Silica Gel‐Immobilized 5‐aminoisophthalohydrazide: A novel sorbent for solid phase extraction of Cu, Zn and Pb from natural water samples
- 18 January 2020
- journal article
- research article
- Published by Wiley in Applied Organometallic Chemistry
- Vol. 34 (4)
Abstract
A novel silica sorbent, silica gel‐immobilized 5‐aminoisophthalohydrazide (SiO2‐APH), was prepared by the condensation of 3‐chloropropyl‐functionalized silica gel with 5‐aminoisophthalohydrazide (APH) derived from dimethyl 5‐aminoisophthalate as a starting material and used for separation and preconcentration of Cu, Zn, and Pb metals in water samples using Flame Atomic Absorption Spectrometry (FAAS). The characterization of the new sorbent was carried out by Elemental Analysis, Thermogravimetric Analysis (TGA) and Fourier Transform Infrared Spectroscopy (FTIR). Important analytical parameters including as pH, amount of sorbent, type and amount of eluting solvent, sample volume, vortex and ultrasonic bath time, matrix ions that effect the developed SiO2‐APH‐solid phase extraction (SPE) method were investigated and optimum parameters were detected. Recoveries of examined metals were obtained as 98% for Cu and Pb and 101% for Zn. The relative standard deviation (RSD, n = 8) of Cu, Zn and Pb metals were 3.2, 2.8 and 1.6%, respectively. Limit of detections (LODs) (n = 10) were found as 2.7 μg L−1 for Cu, 7.4 μg L−1 for Zn and 3.5 μg L−1 for Pb μg L−1. The accuracy of the new method was assessed by analyzing of TMDA‐51.4 and TMDA‐70.2 certified reference materials. The results obtained for metals were in a good agreement with certified values. Addition/recovery test was applied to the real well, river, dam and stream water samples to check the accuracy of the method. The results showed that the developed SiO2‐APH‐SPE method can be effectively used as an alternative method for determination of Cu, Zn, and Pb metals in water samples.Keywords
This publication has 46 references indexed in Scilit:
- Batch and fixed-bed column techniques for removal of Cu(II) and Fe(III) using carbohydrate natural polymer modified complexing agentsCarbohydrate Polymers, 2011
- Preconcentration and determination of Cu(II) in a fresh water sample using modified silica gel as a solid-phase extraction adsorbentJournal of Hazardous Materials, 2010
- Application of a metal ion-imprinted polymer based on salen–Cu complex to flow injection preconcentration and FAAS determination of copperTalanta, 2008
- Synthesis and characterization of monodisperse ultra-thin silica-coated magnetic nanoparticlesNanotechnology, 2008
- Silica gel functionalized with 4-phenylacetophynone 4-aminobenzoylhydrazone: Synthesis of a new chelating matrix and its application as metal ion collectorJournal of Hazardous Materials, 2008
- Preconcentration of Heavy Metals and Matrix Elimination using Silica Gel Chemically Modified with 2,3‐DihydroxybenzaldehydeSeparation Science and Technology, 2007
- Solid Phase Extraction of Molybdenum on Modified Octadecyl Silica Sorbents in the Presence of Cationic Surfactants and on Silica-Based Anionic Exchanger and its Determination by Inductively Coupled Plasma Emission SpectrometryMicrochimica Acta, 2004
- Chemical modification of silica surface by immobilization of functional groups for extractive concentration of metal ionsTalanta, 2004
- Different neutral surfactant template extraction routes for synthetic hexagonal mesoporous silicasJournal of Materials Chemistry, 2002
- Adsorption, preconcentration and separation of cations on silica gel chemically modified with the herbicide 2,4-dichlorophenoxyacetic acidAnalytica Chimica Acta, 2001