Tunable kHz distributed feedback fiber laser enabled by glass additive-manufacturing
Authors:
Preprint
Abstract
For short sections of fibers tailored to a specific application, fast laser-based manufacturing techniques can be an attractive alternative to the often-cumbersome traditional manufacturing routes. Short, high gain fibers can be used in e.g., distributed feedback fiber lasers (DFFL) that offer sought after performance suitable for a broad range of applications in modern photonics. DFFLs offer superior stability and narrower linewidth compared to conventional fiber lasers. Tunable, narrow laser sources with output in eye-safe spectrum are desired for sensing, signal multiplexing, LIDAR systems etc. In this work we present DFFL obtained using Laser-Powder-Deposition made Er-doped silica fiber. Milliwatt level, ultra-narrow laser line (less than 4 kHz) was obtained using phase-shifted grating in 16 mm long fiber. The backward slope efficiency was as high as 24% when pumping at 976 nm. The results presented in this work showcase new possibilities in fiber fabrication that were unlocked through laser-assisted AM. This fiber laser sets the stage for the future of rapid fabrication of advanced fiber devices through unconventional manufacturing routes.Keywords
All Related Versions
- Version 1, 2024-07-05, ArXiv
- Version 2, 2024-07-26, ArXiv
- Published version: APL Photonics, 9 (11).
This publication has 27 references indexed in Scilit:
- Advances in laser‐based manufacturing techniques for specialty optical fiberJournal of the American Ceramic Society, 2024
- 3D Laser Engineering of Molten Core Optical Fibers: Toward a New Generation of Harsh Environment Sensing DevicesAdvanced Optical Materials, 2022
- Optical Fiber Sensors in Extreme Temperature and Radiation Environments: A ReviewIEEE Sensors Journal, 2022
- Optical fiber sensing for marine environment and marine structural health monitoring: A reviewOptics & Laser Technology, 2021
- Distributed feedback fiber laser based on a fiber Bragg grating inscribed using the femtosecond point-by-point techniqueLaser Physics Letters, 2018
- Erbium-doped photonic crystal fiber distributed feedback loop laser operating at 1550nmOptics & Laser Technology, 2012
- Line-by-Line Fiber Bragg Grating Made by Femtosecond LaserIEEE Photonics Technology Letters, 2010
- Er-doped fiber distributed feedback lasers: properties, applications and design considerations2003
- High pressure H 2 loading as a technique for achieving ultrahigh UV photosensitivity and thermal sensitivity in GeO 2 doped optical fibresElectronics Letters, 1993
- Yb 3+ sensitised Er 3+ doped silica optical fibre with ultrahigh transfer efficiency and gainElectronics Letters, 1991