In situ formation of core‐shell rubber particles in polypropylene matrix by melt blending and its effects on the toughness and stiffness of the composites
Authors:
- 18 October 2022
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 62 (12) , 4090-4099
Abstract
Toughening of thermoplastics with a one‐phase impact modifier generally results in significant reduction in stiffness, whereas core‐shell rubber modifiers have extra structural parameters such as core rigidity and shell flexibility, by controlling which the stiffness and impact toughness of their composites can be better balanced. In this study, three kinds of polyethylene (PE) with different rigidity are used respectively to prepare polypropylene/ethylene–propylene rubber/polyethylene (PP/EPR/PE) ternary composites by melt blending, in which the EPR‐to‐PE ratio is 1:1. Atomic force microscopy‐infrared (AFM−IR) and scanning electron microscopy (SEM) results indicate that core‐shell rubber particles with a PE core and an EPR shell are formed in situ and uniformly dispersed in the PP matrix. Mechanical measurements show that at the same modifier content the PP composites toughened with these core‐shell rubber particles exhibit higher toughness and stiffness than that with EPR alone, and the more rigid the PE core, the greater the effects. These results are in quantitative agreement with a recent theoretical model, providing solid experimental evidence in support of the latter. Furthermore, this work demonstrates an economical approach to toughening PP by partial substitution of the EPR with the much cheaper PE for better performance.Keywords
Funding Information
- National Natural Science Foundation of China (21875242, 52073277, U21A2088)
This publication has 47 references indexed in Scilit:
- Largely improved impact toughness of PA6/EPDM-g-MA/HDPE ternary blends: The role of core–shell particles formed in melt processing on preventing micro-crack propagationPolymer, 2013
- The functions of crystallizable ethylene‐propylene copolymers in the formation of multiple phase morphology of high impact polypropyleneJournal of Applied Polymer Science, 2011
- Multilayered core–shell structure of the dispersed phase in high‐impact polypropyleneJournal of Applied Polymer Science, 2008
- Phase separation in incompatible polymer blends: polypropylene-polyethylene system2007
- Effect of Maleation on Polyamide‐6/EPDM‐G‐MAH BlendsSoft Materials, 2007
- Toughening of polypropylene with calcium carbonate particlesPolymer, 2003
- Miscibility and isothermal crystallisation of polypropylene in polyethylene meltsPolymer, 2001
- Effect of glass fiber and maleated ethylene–propylene rubber content on tensile and impact properties of Nylon 6Polymer, 2000
- Composition effect on the core–shell morphology and mechanical properties of ternary polystyrene/styrene–butadiene rubber/polyethylene blendsPolymer, 1999
- AMINES, C=N, AND N=O COMPOUNDS1990