The Effect of Carbon Ink Rheology on Ink Separation Mechanisms in Screen-Printing
Open Access
Abstract
Screen-printable carbon-based inks are available in a range of carbon morphologies and concentrations, resulting in various rheological profiles. There are challenges in obtaining a good print when high loading and elasticity functional inks are used, with a trade-off often required between functionality and printability. There is a limited understanding of how ink rheology influences the ink deposition mechanism during screen-printing, which then affects the print topography and therefore electrical performance. High speed imaging was used with a screen-printing simulation apparatus to investigate the effect of viscosity of a graphite and carbon-black ink at various levels of solvent dilution on the deposition mechanisms occurring during screen-printing. With little dilution, the greater relative volume of carbon in the ink resulted in a greater tendency towards elastic behavior than at higher dilutions. During the screen-printing process this led to the ink splitting into filaments while remaining in contact with both the mesh and substrate simultaneously over a greater horizonal length. The location of separating filaments corresponded with localized film thickness increases in the print, which led to a higher surface roughness (Sz). This method could be used to make appropriate adjustments to ink rheology to overcome print defects related to poor ink separation.Keywords
Funding Information
- Engineering and Physical Sciences Research Council (EP/L015099/1)
This publication has 30 references indexed in Scilit:
- High throughput fabrication of mesoporous carbon perovskite solar cellsJournal of Materials Chemistry A, 2017
- The effect of graphite and carbon black ratios on conductive ink performanceJournal of Materials Science, 2017
- Material and process optimization screen printing carbon graphite pastes for mass production of heating elementsJournal of Manufacturing Processes, 2016
- Development of a High Energy Density Flexible Zinc-Air BatteryJournal of the Electrochemical Society, 2016
- Ultra-thin flexible screen printed rechargeable polymer battery for wearable electronic applicationsOrganic Electronics, 2015
- Effect of carbon black on electrical and rheological properties of graphite nanoplatelets/poly(ethylene-butyl acrylate) compositesExpress Polymer Letters, 2015
- The effect of carbon counter electrodes on fully printable mesoscopic perovskite solar cellsJournal of Materials Chemistry A, 2014
- Generic epitaxial graphene biosensors for ultrasensitive detection of cancer risk biomarker2D Materials, 2014
- High-Performance Graphene-Based Transparent Flexible HeatersNano Letters, 2011
- Electrochemical Characterization of Commercial and Home-Made Screen-Printed Carbon ElectrodesAnalytical Letters, 2003