-integral of the CV curves and CV methods, respectively. The transfer coefficient ( α ) and the rate constant of standard reaction ( k 0 ) of Tb (III) were calculated at various scan rates on liquid Zn electrode by sem-integral analysis of the CV curves.
- 1 August 2021
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 168 (8) , 082512
The Electrolytic Reduction of Gd 2 O 3 in LiCl-KCl-Li 2 O Molten Salt
In the common spent fuels, actinides and fission products are generally in the form of oxide, so direct dealing with oxide will be the most convenient way for spent fuel reprocessing. In this work, the electrolytic reduction of Gd 2 O 3 has been studied in LiCl-KCl-Li 2 O (1 wt%) melts at different conditions, and the effect of sintering temperature on the porosity of Gd 2 O 3 powder and the electrochemical behavior of Li 2 O in LiCl-KCl molten salt were investigated, too. The diffusion coefficient of O 2− was calculated to be 2.0 × 10 −5 cm 2 ·s −1 in LiCl-KCl melts on the Mo electrode at 923 K by cyclic voltammetry (CV). The electrode process of Gd 2 O 3 powder was also analyzed in LiCl-KCl-Li 2 O (1 wt%) melts, and the formation process of composite oxide LiGdO 2 was determined. By the analysis of XRD and oxygen content characterization, it was suggested that after 74 h electrolysis (923 K, 3.40 V), the oxygen content of Gd 2 O 3 cathode decreased from 12.25 wt% to 1.41 wt%, indicating 88.5% Gd 2 O 3 was reduced to metal.
- 1 August 2021
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 168 (8) , 082512
The Electrolytic Reduction of Gd 2 O 3 in LiCl-KCl-Li 2 O Molten Salt
In the common spent fuels, actinides and fission products are generally in the form of oxide, so direct dealing with oxide will be the most convenient way for spent fuel reprocessing. In this work, the electrolytic reduction of Gd 2 O 3 has been studied in LiCl-KCl-Li 2 O (1 wt%) melts at different conditions, and the effect of sintering temperature on the porosity of Gd 2 O 3 powder and the electrochemical behavior of Li 2 O in LiCl-KCl molten salt were investigated, too. The diffusion coefficient of O 2− was calculated to be 2.0 × 10 −5 cm 2 ·s −1 in LiCl-KCl melts on the Mo electrode at 923 K by cyclic voltammetry (CV). The electrode process of Gd 2 O 3 powder was also analyzed in LiCl-KCl-Li 2 O (1 wt%) melts, and the formation process of composite oxide LiGdO 2 was determined. By the analysis of XRD and oxygen content characterization, it was suggested that after 74 h electrolysis (923 K, 3.40 V), the oxygen content of Gd 2 O 3 cathode decreased from 12.25 wt% to 1.41 wt%, indicating 88.5% Gd 2 O 3 was reduced to metal.