Kai-Xiong Lv
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Kai-Xiong Lv has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
Ming Zhou
School of Aerospace, Tsinghua University, Beijing 100084, China
5 shared publications- Jianguo Bu
Department of Military Vehicle Engineering, Army Military Transportation University, Tianjin 300161, China
4 shared publications - Xudong Lan
School of Aerospace Engineering, Tsinghua University, Beijing 100084, China
3 shared publications Bu Jianguo
Tsinghua University, Beijing, China
1 shared publicationJian-Guo Bu
School of Aerospace Tsinghua University Beijing China
1 shared publicationLan Xudong
Tsinghua University, Beijing, China
1 shared publication
Latest Publications
- Open Access
- 23 April 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 59548-59558
A Comparative Study of Three Starting Strategies for an Aero Flywheel Motor Using the Modified DTC Method
An aero flywheel motor (AFM) is an integration of a starter, generator, and inertial flywheel on the traditional aero piston-engine (APE). When performing as a starter, the AFM is responsible for dragging the APE to a high speed (600-800rpm) in a short time (0.2-0.4s). In order to obtain better performance, two modifications are applied to the direct torque control (DTC) method. First, the switching table is modified by using only the positive voltage vectors. Second, a new low-pass filter (LPF) flux estimator is proposed to eliminate the initial flux error using the pulse width modulated (PWM) flux orientation method and the resistance estimation error by using real-time varying (RTV) equivalent resistance. Three DTC-based starting strategies are developed for the AFM, namely, the constant acceleration strategy (CAS), the constant torque strategy (CTS), and the modified constant current strategy (MCCS). The modified and traditional DTC methods are compared for the three starting strategies. The results show that the proposed switching table significantly reduces the switching frequency and the proposed LPF flux estimator improves the convergence of the DTC method; in addition, the robustness against the resistance error is improved. The performances of the three starting strategies based on the modified DTC method are also compared. The results show that the MCCS significantly reduces the peak value of the battery current, thus reducing the capacity, weight, and size of the battery.
- 23 April 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 59548-59558
Open AccessA Comparative Study of Three Starting Strategies for an Aero Flywheel Motor Using the Modified DTC Method
An aero flywheel motor (AFM) is an integration of a starter, generator, and inertial flywheel on the traditional aero piston-engine (APE). When performing as a starter, the AFM is responsible for dragging the APE to a high speed (600-800rpm) in a short time (0.2-0.4s). In order to obtain better performance, two modifications are applied to the direct torque control (DTC) method. First, the switching table is modified by using only the positive voltage vectors. Second, a new low-pass filter (LPF) flux estimator is proposed to eliminate the initial flux error using the pulse width modulated (PWM) flux orientation method and the resistance estimation error by using real-time varying (RTV) equivalent resistance. Three DTC-based starting strategies are developed for the AFM, namely, the constant acceleration strategy (CAS), the constant torque strategy (CTS), and the modified constant current strategy (MCCS). The modified and traditional DTC methods are compared for the three starting strategies. The results show that the proposed switching table significantly reduces the switching frequency and the proposed LPF flux estimator improves the convergence of the DTC method; in addition, the robustness against the resistance error is improved. The performances of the three starting strategies based on the modified DTC method are also compared. The results show that the MCCS significantly reduces the peak value of the battery current, thus reducing the capacity, weight, and size of the battery.
- Open Access
- 11 March 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 34462-34476
Research on a Stepwise Optimization Design of a Flywheel Motor Based on AKMMP
Flywheel motor topology was analyzed, and a main performance optimization model and stator/rotor core loss optimization model were provided. Then, an adaptive Kriging Surrogate model based on the MaxPro design (AKMMP) was used, improving the optimization precision and efficiency. Based on these preliminary outcomes, a stepwise optimization design method of flywheel motor based on AKMMP was proposed. The brief design process includes five steps: 1) initial structure of the flywheel motor: outer rotor, 16 poles/18 slots, double layer concentrated winding, inclined shoulder flat bottom slot, water cooling and F grade insulation. 2) First step optimization: performance optimization using AKMMP to obtain the performance Pareto solution set. 3) According to the performance of a flywheel motor, selection of the suitable case from the performance Pareto solution set. 4) Second step optimization: further optimization of the stator/rotor core loss for the case obtained before using AKMMP. 5) Creation of the final optimization design structure. Then complete the flywheel motor design by the stepwise optimization design method. Finally, the prototype of the flywheel motor was produced, and performance testing was performed.
- 11 March 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 34462-34476
Open AccessResearch on a Stepwise Optimization Design of a Flywheel Motor Based on AKMMP
Flywheel motor topology was analyzed, and a main performance optimization model and stator/rotor core loss optimization model were provided. Then, an adaptive Kriging Surrogate model based on the MaxPro design (AKMMP) was used, improving the optimization precision and efficiency. Based on these preliminary outcomes, a stepwise optimization design method of flywheel motor based on AKMMP was proposed. The brief design process includes five steps: 1) initial structure of the flywheel motor: outer rotor, 16 poles/18 slots, double layer concentrated winding, inclined shoulder flat bottom slot, water cooling and F grade insulation. 2) First step optimization: performance optimization using AKMMP to obtain the performance Pareto solution set. 3) According to the performance of a flywheel motor, selection of the suitable case from the performance Pareto solution set. 4) Second step optimization: further optimization of the stator/rotor core loss for the case obtained before using AKMMP. 5) Creation of the final optimization design structure. Then complete the flywheel motor design by the stepwise optimization design method. Finally, the prototype of the flywheel motor was produced, and performance testing was performed.
- 25 April 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 54 (6) , 1-7
Performance Optimization of Flywheel Motor by Using NSGA-2 and AKMMP
This paper proposes an efficient and accurate surrogate model, called adaptive Kriging model based on maximum projection (MaxPro) design (AKMMP), and establishes the design method by using the non-dominated sorting genetic algorithm with the elitism approach (NSGA-2) and AKMMP to optimize the mass and torque density as the performance parameters of flywheel motor with consideration of rotational inertia. The Pareto optimal solution set of flywheel motor is provided and used as the design border for the flywheel motor. The detailed design parameters are the armature diameter and axial length, rotor and stator split ratios, and permanent magnet width related to the mass and torque density. The brief optimization process includes five steps: A) getting the initial samples by MaxPro design; B) building the Kriging model based on the initial samples; C) optimization by NSGA-2 based on the Kriging model; D) selecting the corrected test point by the proposed sample strategy; and E) judging the convergence. The seven cases with different masses are analyzed, and the finite-element method is used to verify the optimization method.
- 25 April 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 54 (6) , 1-7
Performance Optimization of Flywheel Motor by Using NSGA-2 and AKMMP
This paper proposes an efficient and accurate surrogate model, called adaptive Kriging model based on maximum projection (MaxPro) design (AKMMP), and establishes the design method by using the non-dominated sorting genetic algorithm with the elitism approach (NSGA-2) and AKMMP to optimize the mass and torque density as the performance parameters of flywheel motor with consideration of rotational inertia. The Pareto optimal solution set of flywheel motor is provided and used as the design border for the flywheel motor. The detailed design parameters are the armature diameter and axial length, rotor and stator split ratios, and permanent magnet width related to the mass and torque density. The brief optimization process includes five steps: A) getting the initial samples by MaxPro design; B) building the Kriging model based on the initial samples; C) optimization by NSGA-2 based on the Kriging model; D) selecting the corrected test point by the proposed sample strategy; and E) judging the convergence. The seven cases with different masses are analyzed, and the finite-element method is used to verify the optimization method.
- 15 October 2017
- Published by ASME International
Design Characteristic and Method of the Flywheel Motor of CIHFAPE Used in Helicopter
The flywheel motor is one of the best ways to improve the power-to-weight ratio of heavy fuel helicopter that equipped with compression ignition heavy fuel aircraft piston engine (CIHFAPE). In this paper, a flywheel system is designed, engine start, power demand of helicopter and rotation landing with flywheel motor are studied. Design characteristic of flywheel motor is studied for the application background of the helicopter designed by us, and the design indexes are given. The design method of the flywheel motor is proposed based on this Design characteristic, and the design is given. Finally, the performance of the flywheel motor designed by this method is verified by finite element method (FEM).
- 15 October 2017
- Published by ASME International
Design Characteristic and Method of the Flywheel Motor of CIHFAPE Used in Helicopter
The flywheel motor is one of the best ways to improve the power-to-weight ratio of heavy fuel helicopter that equipped with compression ignition heavy fuel aircraft piston engine (CIHFAPE). In this paper, a flywheel system is designed, engine start, power demand of helicopter and rotation landing with flywheel motor are studied. Design characteristic of flywheel motor is studied for the application background of the helicopter designed by us, and the design indexes are given. The design method of the flywheel motor is proposed based on this Design characteristic, and the design is given. Finally, the performance of the flywheel motor designed by this method is verified by finite element method (FEM).
- 9 May 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 53 (8) , 1-7
Optimization for Airgap Flux Density Waveform of Flywheel Motor Using NSGA-2 and Kriging Model Based on MaxPro Design
The performance of flywheel motor is decided by the airgap flux density waveform. This paper establishes an efficient model to optimize the airgap flux density waveform and provides the Pareto optimal solutions, which give the design boundary of airgap flux density waveform for flywheel motor. The key elements of the structure of permanent magnet and the airgap are considered to optimize the sinusoidal distortion rate and the fundamental amplitude of the airgap flux density waveform. The brief optimization process is three steps: (1) sampling by maximum projection design; (2) building surrogate model by the Kriging method; and (3) multi-objective optimization by non-dominated sorting genetic algorithm with elitism approach (NSGA-2) based on the Kriging model. Then, the Pareto optimal solutions are obtained. The three cases optimized by different strategies are compared, and the optimization method is verified by finite-element method.
- 9 May 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 53 (8) , 1-7
Optimization for Airgap Flux Density Waveform of Flywheel Motor Using NSGA-2 and Kriging Model Based on MaxPro Design
The performance of flywheel motor is decided by the airgap flux density waveform. This paper establishes an efficient model to optimize the airgap flux density waveform and provides the Pareto optimal solutions, which give the design boundary of airgap flux density waveform for flywheel motor. The key elements of the structure of permanent magnet and the airgap are considered to optimize the sinusoidal distortion rate and the fundamental amplitude of the airgap flux density waveform. The brief optimization process is three steps: (1) sampling by maximum projection design; (2) building surrogate model by the Kriging method; and (3) multi-objective optimization by non-dominated sorting genetic algorithm with elitism approach (NSGA-2) based on the Kriging model. Then, the Pareto optimal solutions are obtained. The three cases optimized by different strategies are compared, and the optimization method is verified by finite-element method.
- Open Access
- 17 November 2016
- Published by DEStech Publications in DEStech Transactions on Engineering and Technology Research
- No. amita
Design and Analysis of the Dimension of the PMs for the DMMSM using EMCM
The Dual-magnet memory synchronous motor (DMMSM) utilize two kinds of permanent magnets (PMs), namely the aluminum-nickel-cobalt (Al-Ni-Co) and neodymium-iron-boron (Nd-Fe-B) materials, to provide effective flux-mnemonic feature. The radially placed Nd-Fe-B PM provides main flux, and the tangentially placed Al-Ni-Co PM provides controllable flux. The tangentially placed Al-Ni-Co PM can be forward or backward magnetized by the d-axis current. The flux-control characteristic of the DMMSM affected by the size of the two kinds of PMs has been studied in-depth using the equivalent magnetic circuit method (EMCM) combined with the parallelogram hysteresis model (PHM). And finally, the finite element method (FEM) simulation is carried out to verify the validity of the proposed EMCM.
- 17 November 2016
- Published by DEStech Publications in DEStech Transactions on Engineering and Technology Research
- No. amita
Open AccessDesign and Analysis of the Dimension of the PMs for the DMMSM using EMCM
The Dual-magnet memory synchronous motor (DMMSM) utilize two kinds of permanent magnets (PMs), namely the aluminum-nickel-cobalt (Al-Ni-Co) and neodymium-iron-boron (Nd-Fe-B) materials, to provide effective flux-mnemonic feature. The radially placed Nd-Fe-B PM provides main flux, and the tangentially placed Al-Ni-Co PM provides controllable flux. The tangentially placed Al-Ni-Co PM can be forward or backward magnetized by the d-axis current. The flux-control characteristic of the DMMSM affected by the size of the two kinds of PMs has been studied in-depth using the equivalent magnetic circuit method (EMCM) combined with the parallelogram hysteresis model (PHM). And finally, the finite element method (FEM) simulation is carried out to verify the validity of the proposed EMCM.