Application of Nonlinear Static Procedures for the Seismic Assessment of Regular RC Moment Frame Buildings
- 1 May 2014
- journal article
- Published by Wiley in Earthquake Spectra
- Vol. 30 (2) , 767-794
Abstract
The applicability of nonlinear static procedures for estimating the seismic demands of typical regular RC moment‐resisting frames is evaluated. This work, conducted within the framework of the ATC‐76‐6 project, shows the degree to which nonlinear static methods can characterize global and local response demands vis‐à–vis those determined by nonlinear dynamic analysis for three RC moment‐frame buildings. The response quantities (engineering demand parameters) considered are peak story displacements, story drifts, story shears, and floor overturning moments. The single‐mode pushover methods evaluated include the N2 and the ASCE‐41 coefficient methods. Multi‐modal pushover methods, such as modal pushover analysis and the consecutive modal pushover method, were also evaluated. The results indicate that the relatively good performance of the single‐mode methods observed for low‐rise buildings rapidly deteriorates as the number of stories increases. The multi‐modal techniques generally extend the range of applicability of pushover methods, but at the cost of additional computation and without ensuring the reliability of the results.Keywords
This publication has 22 references indexed in Scilit:
- Comparison of Nonlinear Static Methods for the Seismic Assessment of Plan Irregular Frame Buildings with Non Seismic DetailsJournal of Earthquake Engineering, 2011
- Comparison between non-linear dynamic and static seismic analysis of structures according to European and US provisionsBulletin of Earthquake Engineering, 2010
- The scaled nonlinear dynamic procedureEngineering Structures, 2007
- Evaluation of Modal and FEMA Pushover Procedures Using Strong‐Motion Records of BuildingsEarthquake Spectra, 2005
- Extension of Modal Pushover Analysis to Compute Member ForcesEarthquake Spectra, 2005
- DEVELOPMENT AND VERIFICATION OF A DISPLACEMENT-BASED ADAPTIVE PUSHOVER PROCEDUREJournal of Earthquake Engineering, 2004
- An Incremental Response Spectrum Analysis Procedure Based on Inelastic Spectral Displacements for Multi-Mode Seismic Performance EvaluationBulletin of Earthquake Engineering, 2003
- Theory of principal components analysis and applications to multistory frame buildings responding to seismic excitationEngineering Structures, 2002
- A modal pushover analysis procedure for estimating seismic demands for buildingsEarthquake Engineering & Structural Dynamics, 2001
- Capacity spectrum method based on inelastic demand spectraEarthquake Engineering & Structural Dynamics, 1999