A novel method for simultaneous measurement of thickness, refractive index, bow, and warp of a large silicon wafer using a spectral-domain interferometer
Authors:
- Jungjae ParkJPJungjae Park
- Jaeseok BaeJBJaeseok Bae
- Yoon-Soo JangYJYoon-Soo Jang
- Jonghan JinJJJonghan Jin
- 5 October 2020
- journal article
- research article
- Published by IOP Publishing in Metrologia
- Vol. 57 (6) , 064001
Abstract
In this study, an optical system for simultaneous measurement of physical thickness, group refractive index, bow, and warp of a large silicon wafer is first proposed based on a reflection-type spectral-domain interferometer. Such key parameters are determined by combining four different optical path differences (OPDs) measured at each sampling point throughout two-axis sample scanning within area of 250 mm by 250 mm. To overcome the measurement limitations by the deflection of a free, unclamped large-sized wafer, two OPDs representing the surface profiles of both sides are utilized to facilitate the thickness and refractive index measurements insensitive to sample inclination. For verification of the proposed method, a 300 mm diameter silicon wafer with nominal thickness of 775 μm was used as a test sample. For measuring the bow and warp with gravity effect compensation, a silicon wafer was measured once again after turning over. Through theoretical analysis on the changes of OPDs with the wafer tilted based on the measured surface profiles, it was verified that the effect of wafer bending on thickness and refractive index measurements can be ignored. The measurement uncertainties ( k = 1) of physical thickness, group refractive index, bow, and warp were evaluated to be approximately 0.692 μm, 0.003, 0.416 μm, and 0.589 μm, respectively.Keywords
Funding Information
- Korea Research Institute of Standards and Science (20011030)
This publication has 22 references indexed in Scilit:
- Vibration-insensitive measurements of the thickness profile of large glass panelsOptics Express, 2015
- Ultrathin Wafer Pre-Assembly and Assembly Process Technologies: A ReviewCritical Reviews in Solid State and Materials Sciences, 2015
- Fizeau-type interferometric probe to measure geometrical thickness of silicon wafersOptics Express, 2014
- Measurement of thickness profile and refractive index variation of a silicon wafer using the optical comb of a femtosecond pulse laserOptics Communications, 2013
- Low cost wafer metrology using a NIR low coherence interferometryOptics Express, 2013
- Modified Roberts-Langenbeck test for measuring thickness and refractive index variation of silicon wafersOptics Express, 2012
- Uncertainty improvement of geometrical thickness and refractive index measurement of a silicon wafer using a femtosecond pulse laserOptics Express, 2012
- Development of a double sided stitching interferometer for wafer characterizationCIRP Annals, 2006
- Scanning wafer thickness and flatness interferometer2004
- Silicon wafer thickness variation measurements using the National Institute of Standards and Technology infrared interferometerOptical Engineering, 2003