Abstract
Dimensional accuracy of composites manufacturing is a major issue for part producers, especially when tight tolerances are required. One of the main causes of dimensional variations is the resin volumetric changes during the cure. In this article, volumetric cure shrinkage of a one part epoxy system was characterized using two different methods. First, a modified rheology method was used to measure the volumetric cure shrinkage after the gel point. Second, a gravimetric method measured the shrinkage over the entire cure. A linear relationship between the volumetric cure shrinkage and the degree‐of‐cure was deduced from the results and the resin cure kinetic models. Results show a good agreement between the two techniques. POLYM. COMPOS., 31:1603–1610, 2010. © 2009 Society of Plastics Engineers
Funding Information
  • Consortium for Research and Innovation in Aerospace in Quebec
  • Natural Sciences and Engineering Research Council of Canada
  • Bell Helicopter Textron Canada and Delastek Inc

This publication has 13 references indexed in Scilit: