Chemical treatment of cotton stalk and its effects on mechanical, rheological and morphological properties of Polypropylene/cotton stalk bio‐composites
- 23 May 2017
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 39 (S1)
Abstract
Cotton stalk as commercially viable bio fiber for preparing bio‐composites is explored of late, and the effects of various chemical treatments of cotton stalk fiber on mechanical, rheological and morphological properties of Polypropylene (PP)‐Cotton stalk (CS) bio‐composites are reported in this study. PP‐CS bio‐composites were prepared by varying the amount of cotton stalk from 10 to 50% by melt mixing in twin screw extruder and then injection molded to make specimen. PP‐CS bio‐composites with 50 wt% untreated CS were found to have maximum improvement in tensile modulus (83%), flexural modulus (120%), impact strength (39%). Similar to tensile and flexural modulus, the storage modulus of the PP‐CS composites was also increased with incorporation of CS into the PP matrix. To further increase the interaction between CS and PP matrix, four different chemical treatments (alkali, silane, permanganate solution and stearic acid) were tested for mechanical properties of CS‐PP bio‐composites. Among them KMnO4 treatment was found most effective on overall enhancement of bio‐composite properties. Chemically treated CS‐PP bio‐composites could be an economic viable option to prepare high quality low cost composites for suitable applications in various interior parts of automotives and house hold products. POLYM. COMPOS., 39:E286–E296, 2018. © 2017 Society of Plastics EngineersKeywords
This publication has 50 references indexed in Scilit:
- A novel alumina nanoparticle‐carbon micro‐nanofiber‐polypropylene nanocomposite with improved electrical, thermal, and mechanical propertiesPolymer Composites, 2015
- A Review: Natural Fiber Composites Selection in View of Mechanical, Light Weight, and Economic PropertiesMacromolecular Materials and Engineering, 2014
- Progress Report on Natural Fiber Reinforced CompositesMacromolecular Materials and Engineering, 2013
- Chemically Extracted Cornhusk Fibers as Reinforcement in Light‐Weight Poly(propylene) CompositesMacromolecular Materials and Engineering, 2008
- Influence of Interfacial Properties on Crack Propagation in Fiber‐Reinforced Polymer Matrix CompositesMacromolecular Materials and Engineering, 2008
- Effect of natural fibers on thermal and mechanical properties of natural fiber polypropylene composites studied by dynamic mechanical analysisJournal of Applied Polymer Science, 2006
- Cars from Bio‐FibresMacromolecular Materials and Engineering, 2006
- Biofibres, biodegradable polymers and biocomposites: An overviewMacromolecular Materials and Engineering, 2000
- Crack growth and fracture behavior of fabric reinforced polymer compositesPolymer Composites, 1996
- Steam‐exploded wheat straw fibers as reinforcing material for polypropylene‐based composites. Characterization and propertiesDie Angewandte Makromolekulare Chemie, 1995