Concurrent optimization of fracture toughness, thermal conductivity, and tribological behavior in Cf/Si3N4 composites via phase driven selection
Open Access
- 28 March 2026
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Abstract
Carbon fiber–reinforced silicon nitride (C f /Si 3 N 4 ) composites were fabricated by spark plasma sintering (SPS) using α-, β-, and γ-Si 3 N 4 powders to clarify the influence of the initial Si 3 N 4 phase on microstructural evolution and functional properties. The results show that the starting phase significantly affects densification behavior, phase transformation, and mechanical and tribological performance. The composite derived from α-Si 3 N 4 achieved the highest relative density (96.53%) and exhibited an optimal balance of fracture toughness (10.87 MPa m 0.5 ), thermal conductivity (66 W/m K), and stable friction behavior (COF ≈ 0.46). This performance is attributed to the in-situ formation of a self-reinforced β-Si 3 N 4 microstructure during the α → β phase transformation, which promotes crack deflection, crack bridging, and effective load transfer in synergy with carbon fibers. In contrast, β- and γ-Si 3 N 4 –based composites showed lower densification or excessive hardness associated with increased porosity and secondary phase formation. These findings demonstrate that controlling the initial Si 3 N 4 phase provides an effective microstructural design strategy for developing high-performance C f /Si 3 N 4 composites for thermostructural applications such as aerospace brake discs.Keywords
Funding Information
- Iran National Science Foundation
This publication has 40 references indexed in Scilit:
- Comparison of temperature rise in metal, C/C, and C/C-SiC brakes through numerical analysisJournal of Mechanical Science and Technology, 2025
- Effect of Multi-walled Carbon Nanotubes on Material Properties of Spark Plasma Sintered Silicon Nitride-Based Advanced Ceramic CompositesJournal of Materials Engineering and Performance, 2024
- Effect of sintering temperature and time on the microstructure, density, phase, selected mechanical and tribological properties of composite fabricated by the spark plasma sinteringArabian Journal of Chemistry, 2024
- Synthesis and Characterization of Mg/MgO Composites through a Cost-Effective Sintering ApproachJournal of Materials Engineering and Performance, 2023
- The effect of carbon fiber length on the microstructure, selected mechanical, wear, and thermal conductivity of Cf/SiC composite fabricated via spark plasma sintering (SPS) methodJournal of the Korean Ceramic Society, 2023
- Mechanism and feasibility of ultrasonic-assisted milling to improve the machined surface quality of 2D Cf/SiC compositesCeramics International, 2020
- Properties and microstructure evolution of Cf/SiC composites fabricated by polymer impregnation and pyrolysis (PIP) with liquid polycarbosilaneCeramics International, 2017
- Carbon Fibre Reinforced Silicon Carbide Composites (C/SiC, C/C-SiC)2005
- A comparative ab initio study of the ‘ideal’ strength of single crystal α- and β-Si3N4Acta Materialia, 2004
- A fracture mechanics analysis of indentation-induced Palmqvist crack in ceramicsJournal of Materials Science Letters, 1983