A Study on the Dynamic Response of a Small Wind Turbine Blade
Open Access
Abstract
Turbulent wind conditions pose significant challenges to the blade structural reliability of small wind turbines. Different from the authors’ previous work, which mainly focused on the output characteristics of the same 5 kW prototype under variable inflow conditions, this study combines field-test observations with numerical simulations to further investigate the blade structural dynamic responses of a 5 kW variable-pitch wind turbine under both uniform inflow and extreme wind conditions. Owing to the unique pitch-regulation mechanism of the proposed turbine, two pitch-control modes, namely conventional power-limited pitch control and active stall pitch control, are comparatively analyzed to clarify their effects on blade load, stress, and displacement responses. The results indicate that, under uniform inflow conditions, stresses are concentrated near the leading edge of the blade mid-span, while the maximum displacement occurs at the blade tip. Both stress and displacement decrease with increasing conventional pitch angle. Under extreme wind conditions, increasing gust intensity causes a nonlinear growth in blade loads and aggravates blade structural response. During active stall pitch control, the load distribution pattern is generally consistent with that under conventional pitch control, whereas the blade structural response first decreases and then increases as the pitch angle is adjusted toward negative values. Under uniform inflow at the rated wind speed of 11 m/s, the blade-tip maximum displacement decreased from 56.51 mm under the +6° power-limited/reference pitch condition to 48.42 mm under the −6° active-stall-related pitch condition, corresponding to a reduction of approximately 14.3%. These results provide a useful reference for the blade structural design and control optimization of distributed small wind turbines under complex inflow conditions.Keywords
Funding Information
- Inner Mongolia Autonomous Region "Listed and Commanded Project (2024JBGS0025)
This publication has 18 references indexed in Scilit:
- Quasi-symplectic ADRC hybridization to stabilize a flexible truss for a space telescopeAerospace Science and Technology, 2026
- Modeling and dynamics analysis of a rigid-flexible coupled satelliteApplied Mathematical Modelling, 2026
- Effects of Stress Direction and Magnitude on Strength and Failure of Weakly Anisotropic Sandstone under True Triaxial CompressionRock Mechanics and Rock Engineering, 2025
- Fractional derivative viscoelastic models based on L2-1σ formula: modelling and numerical applicationComputers and Geotechnics, 2025
- Experimental study on the effects of turbulence intensity on the aeroelastic stability of wind turbine airfoilsExperimental Thermal and Fluid Science, 2025
- Exploring the performance of horizontal axis wind turbine in yawed turbulent flows through wind tunnel experimentsRenewable Energy, 2025
- Analysis on dynamic interaction between flexible bodies of large-sized wind turbine and its response to random wind loadsRenewable Energy, 2021
- Investigation on the performance of a novel forward-folding rotor used in a downwind horizontal-axis turbineEnergy, 2020
- Wind shear effect on aerodynamic performance and energy production of horizontal axis wind turbines with developing blade element momentum theoryJournal of Cleaner Production, 2019
- An efficient procedure for the calculation of the stress distribution in a wind turbine blade under aerodynamic loadsJournal of Wind Engineering and Industrial Aerodynamics, 2018