GFGermain Fenger

Germain Fenger

*This is an algorithmically generated author record based on publicly available information.

Germain Fenger has a total of 64 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • OPC and modeling solution to support 0.55 NA EUV stitching

    by Dongbo Xu, Qinglin Zeng, Xuefeng Zeng, Werner Gillijns, Vicky Philipsen, Kalaivanan Loganathan, Shubhankar Das, Kia Woon Mah, Victor Blanco, Anuja De Silva, et al.

    BackgroundThe new high numerical aperture (0.55 NA) extreme ultraviolet lithography (EUVL) machine has been developed, which uses an anamorphic projection system with the demagnification of 4× in x-direction and 8× in y-direction. Due to the unchanged 6 in. mask, 0.55 NA EUVL reduces the exposure field size to half-field (26×16.5 mm2). Therefore, the in-die stitching between two exposures might be needed for applications requiring a larger than half-field size. To achieve in-die stitching in practical applications at advanced nodes, performing model-based optical proximity correction (OPC) is an essential step.AimTo build an accurate OPC model, the interaction effects between two stitching fields require some special considerations, including aerial image interaction, optical proximity effect among the stitching patterns, mask absorber reflection, black border proximity effect, and the stray light from the neighboring fields effect. All these effects must be captured by specific models and corrected during OPC. In this paper, we will study the model accuracy and design decomposition rules at the stitching region and provide a solution from an EDA perspective.ApproachIn this paper, the in-die stitching effects and solutions are investigated using a Ta-based dark-field mask. To study the model accuracy at the stitching region, various stitching test patterns have been designed and placed on imec 0.55 NA test masks, and the wafer data are collected from the 0.55 NA EUV scanner at the joint ASML-imec High NA EUV Lithography Lab. To enable effective in-die stitching, the impact of design decompositions on the stitching performance is investigated by performing stitching OPC with the built double exposure OPC model.ResultsThe model accuracy has been evaluated using the obtained wafer data, both for single and double exposures in the stitching region. It is important to use a smart cut approach to decompose the design before running OPC. Comprehensive results provide a detailed comparison between double exposure in the stitching region and single exposure through simulation, with particular emphasis on their respective impacts on overall stitching performance.ConclusionsIn this paper, the in-die stitching effects and OPC solution have been investigated under idealized lithographic conditions, where mask errors, overlay errors between two exposures, and the resist delay effect are not considered. Our initial investigations indicate that double exposure shows promising model accuracy with the existing calibrated resist model (based on single exposure data), and new resist model calibrations might not be necessary for the stitching region. Notably, the wafer critical dimension (CD) in the double exposure region is sensitive to flare values, resulting in wafer CD shifts and requiring accurate flare characterization. The smart cut approach for design decomposition effectively mitigates edge placement error issues across the stitching line. By employing this smart cut approach, the stitching OPC can deliver patterning performance similar to single exposure OPC, with only slightly degraded exposure latitude.


  • Applications of large field of view e-beam metrology to contour-based optical proximity correction modeling

    by Chih-I Wei, Seulki Kang, Sayantan Das, Masahiro Oya, Yosuke Okamoto, Kotaro Maruyama, Germain Fenger, Azat Latypov, Ir Kusnadi, Gurdaman Khaira, et al.

    BackgroundFor complex two-dimensional (2D) patterns, optical proximity correction (OPC) model calibration flows cannot always satisfy accuracy requirements with the standard cutline-based input data. Utilizing after-development inspection e-beam metrology image contours, better model predictions of 2D shapes and wafer hotspots can be realized.AimWe compare model accuracy performance of conventional cutline-based and contour-based OPC models on the regular and hotspots patterns.ApproachBy utilizing image contours that are directly extracted from large field of view (LFoV) e-beam metrology, OPC models were calibrated and verified with both cutline-based and contour-based modeling flows. We also used a wafer sampling plan that contained bridging hotspots. Using that sampling plan, a hotspot-aware three-dimentional resist (R3D) compact model was created.ResultsFirst, a contour-based OPC model was generated with <1 nm root mean square error of contour sites. Compared with cutline-based models, it shows better predictions on 2D feature corners. Second, when combined with a hotspot sampling plan, a hotspot-aware compact model could be generated. The accuracy of hotspot predictions on false positives and false negatives was reduced to around 1% with this approach.ConclusionsOPC model calibration and verification with LFoV image contours provide improved predictions on corner rounding shapes and great potential to increase design space coverage. We also observed improved accuracy of hotspot predictions when using an update hotspot aware model when comparing with that of the OPC model. Furthermore, the combination of R3D and stochastic compact models also demonstrated great potential on predictions of rare wafer failure events.


  • Optical proximity correction for anamorphic extreme ultraviolet lithography

    by Chris Clifford, Michael Lam, Ananthan Raghunathan, Fan Jiang, Germain Fenger, Kostas Adam

    The change from isomorphic to anamorphic optics in high numerical aperture extreme ultraviolet scanners necessitates changes to the mask data preparation flow. The required changes for each step in the mask tape out process are discussed, with a focus on optical proximity correction (OPC). When necessary, solutions to new problems are demonstrated and verified by rigorous simulation. Additions to the OPC model include accounting for anamorphic effects in the optics, mask electromagnetics, and mask manufacturing. The correction algorithm is updated to include awareness of anamorphic mask geometry for mask rule checking. OPC verification through process window conditions is enhanced to test different wafer scale mask error ranges in the horizontal and vertical directions. This work will show that existing models and methods can be updated to support anamorphic optics without major changes. Also, the larger mask size in the Y direction can result in better model accuracy, easier OPC convergence, and designs that are more tolerant to mask errors.


  • Enabling full-field physics-based optical proximity correction via dynamic model generation

    by Michael Lam, Chris Clifford, Ananthan Raghunathan, Germain Fenger, Kostas Adam

    As extreme ultraviolet lithography becomes closer to reality for high volume production, its peculiar modeling challenges related to both inter and intrafield effects have necessitated building an optical proximity correction (OPC) infrastructure that operates with field position dependency. Previous state-of-the-art approaches to modeling field dependency used piecewise constant models where static input models are assigned to specific x/y-positions within the field. OPC and simulation could assign the proper static model based on simulation-level placement. However, in the realm of 7 and 5 nm feature sizes, small discontinuities in OPC from piecewise constant model changes can cause unacceptable levels of edge placement errors. The introduction of dynamic model generation (DMG) can be shown to effectively avoid these dislocations by providing unique mask and optical models per simulation region, allowing a near continuum of models through the field. DMG allows unique models for electromagnetic field, apodization, aberrations, etc. to vary through the entire field and provides a capability to precisely and accurately model systematic field signatures.


  • Directed self-assembly compliant flow with immersion lithography: from material to design and patterning

    by Yuansheng Ma, Yan Wang, James Word, Junjiang Lei, Joydeep Mitra, Juan Andres Torres, Le Hong, Germain Fenger, Daman Khaira, Moshe Preil, et al.

    We present a directed self-assembly (DSA) compliant flow for contact/via layers with immersion lithography assuming the graphoepitaxy process for the cylinders’ formation. We demonstrate that the DSA technology enablement needs co-optimization among material, design, and lithography. We show that the number of DSA grouping constructs is countable for the gridded-design architecture. We use template error enhancement factor to choose DSA material, determine grouping design rules, and select the optimum guiding patterns. Our post-pxOPC imaging data show that it is promising to achieve two-mask solution with DSA for the contact/via layer using 193i at 5 nm node.


  • Directed self-assembly graphoepitaxy template generation with immersion lithography

    by Yuansheng Ma, Junjiang Lei, J. Andres Torres, Le Hong, James Word, Germain Fenger, Alexander Tritchkov, George Lippincott, Rachit Gupta, Neal Lafferty, et al.

    We present an optimization methodology for the template designs of subresolution contacts using directed self-assembly (DSA) with graphoepitaxy and immersion lithography. We demonstrate the flow using a 60-nm-pitch contact design in doublet with Monte Carlo simulations for DSA. We introduce the notion of template error enhancement factor (TEEF) to gauge the sensitivity of DSA printing infidelity to template printing infidelity and evaluate optimized template designs with TEEF metrics. Our data show that source mask optimization and inverse lithography technology are critical to achieve sub-80 nm non-L0 pitches for DSA patterns using 193i.


  • Extreme ultraviolet lithography resist-based aberration metrology

    by Germain L. Fenger, Lei Sun, Sudharshanan Raghunathan, Obert R. Wood, Bruce W. Smith

    Extreme ultraviolet lithography (EUVL) at 13.5 nm is currently the most promising technology for advanced integrated circuit manufacturing nodes. Since the wavelength for EUVL is an order of magnitude smaller than current optical lithography systems (193 nm), aberration tolerances on lens manufacturing must be tightened to avoid image distortion and contrast loss as they scale with wavelength. Therefore, understanding the aberrations of an EUVL system both in idle and production conditions is paramount. This study aims to assess a photoresist-based aberration metrology technique for capturing pupil information of EUVL systems that can be implemented during full system use. Several datasets have been collected on a full-field EUVL system. Various one-dimensional and two-dimensional binary structures were imaged and used for pupil wave front extraction in conjunction with computational modeling and simulations. Results show a successful extraction of a stable aberration signature over several measurements, showing the method to be sensitive to subnanometer levels of intentional aberration change through lens manipulation.


  • High-accuracy optical proximity correction modeling using advanced critical dimension scanning electron microscope–based contours in next-generation lithography

    by Hiroyuki Shindo, Daisuke Hibino, Yuichi Abe, Yutaka Hojyo, Germain L. Fenger, Thuy Do, Ir Kusnadi, John L. Sturtevant, Jeroen Van de Kerkhove, Peter De Bisschop

    Optical proximity correction (OPC) modeling is traditionally based on critical dimension (CD) measurements. As design rules shrink and process windows become smaller, there is an unavoidable increase in the complexity of OPC resolution enhancement technique (RET) schemes required to enable design printability. The number of measurement points for OPC modeling has increased to several hundred points per layer, and metrology requirements are no longer limited to simple 1-D measurements. Contour-based OPC modeling has recently arisen as an alternative to the conventional CD-based method. In this work, the technology of contour alignment and averaging is extended to arbitrary 2-D structures. Furthermore, the quality of scanning electron microscope (SEM) contours is significantly improved in cases where the image has both horizontal and vertical edges (as is the case for most 2-D structures) by a new SEM image method, which we call fine SEM edge (FSE). OPC model calibration is done using SEM contours from 2-D structures. Then, the effectiveness of contour-based calibration is examined by doing model verification. The experimental results of the model quality with innovative SEM contours that was developed by Hitachi High-Technologies Corporation (Ibaraki-ken, Japan) are reported. This combination of advanced alignment and averaging, and FSE technologies, makes the best use of the advantage of contour-based OPC-modeling, and should be of use for next-generation lithography.


  • Design correction in extreme ultraviolet lithography

    by Gian F. Lorusso, Germain L. Fenger, Eric Hendrickx, Ardavan Niroomand

    Extreme ultraviolet (EUV) lithography is currently the most promising technology for advanced manufacturing nodes. This study aims to assess in detail the quality of a full chip optical correction for a EUV design, as well to discuss the available approaches to compensate for EUV-specific effects. Extensive data sets have been collected on the ASML EUV Alpha-Demo Tool using the latest Interuniversity Microelectronics Center baseline resist Shin-Etsu SEVR59. In total ∼1300 critical dimension (CD) measurements at wafer level and 700 at mask level were used as input for model calibration and validation. The smallest feature size in the data set was 32 nm. Both one-dimensional and two-dimensional structures through CD and pitch were measured. The reticle used in this calibration exercise allowed one to modulate flare by varying tiling densities. The shadowing effect was modeled by means of a single bias correction throughout the design. Horizontal and vertical features of different types through pitch and CD were used to calibrate the shadowing correction. The model calibration yielded an root-mean square of ∼1 nm, which was observed to improve by including reticle CD data. An EUV mask fully corrected for optical proximity correction, flare and shadowing was fabricated and qualified, demonstrating the effectiveness of the implemented corrections.


  • Flare in extreme ultraviolet lithography: metrology, out-of-band radiation, fractal point-spread function, and flare map calibration

    by Gian F. Lorusso, Frieda Van Roey, Eric Hendrickx, Germain Fenger, Michael Lam, Christian Zuniga, Mohamed Habib, Hesham Diab, James Word

    The critical role of flare in extreme ultraviolet (EUV) lithography is well known. In this work, the implementation of a robust flare metrology is discussed, and the proposed approach is qualified both in terms of precision and accuracy. The flare measurements are compared to full-chip simulations using a simplified single fractal point-spread function (PSF), and the parameters of the analytical PSF are optimized by comparing the simulation output to the experimental results. After flare map calibration, the matching of simulation and experiment in the flare range from 4 to 12% is quite good, clearly indicating an offset of about 3%. The origin of this offset is attributed to the presence of DUV light. An experimental estimate of the DUV component is found in good agreement with the predicted value.