Effect of Maleation on Polyamide‐6/EPDM‐G‐MAH Blends
Authors:
- 1 March 2007
- journal article
- research article
- Published by Taylor & Francis in Soft Materials
- Vol. 4 (1) , 85-100
Abstract
Polyamide‐6 is an engineering thermoplastic. It finds its application in electrical, mechanical, and automotive parts due to its very good processing qualities and excellent barrier properties to oils. Unfortunately, Polyamide‐6 is relatively high priced, has poor impact strength particularly when notched, poor dimensional stability as well as poor barrier properties to moisture, which limits its applicability. The present study deals with the preparation of Polyamide‐6 and modified EPDM blends, varying the MEPDM concentration from 0 to 50 wt%. The objective of this study is to find the effect of maleic anhydride grafted EPDM on various mechanical properties such as tensile, impact, and flexural properties of Polyamide‐6. There was a decrease in tensile and flexural properties, but the notched Izod impact strength increased greatly when the MEPDM content was 30%. Predictive models have been used to explain the tensile modulus and strength. The paper describes a study of the effect of MEPDM on the thermal, electrical, optical, and morphological properties of Polyamide‐6. Studies of the morphology of PA‐6/MEPDM blends showed dispersed particle in the polymeric matrix.Keywords
This publication has 26 references indexed in Scilit:
- Crystal phase and crystallinity of polyamide 6/functionalized polyolefin blendsPolymer, 2000
- Nylon 6 as a modifier for maleated ethylene–propylene elastomersPolymer, 1999
- Reactive compatibilization of aliphatic polyamides with functionalized polyethylenesPolymer, 1997
- Studies on polypropylene composites filled with talc particlesJournal of Materials Science, 1992
- Mechanical Properties of Isotactic Polypropylene/Wood Flour CompositesInternational Journal of Polymeric Materials and Polymeric Biomaterials, 1991
- Effect of multiple morphology on the properties of polypropylene/ethylene-propylene-diene terpolymer blendsPolymer, 1989
- Impact behaviour of nylon-rubber blends: 5. Influence of the mechanical properties of the elastomerPolymer, 1989
- Mechanical properties of polypropylene filled with calcium carbonatePolymer Engineering & Science, 1985
- Studies on binary and ternary blends of polypropylene with SEBS, PS, and HDPE. II. Tensile and impact propertiesJournal of Applied Polymer Science, 1985
- Mechanical properties of blends of nylon 6 with a chemically modified polyolefinJournal of Applied Polymer Science, 1985