A Comparative Study of Three Starting Strategies for an Aero Flywheel Motor Using the Modified DTC Method
Open Access
- 23 April 2019
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 59548-59558
Abstract
An aero flywheel motor (AFM) is an integration of a starter, generator, and inertial flywheel on the traditional aero piston-engine (APE). When performing as a starter, the AFM is responsible for dragging the APE to a high speed (600-800rpm) in a short time (0.2-0.4s). In order to obtain better performance, two modifications are applied to the direct torque control (DTC) method. First, the switching table is modified by using only the positive voltage vectors. Second, a new low-pass filter (LPF) flux estimator is proposed to eliminate the initial flux error using the pulse width modulated (PWM) flux orientation method and the resistance estimation error by using real-time varying (RTV) equivalent resistance. Three DTC-based starting strategies are developed for the AFM, namely, the constant acceleration strategy (CAS), the constant torque strategy (CTS), and the modified constant current strategy (MCCS). The modified and traditional DTC methods are compared for the three starting strategies. The results show that the proposed switching table significantly reduces the switching frequency and the proposed LPF flux estimator improves the convergence of the DTC method; in addition, the robustness against the resistance error is improved. The performances of the three starting strategies based on the modified DTC method are also compared. The results show that the MCCS significantly reduces the peak value of the battery current, thus reducing the capacity, weight, and size of the battery.Keywords
This publication has 23 references indexed in Scilit:
- Optimization for Airgap Flux Density Waveform of Flywheel Motor Using NSGA-2 and Kriging Model Based on MaxPro DesignIEEE Transactions on Magnetics, 2017
- High Ripples Reduction in DTC of Induction Motor by Using a New Reduced Switching TableJournal of Electrical Engineering, 2016
- Direct Torque Control for Permanent-Magnet Synchronous Machines Based on Duty Ratio ModulationIEEE Transactions on Industrial Electronics, 2015
- Direct Torque Control of Permanent-Magnet Synchronous Machine Drives With a Simple Duty Ratio RegulatorIEEE Transactions on Industrial Electronics, 2014
- Torque Ripple Reduction of the Torque Predictive Control Scheme for Permanent-Magnet Synchronous MotorsIEEE Transactions on Industrial Electronics, 2011
- Direct Torque Control of Permanent Magnet Synchronous Motor With Reduced Torque Ripple and Commutation FrequencyIEEE Transactions on Power Electronics, 2010
- Predictive Direct Torque Control for Flux and Torque Ripple ReductionIEEE Transactions on Industrial Electronics, 2009
- Predictive Direct Torque Control for the PM Synchronous MachineIEEE Transactions on Industrial Electronics, 2005
- Modified integrator for voltage model flux estimation of induction motorsIEEE Transactions on Industrial Electronics, 2003
- FOC and DTC: two viable schemes for induction motors torque controlIEEE Transactions on Power Electronics, 2002