Optical proximity correction for anamorphic extreme ultraviolet lithography
- 19 August 2017
- journal article
- Published by SPIE-Intl Soc Optical Eng in Journal of Micro/Nanolithography, MEMS, and MOEMS
- Vol. 16 (04) , 1-9
Abstract
The change from isomorphic to anamorphic optics in high numerical aperture extreme ultraviolet scanners necessitates changes to the mask data preparation flow. The required changes for each step in the mask tape out process are discussed, with a focus on optical proximity correction (OPC). When necessary, solutions to new problems are demonstrated and verified by rigorous simulation. Additions to the OPC model include accounting for anamorphic effects in the optics, mask electromagnetics, and mask manufacturing. The correction algorithm is updated to include awareness of anamorphic mask geometry for mask rule checking. OPC verification through process window conditions is enhanced to test different wafer scale mask error ranges in the horizontal and vertical directions. This work will show that existing models and methods can be updated to support anamorphic optics without major changes. Also, the larger mask size in the Y direction can result in better model accuracy, easier OPC convergence, and designs that are more tolerant to mask errors.Keywords
This publication has 9 references indexed in Scilit:
- Accurate, full-chip, three-dimensional electromagnetic field model for non-Manhattan mask cornersJournal of Micro/Nanolithography, MEMS, and MOEMS, 2016
- Anamorphic high-NA EUV lithography optics2015
- EUV lithography scanner for sub-8nm resolution2015
- Projection optics for EUVL micro-field exposure tools with 0.5 NA2014
- Accurate 3DEMF mask model for full-chip simulation2013
- Model-based stitching and inter-mask bridge prevention for double patterning lithography2013
- Application of the hybrid Hopkins–Abbe method in full-chip OPCMicroelectronic Engineering, 2009
- Status of EUV micro-exposure capabilities at the ALS using the 0.3-NA MET optic2004
- Domain decomposition methods for the rapid electromagnetic simulation of photomask scatteringJournal of Micro/Nanolithography, MEMS, and MOEMS, 2002