Investigation on the Microstructure and Compressive Properties of W-15Mo Alloy Fabricated via Laser Powder Bed Fusion
Open Access
Abstract
Solid solution with molybdenum is an effective strategy for improving the overall performance of tungsten alloys, thereby enhancing their application potential in aerospace and other fields. In this study, highly dense W-Mo alloy specimens were successfully fabricated using laser powder bed fusion, followed by stress-relief annealing. The results show that the complete solid solution of molybdenum yields a fine columnar grain structure with weak texture. After stress-relief annealing, the residual stress decreases, the grain size increases slightly, and the fraction of the //building direction (BD) texture rises. Ultimately, W-Mo alloy specimens with excellent compressive properties are obtained, with compressive yield strength, ultimate compressive strength, and compressive strain reaching 879.5 MPa, 1257.3 MPa, and 16.6%, respectively. This work provides new insights into the fabrication of refractory alloys by laser powder bed fusion.Keywords
Funding Information
- Ganpo Talented Individuals Support Program-Cultivation Project for Academic and Technological Leaders in Key Disciplines (20243BCE51053)
This publication has 43 references indexed in Scilit:
- Crack susceptibility of novel W-Nb-C alloy for laser beam powder bed fusion additive manufacturingActa Materialia, 2026
- Residual stress in metal additive manufacturing: influencing parameters, measurements, and control approachesJournal of Materials Science, 2025
- Laser based additive manufacturing of tungsten: Multi-scale thermo-kinetic and thermo-mechanical computational model and experimentsActa Materialia, 2023
- Selective laser melting of lanthanum oxide-reinforced tungsten composites: microstructure and mechanical propertiesTungsten, 2021
- Onset of periodic oscillations as a precursor of a transition to pore-generating turbulence in laser meltingAdditive Manufacturing Letters, 2021
- Selective laser melting high-performance ZrC-reinforced tungsten composites with tailored microstructure and suppressed cracking susceptibilityTungsten, 2021
- Strong morphological and crystallographic texture and resulting yield strength anisotropy in selective laser melted tantalumActa Materialia, 2013
- Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powderActa Materialia, 2013
- A study of the microstructural evolution during selective laser melting of Ti–6Al–4VActa Materialia, 2010
- Calculation of the taylor factor and lattice rotations for bcc metals deforming by pencil glideMetallurgical Transactions, 1971