Effect of Sand Particle Size on Sand–Water Flow in a Francis‐99 Distributor
Open Access
- 13 May 2025
- journal article
- Published by Wiley in Energy Science & Engineering
- Vol. 13 (7) , 3753-3764
Abstract
To examine the sand–water flow characteristics in the distributor of the Francis‐99 hydraulic turbine, numerical simulations were conducted using the Mixture multiphase flow model, focusing on the impact of varying sand particle sizes. The findings indicate that near‐wall velocities of sand and water in the fixed and guide vanes of the Francis‐99 hydraulic turbine range from 1.5 to 3.4 m/s and from 2.1 to 11.2 m/s, respectively, with the highest values observed at the tail section. The trajectories of smaller sand particles closely followed the water flow, whereas for particle sizes of around 0.3 mm, acceleration and deceleration processes showed a noticeable lag due to inertia, leading to significant velocity fluctuations compared to smaller particles. The sediment concentration on the front side of the stay and guide vanes initially increased and then decreased along the flow direction, whereas on the back side, a gradual reduction was observed, with the peak sediment concentration occurring at the head. As the sand particle size increased, the uniformity of the sediment concentration distribution on the guide vane surface decreased. When the average sediment concentration (volume fraction) in the flow field was 0.00095, the maximum concentration on the front side of the guide vane reached 0.0025, and the region of high concentration expanded, whereas the back side showed an opposite trend. The results further demonstrate that the arrangement of fixed and guide vanes influences the sediment concentration distribution in the sand–water flow within the hydraulic guide mechanism of the Francis‐99 hydraulic turbine, leading to inconsistencies in sediment distribution patterns on adjacent guide vane surfaces.Keywords
This publication has 24 references indexed in Scilit:
- Analysis on cause of erosion of guide vane of high‐head Francis turbine in sandy riverEnergy Science & Engineering, 2024
- Study on pressure fluctuation and rotating stall characteristics in the vaneless space of a pump-turbine in pump modeJournal of Energy Storage, 2024
- Comparative evaluation of sand erosion in reversible turbine at pump mode and turbine modeJournal of Energy Storage, 2023
- Erosion analysis of radial flow hydraulic turbine components through FLUENT-EDEM couplingPowder Technology, 2023
- Assessment of erosion wear in low specific speed Francis turbine due to particulate flowAdvanced Powder Technology, 2023
- Design and verification of Francis turbine working in sand laden hydro-power plantRenewable Energy, 2023
- Study on sediment erosion of high head Francis turbine runner in Minjiang River basinRenewable Energy, 2022
- Erosion Due to Solid Particle Impact on the Turbine Blade: Experiment and SimulationJournal of Failure Analysis and Prevention, 2019
- Study of the simultaneous effects of secondary flow and sediment erosion in Francis turbinesRenewable Energy, 2016
- Empirical modelling of sediment erosion in Francis turbinesEnergy, 2012