Thermal Stresses Induced by Knocking Combustion in Spark-Ignition Engines
Author:
- 6 March 2000
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
Knocking combustion severely limits the performance and life of spark-ignition engines. Knock damage typically involves surface erosion of pistons and heads, which is thought to result from a combination of shockwave pressure and thermal stresses. This work investigates the contribution of thermal stresses to knock-induced erosion damage by modelling the temperature profile within the walls, using existing thin-film thermocouple data and 1-dimensional transient heat transfer relationships. The temperature profile is then used to establish the thermal stresses through the wall (of the piston or cylinder head). Results demonstrate that knocking combustion causes thermal stresses between 2 to 3 times greater than that of non-knocking combustion. For knocking conditions, tensile and compressive stresses exceed 20 MPa and 90 MPa respectively, with the maximum tensile stresses occurring about 1mm below the hot surface and the maximum compressive stresses at the hot surface. Due to combination of material properties, cast iron surfaces are shown to produce significantly lower thermal stresses than aluminium alloys. A shear stress cycle reversal is also identified which would play a significant role in the surface destruction process. This research sheds new light on the knock-erosion process by revealing the importance of thermal stresses on the surface damage process.Keywords
This publication has 11 references indexed in Scilit:
- Knock Erosion in Spark-Ignition EnginesSAE International Journal of Advances and Current Practices in Mobility, 1996
- Knock Damage Mechanisms in Spark-Ignition EnginesSAE International Journal of Advances and Current Practices in Mobility, 1994
- Surface erosion by high-speed combustion wavesSymposium (International) on Combustion, 1994
- Role of Exothermic Centres on Knock Initiation and Knock DamageSAE International Journal of Advances and Current Practices in Mobility, 1990
- Theoretical and Experimental Investigation of Knock Induced Surface DestructionSAE International Journal of Advances and Current Practices in Mobility, 1990
- Effect of Knock on Time-Resolved Engine Heat TransferSAE International Journal of Advances and Current Practices in Mobility, 1989
- Analysis of Local Pressures, Surface Temperatures and Engine Damages under Knock ConditionsSAE International Journal of Advances and Current Practices in Mobility, 1983
- Thermal Combustion Modeling — Theoretical and Experimental Investigation of the Knocking ProcessSAE International Journal of Advances and Current Practices in Mobility, 1982
- Thermal Loading of a Petrol EngineProceedings of the Institution of Mechanical Engineers, 1973
- Theory of Elasticity (3rd ed.)Journal of Applied Mechanics, 1970