Tunable kHz distributed feedback fiber laser fabricated in 3D-printed glass
Open Access
- 1 November 2024
- journal article
- letter
- Published by AIP Publishing in APL Photonics
- Vol. 9 (11)
Abstract
For short sections of fiber tailored to a specific application, fast laser-based manufacturing techniques can be considered as an attractive alternative to the often-cumbersome traditional manufacturing routes. With the use of high-power lasers, localized hot zones that are necessary for glass making can be obtained rapidly. For instance, laser-powder-deposition enables rapid fabrication of short, high gain fibers used in, e.g., distributed feedback fiber lasers (DFFLs). DFFLs offer sought after performance suitable for a broad range of applications in modern photonics, i.e., superior stability and narrower, single-frequency linewidth compared to conventional fiber lasers. Tunable, narrow laser sources with output in an eye-safe spectrum are desired for sensing, signal multiplexing, LIDAR systems, quantum applications, etc. In this work, we present DFFL obtained using laser-powder-deposition made Er-doped silica fiber. Milliwatt level, narrow line lasing (<704 kHz, equipment limited) was obtained using a phase-shifted grating written in 16 mm long fiber. The backward slope efficiency was as high as 24% when pumping at 976 nm. The results presented in this work showcase new possibilities in fiber fabrication that were unlocked through laser-assisted additive manufacturing. This fiber laser sets the stage for the future of rapid fabrication of advanced fiber devices through unconventional manufacturing routes.Keywords
All Related Versions
Funding Information
- Vetenskapsrådet (2022-06180)
- Stiftelsen Tornspiran (894)
- Engineering and Physical Sciences Research Council (EP/R513325/1)
This publication has 30 references indexed in Scilit:
- 3D Laser Engineering of Molten Core Optical Fibers: Toward a New Generation of Harsh Environment Sensing DevicesAdvanced Optical Materials, 2022
- Optical Fiber Sensors in Extreme Temperature and Radiation Environments: A ReviewIEEE Sensors Journal, 2022
- Optical fiber sensing for marine environment and marine structural health monitoring: A reviewOptics & Laser Technology, 2021
- Distributed feedback fiber laser based on a fiber Bragg grating inscribed using the femtosecond point-by-point techniqueLaser Physics Letters, 2018
- Noise spectroscopy with large clouds of cold atomsPhysical Review A, 2016
- Erbium-doped photonic crystal fiber distributed feedback loop laser operating at 1550nmOptics & Laser Technology, 2012
- Fiber grating sensorsJournal of Lightwave Technology, 1997
- 1.55 µm phase-shifted distributed feedbackfibre laserElectronics Letters, 1995
- High pressure H 2 loading as a technique for achieving ultrahigh UV photosensitivity and thermal sensitivity in GeO 2 doped optical fibresElectronics Letters, 1993
- Yb 3+ sensitised Er 3+ doped silica optical fibre with ultrahigh transfer efficiency and gainElectronics Letters, 1991