Erosion enhancement by impurity entrainment in the highly collisional plasmas of Magnum-PSI
Open Access
- 27 November 2024
- journal article
- research article
- Published by IOP Publishing in Nuclear Fusion
- Vol. 65 (2) , 026009
Abstract
Extrinsic impurity seeding is planned for ITER to avoid high heat fluxes to the tungsten divertor targets. Nevertheless, excessive sputtering by impurities would lead to a reduction in fusion power output and divertor lifetime. Unlike today’s fusion devices, the entrainment of impurities is expected to play an increasing role in ITER’s highly collisional near-surface plasma. Impurity entrainment refers to the acceleration of impurities with the plasma flow by collisional drag, leading to elevated impact energies. To investigate impurity entrainment under ITER-like divertor plasma conditions ( n e > 2 × 10 20 m−3, T e < 5 eV), argon-seeded hydrogen plasmas were formed in the linear plasma generator Magnum-PSI. Doppler shifts in spatially-resolved emission profiles of argon (Ar II - 480.6 nm) and hydrogen (H β - 486.1 nm) reveal the entrainment of seeded argon towards the upstream hydrogen velocity (∼9 cm from the surface), corresponding to ∼0.39 of the common-system sound speed. In addition, the sputtering yield of tungsten by argon bombardment for the argon-seeded hydrogen plasma was compared to a pure argon plasma by monitoring tungsten (W I - 400.9 nm) emission. These sputtering experiments reveal further entrainment of the argon impurities to ∼0.65 of the common-system sound speed at the sheath edge, leading to a large increase in their impact energy. Extrapolation of the Magnum-PSI results to ITER, using existing SOLPS-ITER simulations to determine the divertor plasma conditions, indicates more than an order of magnitude increase in gross erosion of the divertor targets due to impurity entrainment. However, the net erosion rate could still be kept under control if high re-deposition rates are achieved, which is treated in the companion paper (Cornelissen M.J.H. et al 2025 Nucl. Fusion 65 026008). The combination of a low sputtering threshold energy and high impact energy of impurities constrains the fine balance between radiative cooling with impurity seeding and avoiding extensive divertor erosion.Keywords
Funding Information
- Euratom Research and Training Programme (101052200)
This publication has 50 references indexed in Scilit:
- Sputter yields of rough surfaces: Importance of the mean surface inclination angle from nano- to microscopic rough regimesApplied Surface Science, 2021
- High-fluence and high-flux performance characteristics of the superconducting Magnum-PSI linear plasma facilityFusion Engineering and Design, 2019
- Operational characteristics of the superconducting high flux plasma generator Magnum-PSIFusion Engineering and Design, 2018
- Modelling of Impurity Transport and Plasma–Wall Interaction in Fusion Devices with the ERO Code: Basics of the Code and Examples of ApplicationContributions to Plasma Physics, 2016
- A full tungsten divertor for ITER: Physics issues and design statusJournal of Nuclear Materials, 2013
- Plasma surface interactions in impurity seeded plasmasJournal of Nuclear Materials, 2011
- Measurement of parallel transport of B+ and Al2+ impurities in a linear He+ plasmaJournal of Nuclear Materials, 2011
- ENERGY DEPENDENCE OF ION-INDUCED SPUTTERING YIELDS FROM MONATOMIC SOLIDS AT NORMAL INCIDENCEAtomic Data and Nuclear Data Tables, 1996
- Fluid Approximation of the Bohm Criterium for Plasmas of Several Ion SpeciesContributions to Plasma Physics, 1994
- Collision frequencies and energy transfer ionsPlanetary and Space Science, 1966