Jingsen Chen
Research Subjects
Jingsen Chen has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Aoxiang Jiang
Jiangsu Xinneng Haili Offshore Wind Power Co., Ltd., Nantong 226400, China
1 shared publication - Daorina Bao
School of Energy and Power Engineering, Inner Mongolia University of Technology, Hohhot 010010, China
1 shared publication - Ruijun Cui
School of Energy and Power Engineering, Inner Mongolia University of Technology, Hohhot 010010, China
1 shared publication - Shenao Luo
School of Energy and Power Engineering, Inner Mongolia University of Technology, Hohhot 010010, China
1 shared publication - Xiaodong Guo
School of Urban Transportation and Logistics, Shenzhen Technology University, Shenzhen 518118, China
1 shared publication - Yongshui Luo
Yunda Energy Technology Group Co., Ltd., Hangzhou 311106, China
1 shared publication
Latest Publications
- Open Access
A Study on the Dynamic Response of a Small Wind Turbine Blade
Turbulent wind conditions pose significant challenges to the blade structural reliability of small wind turbines. Different from the authors’ previous work, which mainly focused on the output characteristics of the same 5 kW prototype under variable inflow conditions, this study combines field-test observations with numerical simulations to further investigate the blade structural dynamic responses of a 5 kW variable-pitch wind turbine under both uniform inflow and extreme wind conditions. Owing to the unique pitch-regulation mechanism of the proposed turbine, two pitch-control modes, namely conventional power-limited pitch control and active stall pitch control, are comparatively analyzed to clarify their effects on blade load, stress, and displacement responses. The results indicate that, under uniform inflow conditions, stresses are concentrated near the leading edge of the blade mid-span, while the maximum displacement occurs at the blade tip. Both stress and displacement decrease with increasing conventional pitch angle. Under extreme wind conditions, increasing gust intensity causes a nonlinear growth in blade loads and aggravates blade structural response. During active stall pitch control, the load distribution pattern is generally consistent with that under conventional pitch control, whereas the blade structural response first decreases and then increases as the pitch angle is adjusted toward negative values. Under uniform inflow at the rated wind speed of 11 m/s, the blade-tip maximum displacement decreased from 56.51 mm under the +6° power-limited/reference pitch condition to 48.42 mm under the −6° active-stall-related pitch condition, corresponding to a reduction of approximately 14.3%. These results provide a useful reference for the blade structural design and control optimization of distributed small wind turbines under complex inflow conditions.
Open AccessA Study on the Dynamic Response of a Small Wind Turbine Blade
Turbulent wind conditions pose significant challenges to the blade structural reliability of small wind turbines. Different from the authors’ previous work, which mainly focused on the output characteristics of the same 5 kW prototype under variable inflow conditions, this study combines field-test observations with numerical simulations to further investigate the blade structural dynamic responses of a 5 kW variable-pitch wind turbine under both uniform inflow and extreme wind conditions. Owing to the unique pitch-regulation mechanism of the proposed turbine, two pitch-control modes, namely conventional power-limited pitch control and active stall pitch control, are comparatively analyzed to clarify their effects on blade load, stress, and displacement responses. The results indicate that, under uniform inflow conditions, stresses are concentrated near the leading edge of the blade mid-span, while the maximum displacement occurs at the blade tip. Both stress and displacement decrease with increasing conventional pitch angle. Under extreme wind conditions, increasing gust intensity causes a nonlinear growth in blade loads and aggravates blade structural response. During active stall pitch control, the load distribution pattern is generally consistent with that under conventional pitch control, whereas the blade structural response first decreases and then increases as the pitch angle is adjusted toward negative values. Under uniform inflow at the rated wind speed of 11 m/s, the blade-tip maximum displacement decreased from 56.51 mm under the +6° power-limited/reference pitch condition to 48.42 mm under the −6° active-stall-related pitch condition, corresponding to a reduction of approximately 14.3%. These results provide a useful reference for the blade structural design and control optimization of distributed small wind turbines under complex inflow conditions.