This study investigates the influence of cold rolling (0%, 10%, 20% and 35%) on the corrosion behavior of Alloy 800 (Fe–31Ni–21Cr) in a LiCl–KCl–MgCl2 eutectic mixture at 750 °C for 12 h under Ar–1% O2. Microstructural evolution and corrosion morphology were characterized using SEM, EDS, and EBSD analyses. Cold rolling altered the dominant corrosion mechanism from localized grain boundary attack with deep penetration in the as-received condition to a more uniform corrosion mode with reduced penetration depth. EBSD results indicated increased stored deformation energy in cold-rolled samples, while post-exposure observations revealed recovery and partial recrystallization at 750 °C. The elevated defect density and rapid microstructural evolution enhanced elemental diffusion, promoting more homogeneous dealloying compared to the non-deformed alloy. These findings demonstrate that cold rolling significantly modifies both the microstructural response and corrosion mechanism of Alloy 800 in molten chloride environments.